• 9.8170 Pivot Style Universal Endlinks
  • 9.8170 Pivot Style Universal Endlinks
  • 9.8170 Pivot Style Universal Endlinks

Pivot Style Universal Endlinks

Manufacturer: Energy Suspension
Part Number: 9.8170
Rating 130

Options


Black
Red
Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Quantity:
Price: $86.42

In Stock Ships Immediately


Details
4-3/4 Inch to 5-3/4 Inch Adjustable.
More and more late model vehicles are utilizing pivot style end links, which the dealership tends to fetch a pretty penny for. So ES has designed a pivot style end link to outlast and outperform the OEM counterpart. Our Universal pivot style end links are available in 4 different sizes which are in 1 inch increments, each offering 1 inch of adjustability. They are all armed with our patented Hyper-Flex polyurethane, rigid 3/4 inch shaft, bulletproof black coating and 3/8 inch - 16 bolt ends. In the rare occurrence that our bushings do wear out, replacements are also sold separately.
FitmentPivot Style Universal Endlinks 9.8170 fits these vehicles:
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

Energy Suspension Sway Bar Endlinks

While your sway bar is intended to maximize contact to the road, it can't accomplish this task on it's own. Sway bar endlinks are just as important as the sway bar itself. Connecting your sway bar to the rest of the suspension, these endlinks allow the sway bar to perform it's task. Should your endlinks wear down or fail completely, you will inevitably feel increased body roll while cornering.

Energy Suspension Sway Bar Endlinks box

Energy Suspension Endlink

Coverage and Performance

OE replacements will undoubtedly come with rubber bushings. While rubber can easily absorb vibrations from the road, it doesn't hold up for long. Crafted using Hyperflex polyurethane bushings and including a brand new set of hardware, Energy Suspension's endlinks are a significant upgrade over OE replacements. The Hyperflex polyurethane bushings are resistant to both chemicals and physical wear, increasing the endlink's durability and performance exponentially. Plus, Energy Suspension covers all of their endlinks with a two-year warranty handled in-house here at DST.

Energy Suspension 9.8170

Product Reviews for 9.8170

Energy Suspension 9.8170



5 out of 5 based on 130 user reviews. Write a Review

Just had the end-links installed on the rear of my 06 trailblazer ss. My mechanic at the chevy dealership liked the design. Being able to adjust them was key, since the truck was lowered 1-1/2" in the rear. I will be ordering another pair for the front, and the front upper and lower control arm bushing set too. Thanks.
5 out of 5 - looks solid and well constructed
daryl barrett - . Energy Suspension 9.8170

Product Reviews for Energy Suspension

Excellent replacement for originals with no noticeable wear.
5 out of 5 - Review 2 Years Later
Michael J Simpson - . Energy Suspension 9.8106
HD parts built to last, pride in products,at my door in 2 days. 5 STAR!
5 out of 5 - Great product
Stephen Frederick Kacpura - . Energy Suspension 9.8167
I did not understand the measurement system to order correct length. I order part that was too long. But the longer length allowed minor mods to make it work.
5 out of 5 - Good quality
Lewis C. Hoy - . Energy Suspension 9.8121
I knew the inside diameters were too short to fit my end link bolts. I drilled the Grommets out using a sharp 1/2" bit. They finished slightly smaller ID but fit the bolts snugly. I replaced all 8 grommets on the rear end links. After installation, my 14 ton motorhome handles GREAT! Body sway is significantly reduced, it corners like its on rails! The rear sway bar is about 2 1/2 inches in diameter so you know theres a lot of force available. If needed, I will replace these grommets with the same part.
5 out of 5 - Nice, well made and SOLID!
Charles A Goodman - . Energy Suspension 9.8103
They are holding up good.
5 out of 5 - Review 2 Years Later
Gary Nielsen - . Energy Suspension 9.8117
Installed and working great as of present. No issues. Worth the investment as the car handles better as well with additional poly parts that were purchased.
5 out of 5 - Review 2 Years Later
Parvin John - . Energy Suspension 9.8121
Its holding up well.
5 out of 5 - Review 2 Years Later
Steve Newnom - . Energy Suspension 9.8167
I was impressed with the part.
5 out of 5 - Great
WILLIAM FISCHER - . Energy Suspension 9.8124
Super product easy install.\nLiked the different thickness bushings to fine tune the sway bar.
5 out of 5 - Sweet product!
Steve Beattie - . Energy Suspension 9.8166
Still doing their job as well as the day I installed them .... Great parts \n thanks \n G
5 out of 5 - Review 2 Years Later
Greg - . Energy Suspension 9.8149

Click on the image and drag left or right to rotate.