unarchive In The Box of 2.7107 keyboard_arrow_down
- 2 of 7141 - Rear Track Arm Bushing
- 2 of 15.10.392.39 - Sleeves
- 2 of 15.02.49.39 - Shells
- 2 of 9.11108 - Grease, 5ml
- 1 of 17P17632 - Installation Instructions
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
2.7107 | Rear Track Arm Bushings | Jeep Wrangler JK 2007-2014
Energy Suspension Track Arm Bushings
Track arms, also known as panhard rods, are designed to enhance driver control and safety while cornering through several tasks: Keeping your suspension centered, reducing body roll, and increasing driver control. Now, even with the track arm installed your suspension can shift while you corner. The amount of shifting that occurs depends largely on the quality of bushings you have installed for your track arm.
OE track arm bushings are most commonly made of soft rubber. Rubber, while able to absorb a great deal of vibrations from the road, simply flexes too much to be a decent material for track arm bushings. Energy Suspension makes all of their track arm bushings out of Hyperflex polyurethane, a material that not only offers better performance than rubber, it'll also last much longer. Capable of withstanding great amounts of heat, pressure, and road contamination, these Hyperflex bushings are guaranteed to outlast and outperform the OE. Now, due to polyurethane's firmer nature, there is a good chance that your NVH may increase slightly once these bushings are installed. But, the increase in your control and safety while cornering is well worth it. Plus, Energy Suspension covers all of their track arm bushings with a two-year warranty handled in-house here at DST.
Product Reviews for 2.7107 | Rear Track Arm Bushings | Jeep Wrangler JK 2007-2014
- 5 Star (2)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 2.7107
starstarstarstarstar" Review 1 Year Later "
These Bushings tightened up the suspension on our 2011 Rubicon! I highly recommend Energy Suspension bushings! Excellent quality and durability!
verified_user Verified Buyer - Marc Franklin - . Energy Suspension 2.7107 - 5 out of 5starstarstarstarstar" Great Item, good as OEM "
Part was make for a wrangler, I bought a track arm that had Hein Ball ends on it that went bad in 2 months, I cut off the ball ends and turned new round parts to press your parts into, than welded them onto the track arm ,pressed your parts into the new part I welded on and works great, Jeep liberty 2008 4 lift
verified_user Verified Buyer - Keith Teesdale / tek9691_6ioils8bcu - . Energy Suspension 2.7107 - 5 out of 5