16.5123 | Front Sway Bar-Endlink Bushings - 25 mm | Honda Prelude

  • 16.5123 360image 1
  • 16.5123 Front Sway Bar and End Link Bushings - 25mm (0.98 inch)
  • 16.5123 Front Sway Bar and End Link Bushings - 25mm (0.98 inch)
  • 16.5123 Front Sway Bar and End Link Bushings - 25mm (0.98 inch)
  • 16.5123 Front Sway Bar and End Link Bushings - 25mm (0.98 inch)
  • 16.5123 Front Sway Bar and End Link Bushings - 25mm (0.98 inch)
  • 16.5123 360image large 1

Front Sway Bar and End Link Bushings - 25mm (0.98 inch)

Manufacturer: Energy Suspension
Part Number: 16.5123

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $31.77

check_box In Stock check_box Ships Immediately


  • 2 - 5340 - 25mm Sway Bar Bushings
  • 2 - Outer Brackets for 5340 - Includes Zerk Grease Fittings
  • 4 - Washers for 5340 Brackets
  • 4 - 8181 - End Link Grommets
  • 4 - Washers for 8181
  • 1 - 9.11108 Formula 5 Prelube Tube
  • 1 - Installation Instructions # 17145
Suggested part for 16.5123: kll127
kll127 Sway Bar Lateral Locks - 25-27mm
Whiteline Gold Color Plated - 3 Year warranty

Suggested part for 16.5123: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
3 - 5ML High Performance Grease by Energy

Suggested part for 16.5123: dll127
dll127 Front Sway Bar Lateral Locks - 25-27mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

  • Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 16.5123 to 81130
Prothane 81130
Polyurethane.
Price: $7.38
Warranty: Lifetime Warranty

question_answer Ask us a Question

FitmentFront Sway Bar and End Link Bushings - 25mm (0.98 inch) 16.5123 fits these vehicles:
Details
Polyurethane Front Sway Bar and Endlink Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

16.5123 | Front Sway Bar-Endlink Bushings - 25 mm | Honda Prelude

Only Fits 25mm Bar
Polyurethane Front Sway Bar and Endlink Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.
Footnotes

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif
Energy Suspension 16.5123

Product Reviews for 16.5123 | Front Sway Bar-Endlink Bushings - 25 mm | Honda Prelude

5 Star (7)
78%
4 Star (1)
11%
3 Star (0)
0%
2 Star (1)
11%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 16.5123

5 out of 5 based on 9 user reviews. Write a Review

T
verified_user

starstarstarstarstar" Review 1 Year Later "

I havent had a single issue with them since Ive bought them! They fit so nice on my car and the installation was super easy! Im glad I bought them!

verified_user Verified Buyer - - . Energy Suspension 16.5123 - 5 out of 5
T
verified_user

starstarstarstarstar" Fits Great, Works Great "

Fits perfect and works perfect. I bought it because I had to piece together a "master bushing kit" for my 98 Base Prelude. The car feels much stiffer and more precise now. I have only had the car running for 2 days now, but it makes the car feel much more fun. 5/5! The hardest part is removing the old bushings. You have to drill and press them out then cut the outer races and then press in the new ones. This needs to come with more grease for everything though. It gets used fast.

verified_user Verified Buyer - - . Energy Suspension 16.5123 - 5 out of 5
L
verified_user

starstarstarstarstar" work very well. "

These bushings work as designed. Give my car a much more stable ride.

verified_user Verified Buyer - - . Energy Suspension 16.5123 - 5 out of 5
M
verified_user

starstarstarstarstar" Great product "

Great quality part, easy install and excellent fit. Great upgrade from the factory bushing.

verified_user Verified Buyer - - . Energy Suspension 16.5123 - 5 out of 5

compare_arrows Compare with Similar Parts


This Part
16.5123 compare
$31.77
Prothane
Prothane compare
$7.38
($24.39) cheaper
  • star_borderstar_borderstar_borderstar_borderstar_border
  • Bushing Material: Polyurethane