• 15.1107 Motor Mount Insert - 2.0L
  • 15.1107 Motor Mount Insert - 2.0L
  • 15.1107 Motor Mount Insert - 2.0L
  • 15.1107 Motor Mount Insert - 2.0L

Motor Mount Insert - 2.0L

Manufacturer: Energy Suspension
Part Number: 15.1107
Rating 312 Reviews

Options


Black
Red
Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Quantity:
Price: $21.36

In Stock Ships Immediately


Details

Motor Mount Insert | 09-11 Volkswagen Jetta | Energy

Fits 2.0L for Audi and Volkswagen models listed except for 2010 Volkswagen Beetle.
  • Fits 2.5L for the 2010 Volkswagen Beetle
FitmentMotor Mount Insert - 2.0L 15.1107 fits these vehicles:
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

Energy Suspension Motor Mount Inserts

Energy Suspension's motor mount inserts are crafted out of Hyperflex polyurethane, a material much more durable than rubber that can handle intense weight, heat, and pressure. Designed to fill the voids built into your OE motor mounts, these inserts will drastically increase the power transfer efficiency from your engine to the wheels. Since the voids were initially put there to reduce NVH, it stands to reason that filling in those voids will have the opposite effect. Installing Energy Suspension's Hyperflex motor mount inserts may increase your NVH, but the increase to overall performance is worth it to some drivers. To top it off, all of energy's motor mount inserts are covered by a two-year warranty handled in-house here at DST.

energy box

OE Motor Mount

The OE Motor Mount

OE motor mounts are usually made out of metal with holes strategically placed to keep most of the engine's vibrations from traveling to the cab. While the OE mounts are decent for the daily driver, the weekend warrior or straight up racer will probably look for an upgrade. Purchasing entire motor mounts can be rather pricey, but what other choice to these drivers have? Energy Suspension's Hyperflex Polyurethane motor mount inserts offer the performance boost of a solid motor mount without the higher cost.

Energy Suspension 15.1107

Product Reviews for Motor Mount Inserts 15.1107

Energy Suspension 15.1107



5 out of 5 based on 312 user reviews. Write a Review

Installed this mount on a 2011 VW GTI, Fit was excellent. This mount got rid of all engine movement. The shifter falls into gear now. Very little noise vibration harshness. A low hum at idle and just a little vibration when backing out of the driveway. Kind of a pain to install. Loosen bolt a few turns and grease mount to be installed. Start mount by hand then use car jack and wood block to push mount until bolt head is reached. Remove bolt and jack the mount the rest of the way in. Install small washer, big washer, then bolt.
5 out of 5 - Perfect fit, no more engine slop.
Mark Geiger - . Energy Suspension 15.1107
Got rid of most, if not all, wheel hop on A/S tires. A little more NVH as others have said. It is most noticeable on reverse with a DSG trans. It can cause a little more of a helicopter booming noise at idle in certain cold conditions. Double sided tape to backside of the rear license plate fixed most of the noise on reverse.
4 out of 5 - Review 1 Year Later
Jake - . Energy Suspension 15.1107
The install was very straightforward and simple. Overall I am pleased with the product. Vibrations are minimal.I would buy this product again.
4 out of 5 - Easy install with one problem
Christopher Barnes - . Energy Suspension 15.1107
Installed this mount on a 2011 VW GTI, Fit was excellent. This mount got rid of all engine movement. The shifter falls into gear now. Very little noise vibration harshness. A low hum at idle and just a little vibration when backing out of the driveway. Kind of a pain to install. Loosen bolt a few turns and grease mount to be installed. Start mount by hand then use car jack and wood block to push mount until bolt head is reached. Remove bolt and jack the mount the rest of the way in. Install small washer, big washer, then bolt.
5 out of 5 - Perfect fit, no more engine slop.
Mark Geiger - . Energy Suspension 15.1107
I got the black version for my MKVI GTI because of the graphite in it. The installation was very easy, it just slides into the mount without much force needed. Noise vibration harshness has increased a bit, but that is to be expected, and wheel hop has been reduced. I'm happy with the results, and the price is hard to beat.
5 out of 5 - Good results and very easy to install
Eduardo Tibau - . Energy Suspension 15.1107
The stock torque mount on the GTI is a little soft, allowing excess movement of the engine on acceleration and deceleration. This insert takes up the majority of the slop and also helps to make shifting smoother and more consistent. The only complaint I have is that the vibrations in reverse are rather noticeable, other than that I totally approve of this product.
4 out of 5 - Excellent way to remove the slop in the factory engine mount.
Zachary Repp - . Energy Suspension 15.1107

Product Reviews for Energy Suspension Motor Mount Inserts

Mounts were overall easy to install. I love em, i can definitely tell a difference from before were the motor would slap back sometimes when i accelerate. But after installing these inserts I get direct power to the wheels!
5 out of 5 - Awsome, motor mounts have no more play
Reny Ros - . Energy Suspension 16.1111
Motor mount inserts were easy to put in if your current engine mounts arent warped. No tips no problems car feels more solid.
5 out of 5 - Review 2 Years Later
Grant Koebke - . Energy Suspension 7.1106
I installed these on my 2000 VW Beetle that has been lifted and is running 215/70-15 tires. The car had 160000 miles (now 187000) and as with most high mileage vehicles the underside of the engine and trans stay a little wet with oil. These mounts are directly underneath the engine and trans. The stock units swollen and doing a poor job of maintaining torque loads. The larger tires increase the daily torque loads and split the swollen OE mounts. The install was easy and straight forward. there was a noticeable improvement in feel and stability. After 27000 miles in the lifted configuration the parts are performing great.\nEditors Notes: Poly urethane is more resistant to oil than rubber but over time the oil cause the poly bushing to fail.
5 out of 5 - Review 2 Years Later
Trey McFarland - . Energy Suspension 15.1105
Love them,, no added vibration,, no more wheel hop! Much more positive feeling when launching,,, Ive been dealing with this problem for years and have tried filling the gaps in the rubber with silicone, and hot glue,, but nothing is work this well,,, if left stock rubber the torque strut only last for about 1 year,, I have replaced rubber with Poly and several other places on my car with the same results
5 out of 5 - Fantastic,, modified the two zip ties with four 75 lb zip ties and made 2 round retaining rings to keep the two halves together,, came packaged with 2 sketchy zip ties with squares that need to be trimmed and seem to bogus
Terry Bamber - . Energy Suspension 5.1105
5-star rating for these mounts, they are still holding up after 2 years.
5 out of 5 - Review 2 Years Later
Gonzalo Luevanos - . Energy Suspension 3.1145
Bought these in red for a zetec swap into my 98 escort wagon. Fast shipping and a great solid feel! Well worth the buy for some almost solid mounts. Ill be back for the poly suspension kit for sure! Thanks guys!
5 out of 5 - Awesome inserts! Very worth it!
Brian Santine - . Energy Suspension 4.1105
I am sorry to say that I have not installed this part yet. You know the story, life sometimes gets in the way. I did however install these into the steel clam shell of my old mount but they are not installed in the car. They do appear to be a nice improvement.
5 out of 5 - Review 2 Years Later
Paul Hadorn - . Energy Suspension 3.1116
I have a 96 GMC pickup and I started with the suspension Package and just got some new motor mounts. I installed the right side and just now moved the front Diff.out of the way so I can get the left side mounted. \nYour products are easy to install and the instructions easy to follow even for a 75 year old. Between VA appointments Im getting it done and will let you know how it all works out. I know that I will enjoy it.
5 out of 5 - Sure like everything that I have purchased for my truck.
Ron Binnie - . Energy Suspension 3.1121
Sorry for my english \nFriendly Richard
5 out of 5 - Hi Brit , yes the parts are install, and all is good .This part is perfect
Richard AMARA - . Energy Suspension 3.1116
Still work very well, no complaints.
5 out of 5 - Review 1 Year Later
Richard Suarez - . Energy Suspension 7.1112