Prothane 191827 Ball Joint Dust Boots

  • 191827 360image 1
  • 191827 Ball Joint Dust Boots
  • 191827 Ball Joint Dust Boots
  • 191827 Ball Joint Dust Boots
  • 191827 Ball Joint Dust Boots
  • 191827 Ball Joint Dust Boots
  • 191827 360image large 1

Ball Joint Dust Boots

Manufacturer: Prothane
Part Number: 191827

:(?)
Black
Red
Price: $5.54

check_box In Stock check_box Ships Immediately


  • 2 of 60517 - 0.550 Top I.D. X 1.438 Bottom I.D. X 1.340 Height
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."

question_answer Ask us a Question

FitmentBall Joint Dust Boots 191827 fits these vehicles:

Prothane Polyurethane Universal Dust Boots

Prothane Dust Boots

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Prothane makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water, and snow.

How-to obtain measurements

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call. It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.

Prothane Dust Boots
Prothane Dust Boots

After Measureing Your Dust Boots

Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.

Prothane 191827

Product Reviews for

5 Star (4)
80%
4 Star (0)
0%
3 Star (1)
20%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Prothane 191827

5 out of 5 based on 5 user reviews. Write a Review

W
verified_user

starstarstarstar_borderstar_border" It was not the exact part for my application "

I used the part and it fit ok but not the original part. Not your fault. The product was very well made but just not for my car. Editors note: This dust boot is a universal fit. Not for a specific application.

verified_user Verified Buyer - - . Prothane 191827 - 3 out of 5
G
verified_user

starstarstarstarstar" Nice product "

Talking with the sales/tech mentioned that I might need to trim the boot. Trimmed .250 off of the to top to fit. Editors Note: When working with any universal dust boot or bushing they may have to be modified to fit. Customer service reps try to select a universal part that will closely fit as possible without modification.

verified_user Verified Buyer - - . Prothane 191827 - 5 out of 5
G
verified_user

starstarstarstarstar" Nice product "

Talking with the sales/tech mentioned that I might need to trim the boot. Trimmed .250 off of the to top to fit. Editors Note: When working with any universal dust boot or bushing they may have to be modified to fit. Customer service reps try to select a universal part that will closely fit as possible without modification.

verified_user Verified Buyer - - . Prothane 191827 - 5 out of 5
G
verified_user

starstarstarstarstar" Nice product "

Talking with the sales/tech mentioned that I might need to trim the boot. Trimmed .250 off of the to top to fit. Editors Note: When working with any universal dust boot or bushing they may have to be modified to fit. Customer service reps try to select a universal part that will closely fit as possible without modification.

verified_user Verified Buyer - - . Prothane 191827 - 5 out of 5

Fitment for 191827