Universal Shock Bushings - 9.8147

  • 9.8147 360image 1
  • 9.8147 Shock Eye Bushings - 98147
  • 9.8147 Shock Eye Bushings - 98147
  • 9.8147 Shock Eye Bushings - 98147
  • 9.8147 Shock Eye Bushings - 98147
  • 9.8147 Shock Eye Bushings - 98147
  • 9.8147 360image large 1

Shock Eye Bushings - 98147

Manufacturer: Energy Suspension
Part Number: 9.8147

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $5.30

check_box In Stock check_box Ships Immediately


  • 4 - 8060 - 1/2 Straightwall Shock Bushings
Suggested part for 9.8147: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

Suggested part for 9.8147: 9.11104
9.11104 Formula 5 Prelube - 8oz. Tub Polyurethane Bushing Grease
8 ounce tub of High Performance Grease by Energy

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

question_answer Ask us a Question

FitmentShock Eye Bushings - 98147 9.8147 fits these vehicles:
Details
Polyurethane Shock Eye Bushings
Genuine Energy Suspension Product!

Universal Shock Bushings - 9.8147

Half of standard straight eye (half of 9.8116 bushing set)
Part Number: 9.8147
  • 5/8 Inch I.D.
  • 1 1/16 Inch O.D.
  • 3/4 Inch Long
  • 4 Bushings Per Set
Footnotes
  • No Footnotes From Energy Suspension

Energy Suspension Shock Mount Bushings

Shocks are actually part of a two-component system; your coil springs and shocks work together to maintain your control over the vehicle on rough surfaces while also smoothing out your ride. Your shocks are connected to the frame with a set of shock mount bushings. These bushings allow your shock to perform at it's best while also helping to reduce road vibrations.

While many OE shock mount bushings are made of rubber, Energy Suspension makes bushings with their Hyperflex polyurethane. Rubber is a softer material that's better for reducing vibrations but doesn't last long when pitted against high-stress environments. Hyperflex polyurethane, on the other hand, is much more durable than rubber, easily able to withstand both physical wear and road contamination. This added durability also means an increase to firmness and, by extension, NVH. However, the enhanced dependability of your suspension is often worth a slight increase to vibration. Plus, Energy Suspension covers all of their shock mount bushings with a two-year warranty handled in-house here at DST.

energy box
Energy Suspension 9.8147

Product Reviews for Universal Shock Bushings - 9.8147

5 Star (6)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 9.8147

5 out of 5 based on 6 user reviews. Write a Review

R
verified_user

starstarstarstarstar" Review 1 Year Later "

Very good product. Holding up very well.\n

verified_user Verified Buyer - - . Energy Suspension 9.8147 - 5 out of 5
R
verified_user

starstarstarstarstar" Review 1 Year Later "

Very good product. Holding up very well.\n

verified_user Verified Buyer - - . Energy Suspension 9.8147 - 5 out of 5
L
verified_user

starstarstarstarstar" Great "

I knew I would need to modify them for my ride, and that is what I did! They should work for a long time to come!\n\n

verified_user Verified Buyer - - . Energy Suspension 9.8147 - 5 out of 5
P
verified_user

starstarstarstarstar" good "

I used these bushings for a 1997 Polaris Indy Classic. The main shock on the rear suspension is made by Gabriel; they dont make snowmobile shocks anymore and want nothing to do with it. In addition Polaris had no part number for these bushings, only for the entire shock. So I found these bushings with the correct inside diameter, but the outside diameter was too large for the shock eye. I then mounted a bushing on the end of my drill press using the bolt from the suspension and turned down the outside diameter using a wood rasp, it worked well. I have no idea how long it will last but the material is pretty stout.

verified_user Verified Buyer - - . Energy Suspension 9.8147 - 5 out of 5