Front Shock Bushings - Honda Civic - 16.8102

  • 16.8102 360image 1
  • 16.8102 Front Shock Mount Bushings Honda / Acura
  • 16.8102 Front Shock Mount Bushings Honda / Acura
  • 16.8102 Front Shock Mount Bushings Honda / Acura
  • 16.8102 Front Shock Mount Bushings Honda / Acura
  • 16.8102 Front Shock Mount Bushings Honda / Acura
  • 16.8102 360image large 1

Front Shock Mount Bushings Honda / Acura

Manufacturer: Energy Suspension
Part Number: 16.8102

Color: (?)
Black
Red

Exclusive for DST Customers: (?)
Free Lifetime Warranty Upgrade
Price: $26.57

check_box In Stock check_box Ships Immediately


  • 4 - 2272 - Lower Control Arm Shock Mount Bushings
  • 4 - 8096 - Upper Control Arm Shock Mount Bushings
  • 2 - 15.10.245.39 - .750" X .480" X 1.960" Center Sleeves
  • 2 - 9.11102 - 10 Gram Tube of Formula 5 Prelube
  • 1 - 17162 - Installation Instructions
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 16.8102 to 8901
Prothane 8901
Polyurethane.
Price: $22.17
Warranty: Lifetime Warranty

FitmentFront Shock Mount Bushings Honda / Acura 16.8102 fits these vehicles:
Details
Polyurethane Front Shock Mount Bushings
They give any vehicle's suspension instant response and control using increased durometer (firmness) material settings. Give any shock absorber maximum efficiency while extending its life!

Front Shock Bushings - Honda Civic - 16.8102

Polyurethane Front Shock Mount Bushings
  • Adds performance to any shock!
  • Benefit from better durability over O.E.M. rubber bushings.
  • Important to use for competition of any kind.
  • Made of Energy's HYPERFLEX performance polyurethane to add performance and durability
Footnotes
  • One Set Will Cover the Left and Right Side

Front Shock Bushings | 1988-2000 Chevrolet K3500

A vehicle's struts work to maintain driving control through rough areas and compensate for the wheels excessive bouncing along the strut. When the coil spring moves up and down, the strut is needed to prevent it from bouncing around. If you have worn out shock bushings, the strut itself can shake around, and that is where the Energy Suspension 16.8102 front shock bushings come in. They help prevent the vibrations of the struts in everyday vehicles like the 1990-2001 Acura Integra and keep vehicles like the 1993-1997 Honda Del Sol stable when going down a roadway at high speeds. However, over the course of a vehicle's life, the rubber bushings will break down from various hazards, causing the rubber to hollow out and loosen its grip on the strut. These Energy Suspension shock bushings are made out of polyurethane, which provides great benefits like better handling performance and a smoother ride than with worn out rubber bushings.

16.8102 1990-2001 Acura Integra Energy Suspension

old rubber body mount

What Happens to Rubber Over Time?

While driving down roads back and forth every day, vehicles like the Integra experience the everyday hazards that can break down rubber bushings, like engine chemicals, road salts, debris, dirt, and general wear and tear. This can cause the rubber strut bushings to hollow out and lose their grip on the strut. When this happens, the strut can vibrate within the coil spring and cause some front-end shimmy, poor handling, and clunking sounds from the front end. These issues require a sturdier and stronger alternative to rubber that can have a better grip on the strut.


What Are the Benefits of these Bushings?

That is why these 16.8102 front shock bushings are recommended for those experiencing these problems and wanting to see their vehicle's suspension system become more stable than it once was. These bushings are made out of polyurethane, a material that is stronger and more durable than rubber. It provides a better grip on the strut and does not let it rattle since poly is not as flexible. Also, it cannot break down as easily from the hazards that would normally break down rubber. While rubber provides more cushioning and vibration absorption, poly provides a more long-term, resilient, and efficient feel to the vehicle, improving the driver's experience behind the wheel.

So, if you are looking for an alternative to the rubber shock mount bushings that lasts longer, is more resilient, and increases performance for your Acura Integra, Honda del Sol, or another similar vehicle, pick up a set of these 16.8102 front shock bushings as soon as you can.

1993-1997 Honda Del Sol Body Mount
Energy Suspension 16.8102

Product Reviews for Front Shock Bushings - Honda Civic - 16.8102

5 Star (59)
95%
4 Star (3)
5%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 16.8102

5 out of 5 based on 62 user reviews. Write a Review

D
verified_user

starstarstarstarstar" Was easy to install "

After getting the old shock bushings out of the lower control arm the new bushings were easy to install. Didnt use the upper control arm bushings due to new upper control arms have new ones in them.

verified_user Verified Buyer - - . Energy Suspension 16.8102 - 5 out of 5
L
verified_user

starstarstarstarstar" Review 2 Years Later "

They holding good.

verified_user Verified Buyer - - . Energy Suspension 16.8102 - 5 out of 5
T
verified_user

starstarstarstarstar" Review 2 Years Later "

No cracks, still ok.

verified_user Verified Buyer - - . Energy Suspension 16.8102 - 5 out of 5
C
verified_user

starstarstarstarstar" Great quality "

Very easy to install, smooth ride, installed them 1,000 miles ago and no complaints.

verified_user Verified Buyer - - . Energy Suspension 16.8102 - 5 out of 5

compare_arrows Compare with Similar Parts


This Part
16.8102 compare
$26.57
Prothane
Prothane compare
$22.17
($4.40) cheaper

question_answer Customer Questions and Answers


Question:
What is the ID of the 16.8102 kits metal sleeve?
Answer:
The Inner metal sleeve of the 16.8102 kit is .480

Question:
Will I need to reuse the outer shells for part number 16.8102?
Answer:
No, part number 16.8102 will not need to reuse the outer shell.

Question:
Do you price match on part number 16.8102?
Answer:
No, we do not price match.

Question:
I may have received a miss-pack when I received the kit 16.8102R how do I resolve this issue?
Answer:
You will need to contact your dealer you purchase your parts from. if you purchased them from us you can call us at DST 888-406-2330 or email us at sales@suspenion.com to get this issue fixed.