unarchive In The Box of 11.5101 keyboard_arrow_down
- 2 - 5031 - 23mm Sway Bar Bushings
- 1 - 9.11103 - 6 Gram Tube of Formula 5 Prelube
add_shopping_cart Suggested Parts 3keyboard_arrow_down
If your front sway bar bushings are worn out, chances are that your rear bushings are worn out as well. Replace them both at the same time while you're already under the car for the maximum increase in handling.
DST Silver Color - Limited Lifetime Warranty
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for Front Sway Bar Bushings - 23 mm | Mazda RX7 | 11.5101
- 5 Star (4)
- 4 Star (0)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
Energy Suspension 11.5101
starstarstarstarstar" Review 1 Year Later "
perfectverified_user Verified Buyer - Kenneth Snow - . Energy Suspension 11.5101 - 5 out of 5
starstarstarstarstar" Good "
Worked great and it fit well.verified_user Verified Buyer - George Robertson - . Energy Suspension 11.5101 - 5 out of 5
starstarstarstarstar" Excellent product! "
I was against using after market suspension parts, I always had used the original. My mechanic recommended me this product. I am so pleased I decided to go for it! My 1983 RX-7 suspension improvement is amazing. These parts made the suspension feel more stable and fun to drive. Go for it, you will not regret it.verified_user Verified Buyer - JUAN TORRES - . Energy Suspension 11.5101 - 5 out of 5
starstarstarstarstar" quality item "
i ordered to replace some bushings that i could not find any where else. these didnt fit just right, so i modified them a bit and now they are excellent!verified_user Verified Buyer - ron jones - . Energy Suspension 11.5101 - 5 out of 5