• 11.3106 Rear Control Arm Bushing Set
  • 11.3106 Rear Control Arm Bushing Set

Rear Control Arm Bushing Set

Manufacturer: Energy Suspension
Part Number: 11.3106
Rating 219 Reviews


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $131.09

Free Shipping! In Stock Ships Immediately

Polyurethane Rear Control Arm Bushings
On the rear of vehicles, they make a dramatic improvement in the way they handle with quicker steering response and greater vehicle control.

Rear Control Arm Bushing Kit | Mazda Miata 1990-1997

Polyurethane Rear Control Arm Bushings
  • Maintains proper alignment under extreme conditions on and off road and during competition.
  • Improves vehicle handling, cornering and overall control
  • Full floating, for smoother operation.
  • Made of Energy's HYPERFLEX performance polyurethane to add performance and durability
  • One Set Will Cover the Left and Right Side
FitmentRear Control Arm Bushing Set 11.3106 fits these vehicles:
  • 8 - 2694 Upper Control Arm Bushings
  • 4 - 2695 Lower outside position / inside
  • 8 - 2696 Lower inside position
  • 4 - 2697 Hub to upper control arm
  • 4 - 2699 Lower outer position / outside
  • 4 - 15.10.541.39 (.875? x .562? x 2.270?) RLCA Outer
  • 4 - 15.10.549.39 (.875? x .500? x 2.750?) RLCA Inner
  • 4 - 15.10.576.39 (.875? x .500? x 2.250?) RUCA
  • 2 - 15.10.577.39 (.750? x .406? x 2.250?) Hub
  • 2 - Washer (2.000? x .500? x .120?)
  • 2 - Washer (2.000? x .562? x .120?)
  • 1 - 17492 Instruction sheet
  • Suggested part for 11.3106: 11.310511.3105 Front Control Arm Bushing Set
    Replace the front control arm bushings at the same time for the maximum benefit to your vehicle's handling.

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
  • Cross Reference from 11.3106 to 12301Prothane 12301
    Price: $172.77
    Warranty: Lifetime Warranty

Energy Suspension designed the sleeves to match your OE bolt size, allowing you to re-use the bolts to save you even more money!

Energy Suspension 11.3106


Troubling Turns

Do you feel like your Mazda Miata isn't taking those corners like it used too? Maybe you've heard some clunking or you've been having problems with your Miata's alignment? All of these and more could be symptoms of a failed OE control arm bushing. The OE rear control arm bushings installed on your Miata are made of a soft rubber so that they absorb most of the vibrations you pick up from the road. The drawback to this softness is that the bushings are prone to stretching, cracking, and eventually rotting away. Luckily for you, DST has what you need!


Dependable and Durable!

Say hello to Energy Suspension's 11.3106, a HyperFlex polyurethane set of rear control arm bushings designed specifically for the Mazda Miata 1990-2005. Offering increased responsiveness and a better feel for the road the 11.3106 not only gets rid of your clunking and loose steering, but it's also designed to hold up under stress for much longer than the OE. Since the 11.3106 is crafted using Energy Suspension's Hyperflex polyurethane your NVH might increase slightly, but the dramatic increase of durability and longevity are well worth it. In fact, if you plan on racing the NVH can even be helpful, giving you an even clearer feel for what your roadster can handle.


Easy to Install!

The 11.3106 was also designed with ease of installation in mind. Energy Suspension eliminated the need for a press by forming these bushings as two half-bushings with a metal sleeve. Just insert each half bushing on each side of the control arm, then slip the sleeve through and, using your OE bolts, finish the install. Energy Suspension designed the sleeves to match your OE bolt size, allowing you to re-use the bolts to save you even more money! If you also need to replace your front control arm bushings check out Energy Suspension's 11.3105! Both the 11.3105 and 11.3106 kits are stocked regularly in our Stephenville warehouse, ready to ship the day you order them!

Energy Suspension 11.3106

Product Reviews for Rear Control Arm Bushings 11.3106

Energy Suspension 11.3106

5 out of 5 based on 219 user reviews. Write a Review

Worst part of the job is getting the control arms off and the old bushings out. This is a great upgrade for precise handling.
5 out of 5 - Great!
Eric Hahn - . Energy Suspension 11.3106

Product Reviews for Energy Suspension Rear Control Arm Bushings

Did their job! I had what I think was called wheel hop.. the rear end seem to bounce or wiggle when driving. Research online suggested these parts and after ordering the wrong parts from Autozone Online I found this suspension.com and they sent the Right Parts that did the trick!
5 out of 5 - Great Value
Orlando Braxton - . Energy Suspension 11.3104
They were straight forward to install and made a noticeable improvement over the stock rubber bushings would use these again if needed.
5 out of 5 - great part
Dylan Van Horn - . Energy Suspension 3.3132
Over all, nominal. Installation was as expected. Would be nice if Energy would offer to include the metal pieces for the C5. These cars are getting quite old now and are starting to wear these items. When replacing the bushings, just would be nice to have the option of ordering them from one source.
3 out of 5 - OK product. Only if you do not need any of the supporting metal bits.
Steve Smith - . Energy Suspension 3.3177
The bushings seem to be holding up well for a cruiser!
5 out of 5 - Review 2 Years Later
Pete Moncada - . Energy Suspension 3.3123
There is no how to videos for track bar installation, directions arent very descriptive. Editors note: The instructions would have been better if they were actual pictures of the suspension parts. Energy is working on making their instructions better. \n
5 out of 5 - Quality materials
Pete - . Energy Suspension 3.3194
My mechanic could get the factory bushings out without destroying the outer shell. Since the set does not include the outer shells, the set is useless for me. What not provide the outer shell? Editors Note: The outer shell is very hard to make. In some cases the shell will different dimensions in 1-3 different sizes so it will press into the component and stay.
1 out of 5 - Decent but why reuse existing outer shells?
Jeff Reynoldson - . Energy Suspension 3.3152
Perfect fit and well made.
5 out of 5 - Excellent
Bobby Tompkins - . Energy Suspension 8.3133
Very pleased with product.
5 out of 5 - Parts worked perfect
Michael Follmer - . Energy Suspension 16.3112
I purchased the red polys for my Z. Installation was challenging because of the nature of the Z itself, and not because of the product. They fit very snugly and are still pliant and beefy two years later. I am hard on the suspension components when I drive, as I believe less than 1G in the corners is for sissies ;-) The suspension is still just as tight as it was the day I installed them. I am very pleased and impressed with this brand and will purchase them again once they wear out
5 out of 5 - Review 2 Years Later
Kate Somerville - . Energy Suspension 7.3105
Pretty good so far.
5 out of 5 - Review 2 Years Later
Dain Burgess - . Energy Suspension 7.3119

Compare with Similar Parts

This Part


  • 219
  • This part
  • Bushing Material: Polyurethane

This Part


$172.77($41.68) more expensive

  • Bushing Material: Polyurethane

View Part