16.5122 | Sway Bar and Endlink Bushings 23 mm | Prelude 1992-2001

  • 16.5122 360image 1
  • 16.5122 Rear Sway Bar and End Link Bushings - 23mm (0.90 inch)
  • 16.5122 Rear Sway Bar and End Link Bushings - 23mm (0.90 inch)
  • 16.5122 Rear Sway Bar and End Link Bushings - 23mm (0.90 inch)
  • 16.5122 Rear Sway Bar and End Link Bushings - 23mm (0.90 inch)
  • 16.5122 Rear Sway Bar and End Link Bushings - 23mm (0.90 inch)
  • 16.5122 360image large 1

Rear Sway Bar and End Link Bushings - 23mm (0.90 inch)

Manufacturer: Energy Suspension
Part Number: 16.5122
Rating starstarstarstarstar7 Reviews
:(?)
Black
Red
:(?)
Free Lifetime Warranty Upgrade
Price: $29.19

check_box In Stock check_box Ships Immediately

  • 2 - 15.12.39.39 - Greasable Sway Bar Bracket
  • 2 - 5338 - 23mm Greasable Rear Sway Bar Bushing
  • 2 - 8189 - End Link Bushing
  • 4 - 15.03.41.39 - .688OD X .312ID X .080TH Flat Washers
  • 1 - 17145 - Installation Instructions
  • 1 - 9.11103 - 6 Gram Tube of Formula 5 Prelube
Suggested part for 16.5122: dll124-rear
dll124-rear Rear Sway Bar Lateral Locks - 23-24mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
Suggested part for 16.5122: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
3 - 5ML High Performance Grease by Energy
  • Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 16.5122 to 81132
Prothane 81132
Polyurethane.
Price: $5.66
Warranty: Lifetime Warranty

question_answer Ask us a Question

FitmentRear Sway Bar and End Link Bushings - 23mm (0.90 inch) 16.5122 fits these vehicles:
Details
Polyurethane Rear Sway Bar and Endlink Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

16.5122 | Sway Bar and Endlink Bushings 23 mm | Prelude 1992-2001

Only Fits 23mm Bar
Polyurethane Rear Sway Bar and Endlink Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.
Footnotes

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif
Energy Suspension 16.5122

Product Reviews for 16.5122 | Sway Bar and Endlink Bushings 23 mm | Prelude 1992-2001

5 Star (7)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 16.5122

5 out of 5 based on 7 user reviews. Write a Review
B
verified_user

starstarstarstarstar" good product "

the parts fit perfectly and it was an easy install. I choose to slice through the rod end bushings to make the install easier.

verified_user Verified Buyer - - . Energy Suspension 16.5122 - 5 out of 5
G
verified_user

starstarstarstarstar" Review 1 Year Later "

Good!

verified_user Verified Buyer - - . Energy Suspension 16.5122 - 5 out of 5
T
verified_user

starstarstarstarstar" Fits Great, Works Great "

Fits perfect and works perfect. I bought it because I had to piece together a "master bushing kit" for my 98 Base Prelude. The car feels much stiffer and more precise now. I have only had the car running for 2 days now, but it makes the car feel much more fun. 5/5! The hardest part is removing the old bushings. You have to drill and press them out then cut the outer races and then press in the new ones. This needs to come with more grease for everything though. It gets used fast.

verified_user Verified Buyer - - . Energy Suspension 16.5122 - 5 out of 5
H
verified_user

starstarstarstarstar" GOOD ITEM EASY TO INSTALL "

So easy to install.

verified_user Verified Buyer - - . Energy Suspension 16.5122 - 5 out of 5

compare_arrows Compare with Similar Parts

This Part
16.5122 compare
$29.19
This Part
Prothane
Prothane compare
$5.66
($23.53) cheaper
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Bushing Material: Polyurethane
View Part