Rear Sway Bar Endlinks - MGB

In The Box of 10.8102

2 - 8126 - Rear End Link Bushings
2 - 15.10.27.39 - .625OD X .437ID X 2.250L Center Sleeve
1 - 9.11103 - 6 Gram Formula 5 Prelube Packet

9.11110 Formula 5 Prelube 3 - 5 mL Tubes
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

9.11104 Formula 5 Prelube - 8oz. Tub Polyurethane Bushing Grease
8 ounce tub of High Performance Grease by Energy

Warranty Information

Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

Ask us a Question

FitmentRear Sway Bar End Links 10.8102 fits these vehicles:

MGB 1977 thru 1980

Details

Polyurethane Rear Sway Bar End Link Bushings

Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

Rear Sway Bar Endlinks - MGB - 10.8102

Polyurethane Rear Sway Bar End Link Bushings

Your vehicle's sway bar system will work at its maximum efficiency!
Replaces that original, short lived and too soft rubber.
Easy to install with basic tools.
Made of rugged Energy's HYPER FLEX performance polyurethane material for lasting durability.

Footnotes

One Set Will Cover the Left and Right Side

Energy Suspension Sway Bar Endlinks

While your sway bar is intended to maximize contact to the road, it can't accomplish this task on its own. Sway bar endlinks are just as important as the sway bar itself. Connecting your sway bar to the rest of the suspension, these endlinks allow the sway bar to perform its task. Should your endlinks wear down or fail completely, you will inevitably feel increased body roll while cornering.

Coverage and Performance

OE replacements will undoubtedly come with rubber bushings. While rubber can easily absorb vibrations from the road, it doesn't hold up for long. Crafted using Hyperflex polyurethane bushings and including a brand new set of hardware, Energy Suspension's endlinks are a significant upgrade over OE replacements. The Hyperflex polyurethane bushings are resistant to both chemicals and physical wear, increasing the endlink's durability and performance exponentially. Plus, Energy Suspension covers all of their endlinks with a two-year warranty handled in-house here at DST.

Product Reviews for Rear Sway Bar Endlinks - MGB - 10.8102

5 Star (1)

: 100%

4 Star (0)

: 0%

3 Star (0)

: 0%

2 Star (0)

: 0%

1 Star (0)

: 0%

5 out of 5 based on 1 user reviews. Write a Review

" Superior bushing with very quick shipping "

The bushing design lends itself to easy installation compared to the original, though it did not come with instructions , the bushings were easy to install using a vice to press them in place with the supplied grease. The price was quite reasonable, slightly less than some of the Original Equipment designs offered. Only time will tell if these are longer lasting than the original design, they certainly look and feel superior. Excellent company and product, Thanks.

Verified Buyer - Ronald Jones - December 17, 2011. Energy Suspension 10.8102 - 5 out of 5

Fitment for 10.8102

Rear Sway Bar Endlinks - MGB - 10.8102