moog-k201613 | 21.17mm Front Sway Bar Bushings | 06-08 Cobalt 07-10 G5

  • moog-k201613 360image 1
  • moog-k201613 Front Sway Bar Bushings - 20.82 mm (0.82 Inch)
  • moog-k201613 Front Sway Bar Bushings - 20.82 mm (0.82 Inch)
  • moog-k201613 Front Sway Bar Bushings - 20.82 mm (0.82 Inch)
  • moog-k201613 Front Sway Bar Bushings - 20.82 mm (0.82 Inch)
  • moog-k201613 Front Sway Bar Bushings - 20.82 mm (0.82 Inch)
  • moog-k201613 360image large 1

Front Sway Bar Bushings - 20.82 mm (0.82 Inch)

Manufacturer: MOOG
Part Number: moog-k201613
Price: $26.52

check_box In Stock check_box Ships Immediately


Suggested part for moog-k201613: dll120
dll120 Front Sway Bar Lateral Locks - 19-20mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Sway Bar Bushings - 20.82 mm (0.82 Inch) moog-k201613 fits these vehicles:

moog-k201613 | 21.17mm Front Sway Bar Bushings | 06-08 Cobalt 07-10 G5

21.17mm Front Sway Bar Bushings with Synthetic Fabric Lining 07-10 Pontiac G5 | 06-08 Chevy Cobalt

These 21.17mm (0.83in) Front Sway Bar Bushings fit the 2006 Pontiac Pursuit or the 03-07 Saturn Ion and provides a better replacement option than the originals. The synthetic lined inner diameter of these front sway bar bushings will last longer than the original equipment (OE) sway bar bushings and eliminates the rubber-on-metal squeaking that comes with age and wear, provides a stable grip on your sway bar, and improves handling in a turn.

front sway bar bushings 07-10 pontiac g5
synthetic fabric lined front sway bar bushings for g5 and cobalt

Sway Bar Bushing Replacements

The front sway bar connects the wheels on the driver and passenger sides of your Pontiac or Chevy and helps keep them on the pavement during a quick turn. When the OE sway bar bushings wear down this can allow excessive movement in the bar and your car can roll to the outside during a turn. The rubber OE bushings that came installed on your Pontiac or Chevy has a short lifespan compared to the rest of your car, especially if you enjoy powering through the corners of backroads like those in Erath County, TX.

When the front sway bar bushings wear down, your sway bar can move around in the excess space of the hollowed out bushings, increasing body roll and costing you traction during a sharp, quick turn. If you're already experiencing some traction loss in a turn, or you want to preemptively fix that problem, then Moog has a great solution with their 21.17mm front sway bar bushings with synthetic fabric lining.

Restore Turning Traction

The new PTFE synthetic fabric lining creates a tough barrier between the sway bar and the sway bar bushings, reducing the wear that the bar inflicts on the bushing. This allows these front sway bar bushings to last 3 times longer than the OE bushings, meaning fewer replacements. More durability means these bushings hold the sway bar securely for a longer amount of time, giving you better-turning performance and less body roll.

These synthetic fabric lined sway bar bushings can be easily installed from the comfort of your garage or driveway using nothing more than a simple socket set to unbolt the bracket. The split design allows the bushing to slip over the sway bar without the hassle of detaching the bar and sliding the bushing all the way down the bar like many OE replacements would require. This is one of the simplest DIY suspension upgrades you can put on your car.

front sway bar bushings 06-08 chevy cobalt