7318 | Escalade | Rear Control Arm Bushing Replacement Kit

  • 7318 Rear Control Arm Bushings
  • 7318 Rear Control Arm Bushings
  • 7318 Rear Control Arm Bushings
  • 7318 Rear Control Arm Bushings
  • 7318 Rear Control Arm Bushings

Rear Control Arm Bushings

Manufacturer: Prothane
Part Number: 7318

:(?)
Black
Red (Accept Special Order, 4-8 weeks)
Price: $107.31

check_box In Stock check_box Ships Immediately


  • 4 of Super Grease - 19-1750-001
  • 6 of Metal Sleeves - 60669 (7/8 X .156 X 2.000 inches)
  • 4 of Metal Sleeves - 60698 (7/8 X .156 X 2.600 inches)
  • 4 of Rear Upper Thrust Washers - 64416
  • 4 of Rear Upper Thrust Washers - 64417
  • 2 of Track Rod Thrust Washers - 64418
  • 2 of Track Rod Flange Bushings - 64419
  • 4 of Upper Rear Flange Bushings - 64420
  • 4 of Lower Rear Flange Bushings - 64421
Suggested part for 7318: 191750
191750 Prothane Super Grease - 3 Pack
3 - 5ML High Performance Grease by Prothane

Suggested part for 7318: 191751
191751 Super Grease - 14 oz. Tube
14 Ounce Tube Suitable for Grease Guns

  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Cross Reference from 7318 to 3.3196
Energy Suspension 3.3196
Polyurethane.
Price: $207.02
Warranty: 7 Year Warranty

question_answer Ask us a Question

FitmentRear Control Arm Bushings 7318 fits these vehicles:

7318 | Escalade | Rear Control Arm Bushing Replacement Kit

Footnotes
  • One Set Will Cover the Left and Right Side

Prothane Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace those faulty O.E. rubber bushings with Prothane's polyurethane control arm bushings. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency.

Prothane's polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.

Prothane Control Arm Bushings Box
Worn Rubber Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Use Prothane's Super Grease

Control arm bushings are a high stress part, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.

Prothane Control Arm Grease
Fitment for 7318

compare_arrows Compare with Similar Parts


This Part
7318 compare
$107.31
  • star_borderstar_borderstar_borderstar_borderstar_border
  • This part
  • Bushing Material: Polyurethane
Energy Suspension
Energy Suspension compare
$207.02
($99.71) more expensive
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Bushing Material: Polyurethane

question_answer Customer Questions and Answers


Question:
Will the Prothane rear control arm bushing kit (7318) fit my vehicle. I didnt see it listed in the fitment list, but I did see that the cross-referenced Energy Suspension (3.3196) does. I have found other sources that indicate that it will fit though.
Answer:
Kit 7318 is for the Avalanche/Suburban. Not the 2010 Camaro. The 3.3196 is the rear control arm bushings for the 2010 Camaro.