10.3102 | MG MGB | Front Control Arm Bushing Replacement Kit

  • 10.3102 360image 1
  • 10.3102 Front Control Arm Bushing Set
  • 10.3102 Front Control Arm Bushing Set
  • 10.3102 Front Control Arm Bushing Set
  • 10.3102 Front Control Arm Bushing Set
  • 10.3102 Front Control Arm Bushing Set
  • 10.3102 360image large 1

Front Control Arm Bushing Set

Manufacturer: Energy Suspension
Part Number: 10.3102

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $42.91

check_box In Stock check_box Ships Immediately


  • 4 - 8124 - Control Arm Bushings
  • 8 - 7086 - Track Bar Bushings
  • 1 - 9.11101 - 1/2OZ Formula 5 Grease Packet
Suggested part for 10.3102: 10.2101
10.2101 Rear Leaf Spring Bushing Set
After installing the front control arm bushings you'll want to realign the vehicle. In order to make the most of that alignment, you'd want to make sure the rear end is tracking correctly. Replacing the rear leaf spring bushings will help accomplish that.

  • Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 10.3102 to 2645045
Prothane 2645045
Polyurethane.
Price: $6.92
Warranty: Lifetime Warranty

question_answer Ask us a Question

FitmentFront Control Arm Bushing Set 10.3102 fits these vehicles:
Details
Polyurethane Front Control Arm Bushings
On the front of vehicles, they make a dramatic improvement in the way they handle with quicker steering response and greater vehicle control.

10.3102 | MG MGB | Front Control Arm Bushing Replacement Kit

Polyurethane Front Control Arm Bushings
  • Maintains proper alignment under extreme conditions on and off road and during competition.
  • Improves vehicle handling, cornering and overall control
  • Full floating, for smoother operation.
  • Made of Energy's HYPER FLEX performance polyurethane to add performance and durability
Footnotes
  • One Set Will Cover the Left and Right Side

HyperFlex Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.

Energy Suspension Control Arm Bushing
Energy Suspension Control Arm Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Be sure to use Formula 5

A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif
Energy Suspension 10.3102

Product Reviews for 10.3102 | MG MGB | Front Control Arm Bushing Replacement Kit

5 Star (8)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 10.3102

5 out of 5 based on 8 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Quality products "

I did all of the bushings throughout my 71 MGB, front and rear and I do have to say I like the results. This car is my Autocross and street car, and I can tell a marked difference in handling but I do have to say for a long distance car, I would use the factory rubber bushings. A lot of road noise is transmitted to the cabin with these bushings that on a long distance drive can be a little annoying. That being said, this thing corners like its on rails!

verified_user Verified Buyer - - . Energy Suspension 10.3102 - 5 out of 5
M
verified_user

starstarstarstarstar" Good "

Ive been using this product for years and its the best thing you can do for an MGB suspension.

verified_user Verified Buyer - - . Energy Suspension 10.3102 - 5 out of 5
J
verified_user

starstarstarstarstar" Quality products "

I did all of the bushings throughout my 71 MGB, front and rear and I do have to say I like the results. This car is my Autocross and street car, and I can tell a marked difference in handling but I do have to say for a long distance car, I would use the factory rubber bushings. A lot of road noise is transmitted to the cabin with these bushings that on a long distance drive can be a little annoying. That being said, this thing corners like its on rails!

verified_user Verified Buyer - - . Energy Suspension 10.3102 - 5 out of 5
J
verified_user

starstarstarstarstar" Great Parts! "

This product is well designed and easy to install. These totally transformed the cars handling over the originals.

verified_user Verified Buyer - - . Energy Suspension 10.3102 - 5 out of 5

compare_arrows Compare with Similar Parts


This Part
10.3102 compare
$42.91
Prothane
Prothane compare
$6.92
($35.99) cheaper

question_answer Customer Questions and Answers


Question:
Does kit 10.3102 come with sleeves?
Answer:
No, kit 10.3102 does not come with sleeves. You will need to reuse your original hardware.