unarchive In The Box of 16.3120 keyboard_arrow_down
- 4 of 2904 - Upper Control Arm Bushings
- 4 of 15.10.654.39 - Metal Sleeve - .875" x .500" x 1.850"
- 2 of 3518 - Lower Control Arm Bushings
- 2 of 3519 - Lower Control Arm Bushings
- 2 of 15.10.491.39 - Metal Sleeve - 1.000" x .563" x 2.480"
- 2 of 3520 - Lower Control Arm Bushings
- 2 of 15.10.655.39 - Metal Sleeve - 1.250" x .790" x 2.675"
- 2 of 8381 - Lower Control Arm Bushings
- 2 of 8382 - Lower Control Arm Bushings
- 2 of 15.10.613.39 - Metal Sleeve - 1.000" x .500" x 1.960"
- 2 of Containers of Grease
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Polyurethane.
Price: $89.31
Warranty: Lifetime Warranty
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 16.3120 | Honda S2000 | Front Control Arm Bushing Replacement Kit
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 16.3120
starstarstarstarstar" Review 2 Years Later "
Control arm bushings are still in the car and seem fine. Best Regards, Bob
verified_user Verified Buyer - Robert Raub - . Energy Suspension 16.3120 - 5 out of 5compare_arrows Compare with Similar Parts
question_answer Customer Questions and Answers
- Question:
- Do I need to reuse the outer shells of my stock bushing for the 16.3120?
- Answer:
- I am showing that you will reuse the lower control arm outer shells, but the Upper arms you will not need to outer shells of your stock bushings.
- Question:
- I just bought bushing kit 16.3120 for my 04 S2000 front and rear control arms energy suspension bushing kit from CARid.com. I'm installing today and know it that some bushing is not fit right. What is the next step I need to do to get this problem fixed?
- Answer:
- You may have received a miss-pack you-you will need to verify what parts you received in the kit. Then Contact the dealer Carid.com to get the correct parts sent to you.
