add_shopping_cart Suggested Parts 1keyboard_arrow_down
DHW013 Hardware Kit for Body Mount Bushings Replacement bolts and washers for your old corroded and rusted out hardware.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Polyurethane.
Price: $140.55
Warranty: Lifetime Warranty
Energy Suspension HyperFlex Body to Frame Mount Bushings
Energy Suspension's Hyperflex polyurethane is a stronger material for a body to frame mount bushing. Polyurethane is able to handle the constant beating a body mount takes and is not vulnerable to road grime or UV rays. With Energy Suspension's body mounts, you can protect your body to frame attachment, and your smooth ride, for years to come.
Replacing the Faulty Rubber
O.E. Manufacturer's use soft rubber body mounts to attach a body and frame. Over time these bushings deteriorate due to wear and tear, UV rays or road grime. Once the rubber starts to fail, the attachment point is compromised and the bushing can literally just fall off. Without body to frame mount bushings, the smooth connection between your body and frame is gone and your smooth ride is gone with it. Now bumps and potholes will really put your seatbelt to work.
Product Reviews for Body Mount Bushings Kit - Chevrolet K1500 4WD - 3.4122
- 5 Star (7)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.4122
starstarstarstarstar" Nice kit "
I like the kit for what it is, but it wouldve been nice to have the hard ware with it. I had a couple of bad bolts and the bolt kit wasnt available at the time. All in all I would buy it again. Thanks
verified_user Verified Buyer - Jeremy Hurm - . Energy Suspension 3.4122 - 5 out of 5starstarstarstarstar" Great part. "
This part number fits a 1993 GMC C3500\nCrew cab dually. This fitment is not acknowledged on the website, but I am confirming it. Rock Auto had it wrong. They sent me a set that did not fit. It was for a K3500. suspension.com advised me that the 3.4122 was the correct kit. Happy now.
verified_user Verified Buyer - Douglas L Miller - . Energy Suspension 3.4122 - 5 out of 5starstarstarstarstar" Good "
It was work that I didnt want to do every day, but it was easy to put in. The polyurethane bushings are a little stiffer than the stock pieces but not too stiff. I am happy with it.
verified_user Verified Buyer - Oliver Roemer - . Energy Suspension 3.4122 - 5 out of 5starstarstarstarstar" Good "
It was work that I didnt want to do every day, but it was easy to put in. The polyurethane bushings are a little stiffer than the stock pieces but not too stiff. I am happy with it.
verified_user Verified Buyer - Oliver Roemer - . Energy Suspension 3.4122 - 5 out of 5compare_arrows Compare with Similar Parts
question_answer Customer Questions and Answers
- Question:
- Does Energy Body Mount Bushing kit part number 3.4122 fit a 1997 Chevrolet K3500 crew cab ?
- Answer:
- No, Energy Body Mount Bushing kit part number 3.4122 is fitment for Extra Cab/Extended Cab Models only.
- Question:
- Do you have any hardware available for part number 3.4122 on my 1995 chevy k1500 extended cab?
- Answer:
- Yes, for the 1995 chevy k1500 extended cab, you will need part number dhw013 for the hardware kit to go with the 3.4122 body mount bushings.
- Question:
- Will I need to reuse my stock hardware for kit number 3.4122? will there be instructions for installation?
- Answer:
- The 3.4122 will require you to reuse your stock hardware. This kit will include install instructions to help install these body mounts bushings.
- Question:
- My question is why are your new mounts lower than my stock wore out mounts. I had to stack washers to get the body lines right. I only put 2 on for now, the 2 you have for the front cowl would be ideal for all of em. If you are supposed to add washers , why don't you add them to the hardware kit which I've also purchased?
- Answer:
- To answer your question these mount come pre-compressed so they will look smaller than the OEM mount but will fit the same holes. The washer you use with installing the kit is your originally OEM washers. Energy just does not make hardware for this k kit but since we as a dealer saw this as a problem we now offer a separate hardware kit part number dhw013 https://www.suspension.com/dhw013 ...see more
- Question:
- I need to replace all the body mounts and I need all the hardware. Bolts, washers, etc. do you have anything like this for this type of vehicle?
- Answer:
- Energy 3.4122 is the body mounts and the hardware that will work with those is: DHW013
