• 19402 Front Sway Bar Endlinks
  • 19402 Front Sway Bar Endlinks
  • 19402 Front Sway Bar Endlinks
  • 19402 Front Sway Bar Endlinks

Front Sway Bar Endlinks

Manufacturer: Prothane
Part Number: 19402
Rating 69


Price: $16.17

In Stock Ships Immediately

FitmentFront Sway Bar Endlinks 19402 fits these vehicles:
  • 8 of End Link Bushings - 60353
  • 8 of Dished Washers
  • 2 of Metal Sleeves - 60663
  • 2 of Hex Bolts - 1135
  • 2 of Nylon Lock Nuts
  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."

Prothane Sway Bar Endlinks

Sway bars are incredibly important to both driver control and safety, and if sway bars are that important, then it stands to reason that the part tying the sway bar to the rest of the suspension is just as important. Used to connect your sway bar to the control arms, endlinks are what allows your sway bar to do it's job. Without good endlinks your sway bar won't be able to perform at it's best.

Sway Bar Endlink Box

Prothane Endlink

Coverage and Performance

OE replacement endlinks come with rubber bushings. While rubber bushings are good at absorbing and redirecting impacts, they don't last long. Prothane's endlinks are a significant upgrade over OE replacements. Including brand-new hardware as well as new polyurethane bushings, Prothane's endlinks are made to be incredibly durable. To top it off, each of Prothane's endlinks are covered by a lifetime warranty handled in-house here at DST.

Prothane 19402

Product Reviews for Front Sway Bar Endlinks 19402

Prothane 19402

5 out of 5 based on 69 user reviews. Write a Review

Installed easily and work very well.
5 out of 5 - Review 2 Years Later
drew macmicheal - . Prothane 19402
Exactly correct. Fit nicely and can't wait to take the motor home for a "twisty" cruise. The old ones were shot and falling out so these would be an improvement but the much higher durometer rating should solve some other issues also.
5 out of 5 - Super
Jeffry Mooney - . Prothane 19402
Installed these instead of OEM replacements for the simple fact that these are cheaper in price. They work as they should and have held up vastly better then OEM.
5 out of 5 - Cheap price and Effective
Erik - . Prothane 19402
the endlinks are great but it took more than 2 weeks to get the red ones in the length i needed
5 out of 5 - time
brent luce - . Prothane 19402

Product Reviews for Prothane Front Sway Bar Endlinks

Everything still working great. No problems.
5 out of 5 - Review 1 Year Later
Edward N. Rambo - . Prothane 8403
Going on a year installed, great product.
5 out of 5 - Review 1 Year Later
Chad Obearle - . Prothane 19419
Great quality and fit.
5 out of 5 - Great
Joe Acosta - . Prothane 19420
Great quality and fit.
5 out of 5 - Great
Joe Acosta - . Prothane 19406
I neglected to put these in 25 years ago when I did the restoration on my 1972 BMW2002ii and Im glad I did so now. The stock sway bar is a bit too compliant, even with the rubber bushings compressed to their limit. These urethane bushings cant be compressed significantly and thus provide maximum stability. This is a good, very inexpensive upgrade.
5 out of 5 - Great addition
Gordon Paine - . Prothane 3401_Front
Parts fit as expected, overall quality is excellent.\nThe urethane selection is a superb choice for an upgrade.
5 out of 5 - Excellent
Ricky A. Kinser - . Prothane 8401
Very happy with these, far better than original ones.
5 out of 5 - Review 1 Year Later
Robert Patterson - . Prothane 19408
Everything still working great. No problems.
5 out of 5 - Review 1 Year Later
Edward N. Rambo - . Prothane 8403
The hardest part of the job was getting my old crusty endlinks off. These new endlinks seem to really keep the car from rolling during tight turns. They look as good as they did last year when I installed them and I live in a state that heavily salts the roads during winter.
5 out of 5 - Review 1 Year Later
David Stout - . Prothane 4401
The Sway-bar links that I had a metal insert welded in so I could not use the Bushings. So I gave them to a friend with the same Pick-up newer model and the bushings fit perfect. If you get up against a wall or barrier while traveling through a construction zone you can hear the bushing squeaking. It sounds like a U-Joint is going bad. On a positive note the bushing are holding up well with no clicking sound coming for them and that why they were replaced. Editors Note: It is very important that the proper grease and amount is used. Prothane recommends that you their Super Grease specially formulated for poly urethane bushings.
5 out of 5 - Review 2 Years Later
John Aleman - . Prothane 881166

Click on the image and drag left or right to rotate.