moog-k201614 | 17.3mm Front Sway Bar Bushings | 05-10 Cobalt 03-07 Ion

  • moog-k201614 360image 1
  • moog-k201614 Front Sway Bar Bushings -16.76 mm (0.66 Inch)
  • moog-k201614 Front Sway Bar Bushings -16.76 mm (0.66 Inch)
  • moog-k201614 Front Sway Bar Bushings -16.76 mm (0.66 Inch)
  • moog-k201614 Front Sway Bar Bushings -16.76 mm (0.66 Inch)
  • moog-k201614 Front Sway Bar Bushings -16.76 mm (0.66 Inch)
  • moog-k201614 360image large 1

Front Sway Bar Bushings -16.76 mm (0.66 Inch)

Manufacturer: MOOG
Part Number: moog-k201614
Price: $19.70

check_box In Stock check_box Ships Immediately


Suggested part for moog-k201614: dll116
dll116 Front Sway Bar Lateral Locks - 15-16mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Sway Bar Bushings -16.76 mm (0.66 Inch) moog-k201614 fits these vehicles:

moog-k201614 | 17.3mm Front Sway Bar Bushings | 05-10 Cobalt 03-07 Ion

17.3mm Sway Bar Bushings with Synthetic Fabric Lining 2005-2010 Chevy Cobalt | 2007-2010 Pontiac G5

These 17.3mm (0.68in) Front Sway Bar Bushings fit the 05-06 Pontiac Pursuit or the 03-07 Saturn Ion and provides a better option than other original equipment (OE) replacements. Because the inner diameter of these bushings have a new synthetic fabric liner they will last longer than the OE sway bar bushings and eliminate rubber-on-metal squeaking that develops when the original bushings age and wear down. These front sway bar bushings will provide a stable grip on your sway bar and improve handling in a turn.

05-10 chevy cobalt front sway bar bushings
worn inner diameter oe sway bar bushing

Worn OE Sway Bar Bushings

If you've noticed a lot of squeaking when you turn or an excessive amount of body roll from your Pontiac or Chevy then you probably have worn sway bar bushings. The inner diameter of your OE front sway bar bushings will eventually wear down meaning the sway bar is loose and this can cause "body roll" in your car and possibly make you lose traction during a turn. This can affect your tire wear and the handling of your car while taking a sharp corner. Those worn bushings can also become squeaky as they age, making you cringe with the noise at every bump and turn.

Longer Lasting Lined Sway Bar Bushings

The OE front sway bar bushings on your Cobalt, G5, Pursuit, or Ion are made of rubber which is great for absorbing shocks from the road but they can wear down relatively quickly. You will almost certainly need to replace the sway bar bushings during the life of your vehicle, especially if you sometimes drive on backroads in Hood County or make lots of turns while cruising around Downtown Dallas. The Problem Solvers at Moog have come up with a solution to this durability problem with their Synthetic Lined Front Sway Bar Bushings for Chevy, Pontiac, and Saturn cars.

17mm synthetic fabric lined front sway bar bushings
07-10 pontiac g5 front sway bar bushings

Replace or Upgrade?

The new PTFE synthetic fabric lining creates a tough barrier between the sway bar and the sway bar bushings, reducing the wear that the friction of turning causes. Moog's synthetic fabric lined bushings have been shown to last 3 times longer than other OE replacements, eliminate squeaking, and restore the ride to a like new feeling. Thanks to that lining, a rougher commute won't wear down your sway bar bushings nearly as fast, which comes in handy if you sometimes travel farm roads like those around Suspension.com headquarters.

These bushings are also easily installed due to the split design, making this the easiest DIY suspension upgrade or replacement you can take on. All you need is a simple socket set to unbolt the bracket, remove the old bushing, slip the new bushing over the bar, and reinstall the bracket. This job is easily accomplished in your garage or driveway, no trip to the shop required. Also, Suspension.com will handle any warranty issues in house, so our teams will deal with any problems that come up so you don't have to.