• 3.3132 Rear Control Arm Bushings
  • 3.3132 Rear Control Arm Bushings

Rear Control Arm Bushings

Manufacturer: Energy Suspension
Part Number: 3.3132
Rating 218 Reviews


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $112.25

In Stock Ships Immediately

Polyurethane Rear Control Arm Bushings
On the rear of vehicles, they make a dramatic improvement in the way they handle with quicker steering response and greater vehicle control.

Rear Control Arm Bushings | 1965-1973 Chevy Chevelle

Measure before purchasing to insure fitment.
Will not fit Heavy Duty suspension
Polyurethane Rear Control Arm Bushings
  • Maintains proper alignment under extreme conditions on and off road and during competition.
  • Improves vehicle handling, cornering and overall control
  • Full floating, for smoother operation.
  • Made of Energy's HYPERFLEX performance polyurethane to add performance and durability
  • Includes New Outer Metal Shells
  • One Set Will Cover the Left and Right Side
FitmentRear Control Arm Bushings 3.3132 fits these vehicles:
  • Position #1 and #2
  • 6 - 3088 - Thrust Washers
  • Position #3
  • 6 - 3087 - Thrust Washers
  • Position #4
  • 2 - 3089 - Thrust Washers
  • Positions #1 through #4
  • 8 - 3021C - Control Arm Bushings
  • 1 - Small 911108 Formula 5 Prelube Tub
  • 1 - Installation Instructions - #17019
  • 1 - Installation Instructions - #17041
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
  • Cross Reference from 3.3132 to 7225Prothane 7225
    Price: $100.17
    Warranty: Lifetime Warranty

Rear Control Arm Bushings 65-87 El Camino | 65-73 Chevelle

These Rear Control Arm Bushings will restore the ride of your '70-'76 Monte Carlo as well as several Buick models by replacing worn or degraded rubber control arm bushings. As the original rubber bushings wear down, the alignment angles of your car can be thrown off causing uneven tire wear, steering wander, and less responsive handling during a turn, but this can be fixed for good with polyurethane rear control arm bushings.

rear control arm bushings 65-73 chevelle

deformed rubber rear control arm bushings

Worn Rear Control Arm Bushings

If you own a classic Chevy, or you've found one to restore, then the original suspension bushings are very likely shot. Using rubber replacement bushings will make your ride "like new" but if you've seen the original bushings then you know what rubber bushings will eventually look like, and even new OE rubber bushings will flex with suspension travel and change wheel alignment during a sharp turn. Here in north central Texas where even driveways can be rough (and a mile long) vulnerable rubber bushings are not a long term solution for your suspension.

polyurethane rear control arm bushings for chevy cars

Restore or Upgrade?

If you've already replaced those original rear control arm bushings, would you be interested in a longer lasting bushing that increases response, decreases uneven tire wear, and holds wheel alignment during sharp turns?

Energy Suspension's Polyurethane Rear Control Arm Bushings for early model Chevelle, El Camino, Monte Carlo and several Buicks will replace vulnerable rubber bushings and last the life of your car. Increased longevity is not the only upside to these bushings. Rubber does a good job at absorbing vibration but is not very good when it comes to holding the control arms in alignment, especially during a hard turn, and that is where polyurethane really shines.

energy suspension rear control arm bushings 65-87 el camino

Alignment for Life

Polyurethane is a much more durable substance than rubber and doesn't deflect which means your rear control arms are held in alignment along with your rear wheels. The alignment of your wheels affects tire wear and even traction during a turn, so making sure it's stable is important. Unlike rubber, these polyurethane bushings are not degraded by heat, wear, and oils which can cause rubber to crack or possibly degrade until they fall right off your car. Suspension.com offers an exclusive lifetime warranty for these bushings which we will handle for you in house.

Energy Suspension 3.3132

Product Reviews for Rear Control Arm Bushings 3.3132

Energy Suspension 3.3132

5 out of 5 based on 218 user reviews. Write a Review

They were straight forward to install and made a noticeable improvement over the stock rubber bushings would use these again if needed.
5 out of 5 - great part
Dylan Van Horn - . Energy Suspension 3.3132
DAVID NAKAMOTO - . Energy Suspension 3.3132
They are still performing as advertised.
5 out of 5 - Review 2 Years Later
David Point - . Energy Suspension 3.3132
These bushings are the best replacement bushings for my purpose. Very high quality and fitment was exact.
5 out of 5 - A+ Great Product!
Shawn C Keeley - . Energy Suspension 3.3132
i did have one steel liner where the bushing just dropped in. hoping it will be fine
5 out of 5 - like
mark lindquist - . Energy Suspension 3.3132
Restoration shop did the install. I ordered these on my own and delivered the bushings to the shop without discussing it with them in advance. When I showed up they said "Perfect. Thats what we would have ordered if you didnt do it for us". Energy Suspension products are well-respected across the board..... and its a replacement job that youll only have to do ONCE!
5 out of 5 - Excellent Product/Good Value
Peter J Davis - . Energy Suspension 3.3132
Haven't got to try them out yet, but did get them installed in my 1968 Chevelle. Hoping I will get to try them out soon to see if they help with my wheel hopping. I am very satisfied with them. They did help a lot with the rear ends position and stance of the car. Think they will help a lot. <br />
Rosch Bedingfield - . Energy Suspension 3.3132
We just yesterday have installed the kit. The kit is perfect and we could feel a remarkable improvement of the cars behavior on the road. The most problems we had, was to remove the old parts without damaging the arms. Gladly again! Louis and Mikko
5 out of 5 - Great product
Louis - . Energy Suspension 3.3132
Easy installation, great quality, have not completely finished the total restoration yet but should be completed by the end of September. Thanks, already have shared the ease of installation and quality with all of my club members (street machines of rochester) about 140 members, Thanks again. John
5 out of 5 - excellent
John P. Gross - . Energy Suspension 3.3132

Product Reviews for Energy Suspension Rear Control Arm Bushings

Did their job! I had what I think was called wheel hop.. the rear end seem to bounce or wiggle when driving. Research online suggested these parts and after ordering the wrong parts from Autozone Online I found this suspension.com and they sent the Right Parts that did the trick!
5 out of 5 - Great Value
Orlando Braxton - . Energy Suspension 11.3104
Over all, nominal. Installation was as expected. Would be nice if Energy would offer to include the metal pieces for the C5. These cars are getting quite old now and are starting to wear these items. When replacing the bushings, just would be nice to have the option of ordering them from one source.
3 out of 5 - OK product. Only if you do not need any of the supporting metal bits.
Steve Smith - . Energy Suspension 3.3177
The bushings seem to be holding up well for a cruiser!
5 out of 5 - Review 2 Years Later
Pete Moncada - . Energy Suspension 3.3123
There is no how to videos for track bar installation, directions arent very descriptive. Editors note: The instructions would have been better if they were actual pictures of the suspension parts. Energy is working on making their instructions better. \n
5 out of 5 - Quality materials
Pete - . Energy Suspension 3.3194
My mechanic could get the factory bushings out without destroying the outer shell. Since the set does not include the outer shells, the set is useless for me. What not provide the outer shell? Editors Note: The outer shell is very hard to make. In some cases the shell will different dimensions in 1-3 different sizes so it will press into the component and stay.
1 out of 5 - Decent but why reuse existing outer shells?
Jeff Reynoldson - . Energy Suspension 3.3152
Perfect fit and well made.
5 out of 5 - Excellent
Bobby Tompkins - . Energy Suspension 8.3133
Very pleased with product.
5 out of 5 - Parts worked perfect
Michael Follmer - . Energy Suspension 16.3112
I purchased the red polys for my Z. Installation was challenging because of the nature of the Z itself, and not because of the product. They fit very snugly and are still pliant and beefy two years later. I am hard on the suspension components when I drive, as I believe less than 1G in the corners is for sissies ;-) The suspension is still just as tight as it was the day I installed them. I am very pleased and impressed with this brand and will purchase them again once they wear out
5 out of 5 - Review 2 Years Later
Kate Somerville - . Energy Suspension 7.3105
Pretty good so far.
5 out of 5 - Review 2 Years Later
Dain Burgess - . Energy Suspension 7.3119
Bushes working well although does not get used that often.
5 out of 5 - Review 2 Years Later
Mike Cartmer - . Energy Suspension 7.3104

Fitment for 3.3132
Click on the image and drag left or right to rotate.

Compare with Similar Parts

This Part


  • 218
  • This part
  • Bushing Material: Polyurethane

This Part


$100.17($12.08) cheaper

  • 2
  • Bushing Material: Polyurethane

View Part