13.3101 | Front Control Arm Bushing Kit - 30mm shell od | Ferrari

  • 13.3101 360image 1
  • 13.3101 Ferrari Front or Rear Control Arm Bushing - 30mm Shell O.D.
  • 13.3101 Ferrari Front or Rear Control Arm Bushing - 30mm Shell O.D.
  • 13.3101 Ferrari Front or Rear Control Arm Bushing - 30mm Shell O.D.
  • 13.3101 Ferrari Front or Rear Control Arm Bushing - 30mm Shell O.D.
  • 13.3101 Ferrari Front or Rear Control Arm Bushing - 30mm Shell O.D.
  • 13.3101 360image large 1

Ferrari Front or Rear Control Arm Bushing - 30mm Shell O.D.

Manufacturer: Energy Suspension
Part Number: 13.3101
Rating starstarstarstarstar1 Reviews | 6 Customer Questions
:(?)
Black
Red
:(?)
Free Lifetime Warranty Upgrade
Price: $30.00

check_box In Stock check_box Ships Immediately

  • 1 - 3111 - Control Arm Bushing, 30mm
  • 1 - 9.11108 - Formula 5 Pre-Lube
Suggested part for 13.3101: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
Suggested part for 13.3101: 9.11104
9.11104 Formula 5 Prelube - 8oz. Tub Polyurethane Bushing Grease
8 ounce tub of High Performance Grease by Energy
  • Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

question_answer Ask us a Question

FitmentFerrari Front or Rear Control Arm Bushing - 30mm Shell O.D. 13.3101 fits these vehicles:
Details
Polyurethane Front Control Arm Bushings
On the front of vehicles, they make a dramatic improvement in the way they handle with quicker steering response and greater vehicle control.

13.3101 | Front Control Arm Bushing Kit - 30mm shell od | Ferrari

Fits many different models.
Shell O.D. Measurement: 30mm
Replaces OEM. Part #:111616
Sold as single bushing in each kit purchased
Polyurethane Front Control Arm Bushings
  • Maintains proper alignment under extreme conditions on and off road and during competition.
  • Improves vehicle handling, cornering and overall control
  • Full floating, for smoother operation.
  • Made of Energy's HYPER FLEX performance polyurethane to add performance and durability

HyperFlex Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.

Energy Suspension Control Arm Bushing
Energy Suspension Control Arm Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Be sure to use Formula 5

A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif
Energy Suspension 13.3101

Product Reviews for 13.3101 | Front Control Arm Bushing Kit - 30mm shell od | Ferrari

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 13.3101

5 out of 5 based on 1 user reviews. Write a Review
R
verified_user

starstarstarstarstar" BUON PRODOTTO "

GOOD PRODUCT FOR FERRARI 360 AND 430. LITTLE MODIFY FOR PLACE BUT ALL IS OK. SUPER FAST SHIP TO ITALY, ONLY 4 DAYS AND SUPER PRICE

verified_user Verified Buyer - - . Energy Suspension 13.3101 - 5 out of 5

question_answer Customer Questions and Answers

Question:
What are the specs on part 13.3101?
Answer:
Specs are: OD =.9 in ID= .6 in Length = 1.8 in ID of Sleeve =.346 in
Question:
What is the difference between red and black bushings on part number 13.3101? Also, how do I know if I need the 30mm?
Answer:
There is no difference between red and black other than the color. As for the 30mm or not for the 13.3101, you will need to measure your bushings that you have now already installed to check the size.
Question:
The kit 133101 contains how many bushings?
Answer:
Energy kit 13.3101 contains one single bushing.
Question:
Will part number 13.3101 fit my 1986 Ferrari Mondial 3.2 Cabriolet?
Answer:
You will need to check your rear control arm bushing outer diameter first to make sure it is 30mm. Also, part number 13.3101 replaces the oem part number 111616.
Question:
Dear ENS team, what is overall lenght of this bushing? This is to install on a 78 De Tomaso Longchamp front A arms. I am 99% sure it fits, just nee to check the lenght. Thks. Pascal
Answer:
The dimensions on bushing 13.3101 are: Specs are: OD =.9 in ID= .6 in Length = 1.8 in ID of Sleeve =.346 in
Question:
I think you had a set of this bushing without outer shell. It is cheaper to buy and lighter for shipping. Now do I have to buy with the outer shell? If so, is it easy to disassemble(just push out) or should I press out?
Answer:
It would be easier install to get the one with the shell and press out the old and press in the new
add Ask a Question