| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. |
||||||
|
|
|
|
Please measure
the diameter of the sway bar before ordering.
|
|
|
|
|
|
$57.00 |
$20.00 |
|
$4.00 |
$17.00 |
$12.00 |
| Weight |
2.8# |
0.8# |
1.0# |
0.2# |
0.4# |
0.4# |
CAPRI
| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. | |||||||||
| YEAR | FRONT END CONTROL ARM BUSHING SET | REAR END CONTROL ARM
BUSHING SET Do not remove with an air chisel or press these bushings out of the control arms. They must be burned out. |
TRANSMISSION MOUNT |
SWAY BAR FRAME BUSHINGS-
PAIR
Please measure
the diameter of the sway bar before ordering.
|
TIE-ROD END BOOTS | FRONT SWAY BAR ENDLINK SET-PAIR | RACK AND PINION BUSHING SET, BEFORE 10-1-84 | RACK AND PINION BUSHING
SET, AFTER 10-1-84 | BALL JOINT DUST BOOT SET- PAIR |
| 79-86 | 4.3132 (14) With outer metal shells. $47.00 4.3108 (2)(15) $34.00 Must re-use existing outer shells
Do not remove with an air chisel or press these bushings out of the control arms. They must be burned out. |
4.3114 (2)(6) $86.00 4.3115 (2)(67) $98.00 Must re-use existing outer shells
|
4.1104 $31.00 1978-84 8 cyl., all transmissions 1980-84 6 cyl. all transmissions |
SEE SWAY BAR CHART BELOW |
|
9.8121 $18.00 |
|
| 9.13130 $4.00 |
| Weight |
3.6# / 2.4# |
4.9# / 5.3# |
0.2# |
1.5# |
0.4# |
0.4# | |||
| SWAY BAR DIAMETER Please measure
the diameter of the
sway bar before ordering. |
SET NUMBER $13.00 (pair) The sway bar sets do not include the metal brackets. |
GREASEABLE FRONT SWAY
BAR BUSHINGS, INCLUDES NEW BASE PLATE (MUST RE-USE OUTER BRACKET) $21.00 pair |
| 7/8" | 4.5113 | n/a |
| 15/16" | 4.5112 | n/a |
| 1" | 4.5111 | n/a |
| 1 - 1/6"/27 mm | 4.5110 | 4.5158 |
| 1 - 1/8"/ 28 mm | 4.5109 | 4.5159 |
| 30 mm | 4.5135 | 4.5160 |
| 1 - 1/4" | 4.5108 | 4.5161 |
| 1 - 5/16" | 4.5101 | 4.5162 |
| 1 - 3/8" | 4.5136 | 4.5153 |
| Weight |
0.5# |
1.8# |
COMET
| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. |
|||||
| YEAR | FRONT END CONTROL
ARM BUSHING SET Do not remove with an air chisel or press these bushings out of the control arms. They must be burned out. |
STRUT ROD BUSHING SET |
SWAY BAR FRAME BUSHINGS-
PAIR
Please measure
the diameter of the sway bar before ordering.
|
TIE-ROD END BOOTS | FRONT SWAY BAR ENDLINK SET-PAIR |
| 66-77 | 4.3102 (2)(18) $11.00 4.3106 (2)(19) $11.00 Must re-use existing outer shells
|
4.7112 $22.00 |
LINK TO SWAY BAR PAGE |
|
9.8120 $18.00 |
| Weight |
0.7# |
1.2# |
1.0# |
0.2# |
1.6# |
| 61-65 | 4.3101 (2) $10.00 Must re-use existing outer shells
|
4.7111 $20.00 |
LINK TO SWAY BAR PAGE |
|
9.8122 $18.00 |
| Weight |
0.4# |
0.8# |
1.0# |
0.2# |
1.1# |
COUGAR
| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. |
|||||||||
|
|
Do not remove with an air chisel or press these bushings out of the control arms. They must be burned out. Except 4.3132. |
Do not remove with an air chisel or press these bushings out of the control arms. They must be burned out. |
MOTOR MOUNTS - PAIRS ONLY |
|
Please measure
the diameter of the sway bar before ordering.
The sway bar sets do not include the metal brackets. |
Please measure
the diameter of the sway bar before ordering.
The sway bar sets do not include the metal brackets. |
PAIR |
|
|
|
1999-01
|
*
|
4.3154
$19.00 Must re-use existing outer shells
|
1999-00 4.1107 (113) $17.00 |
*
|
4.5175
$ 8.00 |
4.5176
$11.00 |
*
|
*
|
*
|
| Weight |
1.6# |
0.7# |
0.3# |
||||||
|
|
|
|
|
|
$13.00 |
$22.00 |
|
|
$4.00 |
| Weight |
0.6# |
0.9# |
0.2# |
||||||
|
|
$43.00 Must re-use existing outer shells
|
$86.00 4.3115 (2)(67) $98.00 Must re-use existing outer shells
|
|
|
|
|
$18.00 |
$12.00 |
$4.00 |
| Weight |
2.9# |
4.9# / 5.3# |
1.4# |
0.4# |
0.2# |
||||
|
|
$47.00 |
$86.00 4.3115 (2)(67) $98.00 Must re-use existing outer shells
|
motor mount set for 80-82 ONLY W/ 302 V/8 4.1122 $146.00 Pair motor mount & trans mount set for 80-82 ONLY W/ 302 V/8 4.1124 $173.00 Transmission mount only 4.1104 $31.00 |
|
|
|
$18.00 |
|
$4.00 Ball Joint Dust Boot Set 9.13130 $4.00 |
| Weight |
3.7# |
4.9# / 5.3# |
9.1# / 12.1# |
1.5# |
0.2# |
||||
|
|
$34.00 Must re-use existing outer shells
|
|
|
$22.00 |
|
|
$18.00 |
|
$4.00 |
| Weight |
1.7# |
1.0# |
1.0# |
1.3# |
0.2# |
||||
|
|
$11.00 4.3106 (2)(19) $11.00 |
|
N/A | 4.7112
|
|
|
9.8117
|
|
9.13101 $4.00 |
| Weight |
0.7# |
1.2# |
1.0# |
1.3# |
0.2# |
||||
| GRAND MARQUIS |
||||
| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. |
||||
| YEAR |
FRONT END CONTROL ARM
BUSHING SET Do not remove with an air chisel or press these bushings out of the control arms. They must be burned out. |
REAR END CONTROL ARM BUSHING
SET |
FRONT SWAY BAR FRAME BUSHINGS
- PAIR
Please measure
the diameter of the sway bar before ordering.
|
COMPLETE REAR SWAY BAR
BUSHINGS SET
Please measure
the diameter of the sway bar before ordering.
The sway bar sets do not include the metal brackets. |
| 1998-02 |
4.3162 $71.00 Uppers & lowers must use existing outer shells |
N/A |
9.5170 1-1/8" 9.5171 1-3/8" 9.5172 1-1/4" $21.00 |
N/A |
| 92-97 |
4.3153 Police, Taxi & tow package $77.00 must use existing outer shells. These sets include front coil spring isolators. |
4.3151 (2) $107.00 Must re-use existing outer shells |
9.5170 1-1/8" 9.5171 1-3/8" 9.5172 1-1/4" $21.00 |
4.5170 17 MM 4.5165 18 MM 4.5171 21MM $29.00 |
| Weight |
3.6# |
4.6# |
1.2# |
1.9# |
| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. |
|||||
| YEAR | FRONT END CONTROL ARM BUSHING SET | REAR END CONTROL ARM BUSHING SET | FRONT SWAY BAR BUSHING
SET
Please measure
the diameter of the sway bar before ordering.
|
FRONT SWAY BAR ENDLINK SET | TIE ROD END BOOTS
- PAIR |
| 83-88 |
|
Must re-use existing outer shells |
LINK TO SWAY BAR PAGE |
|
9.13101 $4.00 |
| Weight |
3.7# |
4.9# |
1.0# |
1.4# |
0.2# |
MONARCH
| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. |
|||||
| YEAR | FRONT END CONTROL
ARM BUSHING SET Do not remove with an air chisel or press these bushings out of the control arms. They must be burned out. |
STRUT ROD BUSHING SET | FRONT SWAY BAR BUSHING
SET- PAIR Please measure
the diameter of the sway bar before ordering.
|
FRONT SWAY BAR ENDLINK
- PAIR |
TIE ROD END BOOTS- PAIR |
| 80 |
$11.00 4.3106 (2)(19) Must re-use existing outer shells |
N/A | LINK TO SWAY BAR PAGE |
|
9.13101 $4.00 |
| Weight |
0.7# |
1.0# |
1.1# |
0.2# |
|
| 75-79 |
$11.00 4.3106 (2)(19) Must re-use existing outer shells |
4.7112 $22.00 |
LINK TO SWAY BAR PAGE |
|
9.13101 $4.00 |
| Weight |
0.7# |
1.2# |
1.0# |
1.1# |
0.2# |
| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. |
||||
| YEAR |
REAR CONTROL ARM
BUSHING SET Do not remove with an air chisel or press these bushings out of the control arms. They must be burned out. |
FRONT SWAY BAR FRAME BUSHING SET Please measure
the diameter of the sway bar before ordering.
|
REAR SWAY BAR BUSHINGS Please measure
the diameter of the sway bar before ordering.
|
MOTOR MOUNT INSERTS |
| 98-99 |
4.3154 (2) $19.00 Must re-use existing outer shells |
4.5175 20mm $8.00 The sway bar sets do not include the metal brackets. |
4.5176 18 mm $11.00 The sway bar sets do not include the metal brackets. |
4.1107 1 torque mount position only. Manual trans only $18.00 |
| Weight |
1.6# |
0.3# |
0.2# |
0.7# |
| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. |
|||||
| YEAR |
FRONT STRUT ROD BUSHING SET |
REAR STRUT ROD BUSHINGS SET |
FRONT SWAY BAR BUSHINGS Please measure
the diameter of the sway bar before ordering.
|
REAR SWAY BAR BUSHINGS Please measure
the diameter of the sway bar before ordering.
The sway bar sets do not include the metal brackets. |
TIE ROD END BOOTS PAIR |
| 86-95 |
4.7119 $25.00 |
4.7120 $25.00 |
LINK
TO SWAY BAR PAGE |
4.5131 20 mm 4.5134 1.00" 4.5132 1-1/16" 4.5133 1-1/8" $22.00 |
9.13101 $4.00 |
| Weight |
1.6# |
1.1# |
1.0# |
1.4# |
0.2# |
| How do we define
the word 'SET'. A 'SET' has enough bushings to do the left and right sides of vehicle. Control arm bushing sets will also include lower & upper positions, if required. |
||||||||
| YEAR |
FRONT CONTROL ARM BUSHING
SET Do not remove with an air chisel or press these bushings out of the control arms. They must be burned out. |
FRONT SWAY BAR FRAME BUSHING
SET
Please measure
the diameter of the sway bar before ordering.
The sway bar sets do not include the metal brackets. |
REAR SWAY BAR BUSHING
SET - INCLUDES END LINK GROMMETS
Please measure
the diameter of the sway bar before ordering.
The sway bar sets do not include the metal brackets. |
RACK & PINION BUSHING
SET |
REAR TRAILING ARM BUSHINGS |
MANUAL TRANS SHIFTER STABILIZER
BUSHING SET |
MOTOR MOUNT INSERTS |
TIE ROD END BOOTS - PAIR |
| 1997-01 |
4.3152 (2) $27.00 Must re-use existing outer shells |
4.5168 25 mm $8.00 |
4.5169 13 mm $25.00 |
4.10105 $9.00 |
4.7123 (57) $33.00 |
4.1106 $6.00 |
4.1105 $25.00 |
n/a |
| Weight |
1.8# |
0.3# |
1.3# |
0.5# |
1.0# |
0.3# |
0.8# |
|
| 1997-01 |
HYPER-FLEX MASTER SET
4-18117 $94.00 |
Includes: 4.3152, 4.5168, 4.5169, 4.7132, 4.10105 & 4.1106 |
9-13101 $4.00 |
|||||
| 1990-96 |
N/A |
4.5139 3/4" 4.5141 15/16" includes endlinks $26.00 |
4.5140 3/4" $26.00 |
n/a |
n/a |
n/a |
n/a |
9-13101 $4.00 |
| Weight |
0.9# |
1.1# |
0.2# |
|||||
PRODUCT WEIGHT
is now included in the charts above.
1.2# means that the part number listed weighs 1 pound & 2 tenths
of a pound.
We are giving this measurement, because this is how Energy Suspension
has chosen to give us the weight of each part number.
1 Pound(lb.or #) = 16 ounces(oz.) divided by 10 = 1.6 oz.
This is not the shipping weight, just the weight of the part.
To estimate your shipping cost, you should round up to the next pound
and usually add about a pound for shipping weight.
When we ship via UPS(United Parcel Service) we have to round up to the next pound.
UPS does not accept ounce weight, or increments of tenths.
We will always weigh your order on an electronic scale and charge
you for the exact weight, rounded up to the next pound.
For USPS(United States Postal Service) shipping we also round up to the next pound.
ABOUT THE COST OF SHIPPING VIA
| PACKAGE WEIGHT |
United Parcel Service UPS GROUND Modesto, CA. to Maine |
UPS 3 DAY AIR Modesto, CA. to Maine |
UPS 2 DAY AIR Modesto, CA. to Maine |
UPS 1 DAY AIR Modesto, CA. to Maine | United States Postal Service USPS PRIORITY MAIL DELIVERY TO ANY USA ADDRESSES ONLY. (2 - 4 DAYS) For over seas orders See the USPS website: http://ircalc.usps.gov/ to calculate the cost to ship your order to your country. |
United States Postal Service USPS FLAT RATE BOX SPECIFICATIONS AND INSURANCE INFORMATION |
| 1
POUND (1.0#) |
10.38 |
18.42 |
22.77 |
49.83 | $5.00 |
UNITED STATES POSTAL SERVICE (USPS) Required USPS boxes for flat rate service: ![]() Box #1 = 11-7/8 x 3-3/8 x 13-5/8 inches $9.25 Box #2 = 11 x 8-1/2 x 5-1/2 inches. $9.25 New even bigger Flat Rate Box now available Box #3 = 12" x 12" x 5-1/5" $13.25 Rates are for USA addresses only. Flat rate service is available for Canada and some other countries at an increased cost. See this website: http://ircalc.usps.gov/ for rates to your country. There is not a weight limit for USPS flat rate boxes, but there is a limit as to how much we can fit into USPS flat rate boxes. United Parcel Service(UPS) includes insurance. USPS does NOT include INSURANCE. If USPS loses your package and your order is not insured, you will have to place another order. We will not offer to pay for the lost part or for another shipment. If you want to add insurance to your USPS shipment, ask us for it. Here are the USPS insurance rates: $0.01 TO $50.00 value of your order $1.65 $50.01 TO $100.00 value of your order $2.05 $100.01 to $200.00 value of your order. $2.45 A note about USPS shipments. The USPS carrier usually picks up packages at out business first thing every morning Monday - Friday (we are not open Saturday or Sunday). This usually means that your order will not leave until the next day, so figure on 3-4 days for delivery. |
| 2
POUNDS (2.0#) |
11.25 |
20.60 |
25.69 |
54.87 | $7.75 |
|
| 3
POUNDS (3.0#) |
11.97 |
22.77 |
28.62 |
59.48 | $9.25 Flat rate. Must be able to fit into the box #1 or #2 USPS flat rate box. $13.25 Flat rate. Must be able to fit into the box #3 USPS flat rate box. |
|
| 4
POUNDS (4.0#) |
12.43 |
24.71 |
31.79 |
64.52 | $9.25 Flat rate. Must be able to fit into the box #1 or #2 USPS flat rate box. $13.25 Flat rate. Must be able to fit into the box #3 USPS flat rate box. |
|
| 5
POUNDS (5.0#) |
12.90 |
26.57 |
35.41 |
69.12 | $9.25 Flat rate. Must be able to fit into the box #1 or #2 USPS flat rate box. $13.25 Flat rate. Must be able to fit into the box #3 USPS flat rate box. |
|
| 6
POUNDS (6.0#) |
13.18 |
28.75 |
38.20 |
74.16 | $9.25 Flat rate. Must be able to fit into the box #1 or #2 USPS flat rate box. $13.25 Flat rate. Must be able to fit into the box #3 USPS flat rate box. |
|