3.3101 | Front Control Arm Bushing Kit | Chevelle 1966-1972

  • 3.3101 360image 1
  • 3.3101 Front Control Arm Bushings - (All Round Bushings)
  • 3.3101 Front Control Arm Bushings - (All Round Bushings)
  • 3.3101 Front Control Arm Bushings - (All Round Bushings)
  • 3.3101 Front Control Arm Bushings - (All Round Bushings)
  • 3.3101 Front Control Arm Bushings - (All Round Bushings)
  • 3.3101 360image large 1

Front Control Arm Bushings - (All Round Bushings)

Manufacturer: Energy Suspension
Part Number: 3.3101

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $103.55

check_box In Stock check_box Ships Immediately


  • 4 of 3001 - upper control arm bushings
  • 4 of 15.10.11.39 - (13/16Inch O.D.x.675Inch I.D.x1.562Inch sleeve)
  • 4 of 15.02.05.39 - E shells (1.27Inch O.D. x 1.11Inch I.D. x 1.10Inch Total Length)
  • 2 of 3006 - lower control arm bushings (front pos.)
  • 2 of 15.10.10.39 - (3/4Inch O.D. x 1/2Inch I.D. x 2.4Inch sleeve)
  • 2 of 15.02.01.39 - A shells (1.3Inch O.D. x 1.2Inch I.D. x 2.08Inch Total Length)
  • 2 of 3008 - lower control arm bushings (rear pos.)
  • 2 of 15.10.10.39 - (3/4Inch O.D. x 1/2Inch I.D. x 2.4Inch sleeve)
  • 2 of 15.02.02.39 - B shells (1.6Inch O.D. x 1.4Inch I.D x 2.08Inch Total Length)
  • 1 of 17444 - installation instructions
Suggested part for 3.3101: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

Suggested part for 3.3101: 9.11104
9.11104 Formula 5 Prelube - 8oz. Tub Polyurethane Bushing Grease
8 ounce tub of High Performance Grease by Energy

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 3.3101 to 7217
Prothane 7217
Polyurethane.
Price: $73.35
Warranty: Lifetime Warranty

question_answer Ask us a Question

FitmentFront Control Arm Bushings - (All Round Bushings) 3.3101 fits these vehicles:
Details
Polyurethane Front Control Arm Bushings
On the front of vehicles, they make a dramatic improvement in the way they handle with quicker steering response and greater vehicle control.

3.3101 | Front Control Arm Bushing Kit | Chevelle 1966-1972

Rear Lower Bushing is 1.65 inch OD.
Polyurethane Front Control Arm Bushings
  • Maintains proper alignment under extreme conditions on and off road and during competition.
  • Improves vehicle handling, cornering and overall control
  • Full floating, for smoother operation.
  • Made of Energy's HYPER FLEX performance polyurethane to add performance and durability
Footnotes
  • Fits Models with All Round Bushings
  • Fits Models with 1.65 Inch Rear Lower Bushings Only
  • One Set Will Cover the Left and Right Side

HyperFlex Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.

Energy Suspension Control Arm Bushing
Energy Suspension Control Arm Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Be sure to use Formula 5

A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif
Energy Suspension 3.3101

Product Reviews for 3.3101 | Front Control Arm Bushing Kit | Chevelle 1966-1972

5 Star (3)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 3.3101

5 out of 5 based on 3 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Review 2 Years Later "

The steering and handling in my 72 Nova is still just as smooth and responsive as the day I installed these. Would absolutely use them again.

verified_user Verified Buyer - - . Energy Suspension 3.3101 - 5 out of 5
A
verified_user

starstarstarstarstar" Review 1 Year Later "

I am waiting to get some more parts, before I install these parts, but the bushings look just like I want!!

verified_user Verified Buyer - - . Energy Suspension 3.3101 - 5 out of 5
S
verified_user

starstarstarstarstar" Review 1 Year Later "

Perfect fit to replace the worn out rubber bushings, something I have been wanting to do for a while. Nice to drive my 69 Camaro without the sloppy steering.

verified_user Verified Buyer - - . Energy Suspension 3.3101 - 5 out of 5
Fitment for 3.3101

compare_arrows Compare with Similar Parts


This Part
3.3101 compare
$103.55
Prothane
Prothane compare
$73.35
($30.20) cheaper

question_answer Customer Questions and Answers


Question:
I ordered part number 3.3101 from Tognotti's auto world in Sacramento and it came missing an upper control arm bushing. Can you just send me that missing bushing?
Answer:
As a dealer of Energy, since you did not order through us, we cannot send you a replacement bushing. However, you would be able to purchase the individual piece.

Question:
Is there a way to order just the Inner sleeves out of the 3.3101 kit?
Answer:
Yes, we can sell just the pieces out of the 3.3101 kit, I am showing the Upper control arm inner sleeve is piece number 15.10.11.39, the lower is piece number 15.10.10.39.

Question:
Are the black bushings in kit number 3.3101 graphite impregnated?
Answer:
All black polyurethane bushings do have a small amount of graphite in them only to enhance the black color.