unarchive In The Box of 2.5112 keyboard_arrow_down
- 2 of Sway Bar Bushings - 5930
- 2 of End Link Bushings - 8376
- 2 of Metal Sleeves - 15.10.564.39 (.750 X .480 X 1.500 inch)
- 2 of Metal Washers - 15.03.57.39 (1.250 X .500 X .080 inch)
- Installation Instructions - 17073
add_shopping_cart Suggested Parts 2keyboard_arrow_down
3 - 5ML High Performance Grease by Energy
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 2.5112 | Jeep Wrangler Jk Front Sway Bar and Endlink Bushigns
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 2.5112
starstarstarstarstar" exactly as ordered "
We have a 1996 35 RV and the front sway bar bushings had all rotted away. Trying to find these through the RV industry is impossible. We measured the sway bar bought these 31mm, bolted them up and they worked PERFECTLY. And now, no more RV sway. Thank you.
verified_user Verified Buyer - Richard DeYoung - . Energy Suspension 2.5112 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Do the sway bar bushings have a split/crack (I don't see one in the pictures) so they can be slipped over the sway bar, or do they have to be slid on from an end, which would make it nearly impossible to do with the curves?
- Answer:
- 2.5112 does have a cut on one side to help with installation.
