unarchive In The Box of 3.3152 keyboard_arrow_down
- 6 of 3147 - Control Arm Bushings
- 6 of 3150 - Thrust Washers
- 8 of Metal Sleeves
- 2 of 3199 - Control Arm Bushings
- 2 of 3204 - Thrust Washers
- 2 of Metal Shells
- 2 of 9.11108 - Grease Packets
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 3.3152 | Rear Control Arm Bushing Kit | Chevrolet Bel Air 59-64
- 5 Star (1)
-
-
- 50%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (1)
-
-
- 50%
-
Energy Suspension 3.3152
starstar_borderstar_borderstar_borderstar_border" Decent but why reuse existing outer shells? "
My mechanic could get the factory bushings out without destroying the outer shell. Since the set does not include the outer shells, the set is useless for me. What not provide the outer shell? Editors Note: The outer shell is very hard to make. In some cases the shell will different dimensions in 1-3 different sizes so it will press into the component and stay.
verified_user Verified Buyer - Jeff Reynoldson - . Energy Suspension 3.3152 - 1 out of 5starstarstarstarstar" Excellent product "
These are great quality items that look and fit perfect. Straight forward assembly instructions. Very affordable and the shipping was super fast. Thanks
verified_user Verified Buyer - Mathew Duckett - . Energy Suspension 3.3152 - 5 out of 5