unarchive In The Box of bck001 keyboard_arrow_down
- BCF80Z - Front Sway bar
- 27mm Solid Spring Steel Bar, 3 point adjustable
- BCR22XXZ - Rear Sway bar
- 27mm Solid Spring Steel Bar, 3 point adjustable
- KLC178 - Front Sway Bar End Link Kit
- 2 of Sway bar link assembly 370-395mm, on-car adjustable, 10mm Ball Joint ends
- KLC144 - Rear Sway Bar End Link Kit
- 2 of Rear Sway Bar End Link 90-115mm, on-car adjustable, 10mm Ball Joint ends
- KLL127 Alloy Lateral Locks
- 4 of Sway bar alloy lateral locks 27mm
add_shopping_cart Suggested Parts 5keyboard_arrow_down
Bushing kit that replaces OE bushings most responsible for poor handling performance.
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
DST Silver Color - Limited Lifetime Warranty
Whiteline provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
lock Warranty Information keyboard_arrow_down
- WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.
WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
Vehicles BCK001 Fits
This is Whiteline's Front and Rear Anti-Sway Bar Kit part number BCK001. This kit will fit the 2010-2012 Chevrolet Camaro Coupe with the FE2 or FE3 suspension. This kit will not fit the ZL1 models, as this model has a different suspension set up than the V6 and SS.
27mm Sway Bars for Front and Rear
Whiteline Sway bars BCF80Z and BCR22XXZ provide the front and rear sway bar for your vehicle. Both of these are 27mm heady duty solid steel sway bars, which are 3 point adjustable. The adjustable ends allow for easy adjusting of your vehicle's balance.
With the three different points you can stiffen up your suspension for use on the track, and soften it up for your ride home. Whiteline takes great care in matching these sway bars to your specific vehicle. Taking into account suspension design, vehicle weight and original component sizing, the designers of this kit have put together the best combination of bar sizes for your vehicle to maintain overall balance and increase your handling performance.
27mm Sway Bar Bushings and Brackets
Each sway bar will be mounted to your Camaro using a pair of Whiteline's synthetic elastomer sway bar bushings with new mounting brackets. Whiteline's patented formula bushings work to increase the bushing's grip on the sway bar for maximum handling performance. Whiteline's synthetic elastomer is resistant to chemicals, oils and weathering.
Front and Rear Lateral Locks
The Lateral Locks are mounted right next to the sway bar bushing mounts to prevent any shifting or sideways movements of the sway bar while cornering. These locks allow your sway bar to use all of its energy in the suspension instead of the being wasted by flopping left and right in the mounts. Also with your sway bar held firmly in place, it will not contact and potentially damage any other chassis components while cornering.
Front and Rear Heavy Duty Sway Bar Links
Whiteline part numbers KLC178 and KLC144 provide sway bar links for this vehicle. These links operate with a heavy duty steel ball joint end that rotates and adjusts to any angle needed. The steel ball joints are combined with lightweight aluminum bodies for increased strength over the factory mounts. These stronger sway bar links will help you eliminate sway bar preload during installation to allow your vehicle's suspension to perform how it is intended to perform. The adjustable links will also allow you to adjust for clearance issues if you have a lowered vehicle.
question_answer Customer Questions and Answers
- Question:
- Does Whiteline part number BCK001 come with all the hardware for installation?
- Answer:
- Yes, Whiteline part number BCK001 does come with all of the hardware for installation, the only part that you would have to reuse is the factory sway bar bolts.