unarchive In The Box of 16.3102 keyboard_arrow_down
- 2 - 3215 - Lower Control Arm Bushings
- 2 - 3216 - Lower Control Arm Thrust Washers
- 2 - 7066 - Track Bar Bushings
- 2 - 7065 - Track Bar Bushings
- 2 - 15.10.225.39 - .875OD X .480ID X 2.230L Center Sleeves
- 1 - 9.11102 - 10 Gram Tube of Formula 5 Prelube
- 1 - Installation Instructions # 17019
- 1 - Installation Instructions # 17039
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 16.3102 | Rear Control Arm Bushing Replacement Kit | Civic 84-87
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 16.3102
starstarstarstarstar" great bushings well designed and fit perfectly "
After installing these in my 1987 civic hatchback the rear axle feels tight again with like-new handling. Definitely purchase this without worries! And make your car happy too!
verified_user Verified Buyer - matthew stokes - . Energy Suspension 16.3102 - 5 out of 5starstarstarstarstar
Just finished the suspension resto on my 86 Civic Si Hatchback which was my first brand new car. The bushings all fit perfectly and look great on the parts even though they will be concealed after final installation. Thanks for the great customer service, great products which I will always recommend and use again. Also, good pricing.
verified_user Verified Buyer - jorge - . Energy Suspension 16.3102 - 5 out of 5