unarchive In The Box of 3.4123 keyboard_arrow_down
- 4 - 4076 - #1,2 MOUNT TOP
- 2 - 4077 - #3 MOUNT TOP
- 2 - 4078 - #1 MNT BOTM
- 4 - 4079 - #2,3 MNT BOTM
- 1 - Installation Instructions
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Body Mount Bushings | 1988-1998 Chevrolet C3500
The body mount is what keeps the entire vehicle together. They provide a solid connection between the frame and the body of the vehicle, and they also cushion vibrations from the road and engine. If you are driving the vehicles that these bushings were made for, like the 1988-1998 Chevrolet C3500 and the 1988-1998 GMC Suburban V2500, you will likely need to replace the original rubber body bushings because of their age or the amount of wear that is on them. When the body mounts are worn down, the vehicle's frame and body's connection may start to become loose and look misaligned in some areas. Luckily, this 3.4123 body mount bushings kit can restore alignment between the cab and the bed that has been thrown off by the bad body mounts. They're great for older vehicles that are either used as work vehicles or displayed for others to see!
The Symptoms of Worn Out Body Mounts
Over the course of a vehicle's life, the connection between the frame and body of the vehicle will deteriorate from general wear and tear, temperature shifts, dirt, and debris. However, if they are exposed to other extraneous circumstances, like constantly going off-road or hauling heavy loads, the body mount bushings may wear out more than usual. Since rubber mounts are softer they can reduce a lot of vibration, but continual compression and expansion eventually breaks down the rubber. Multiple hazards like road salts, salty coastal air, dirt, debris, and general stress will wear down the bushings quicker than they normally would from ordinary strain. When the bushings fail, the vehicle's body will start to sag in certain areas and can cause areas like the doors, hood, and trunks to become more difficult to open or close. One of the main ways to tell if your vehicle is sagging is to look at its profile and see if there are any areas where it is crooked.
What Makes these Body Mounts so Special?
These 3.4123 body mounts have the ability to keep the vehicle together while driving through rough terrain and hauling heavy loads. They are made of polyurethane, a material that is stronger than the rubber that comprises the factory bushings. They provide a stronger connection between the body and frame and prevent sagging and misalignment between them. While rubber can absorb more vibrations, poly lasts much longer and can resist the strain of repeatedly being pressed and released. In addition, we are so confident in polyurethane's performance that all Energy Suspension polyurethane parts are covered by a lifetime warranty.
Whether your vehicle is on the road or in a garage, if you notice your vehicle's body is sagging, then the 3.4123 body mount bushings kit will help put that vehicle back to the way it's supposed to be!
Product Reviews for 3.4123 | Body Mount Bushings Kit - Chevrolet C1500 Pickup
- 5 Star (22)
-
-
- 92%
-
- 4 Star (2)
-
-
- 8%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 3.4123
starstarstarstarstar" Perfect "
Installed on a 1992 c1500 single cab. Comes with only new bushings no hardware. Fitment is great had no issues. 2 thinner ones for radiator support and 4 thicker ones for the cab.
verified_user Verified Buyer - Jack Butler - . Energy Suspension 3.4123 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
They have cracked. Editors note: When tightening the bolt you must use the OEM torques specs for the cab mounts. If you over torque them that will cause the mounts to crack.
verified_user Verified Buyer - Richard Bailey - . Energy Suspension 3.4123 - 5 out of 5starstarstarstarstar" Great product! Simplicity! "
Easy to read instructions! Quality made! Took 45min. To install!
verified_user Verified Buyer - Eric J Atkinson - . Energy Suspension 3.4123 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
Works great no issues body lines meet up great service and good shipping.
verified_user Verified Buyer - Cody Johnson - . Energy Suspension 3.4123 - 5 out of 5compare_arrows Compare with Similar Parts
question_answer Customer Questions and Answers
- Question:
- Where does the 4076 and 4077 bushings in kit number 3.4123 go?
- Answer:
- Per the instructions for the 3.4123, the 4076 is the upper bushing at your Rad support, and the 4076, is your front and middle cab mount bushings.
- Question:
- Does part number 3.4123 include the radiator support bushings as well?
- Answer:
- Yes, part number 3.4123 does include the radiator support bushings.
- Question:
- Is part number 3.4123 for the body and the radiator support bushings? And am I able to order the hardware for this kit separately since it does not come with the kit for my 1998 Chevy K1500 standard cab?
- Answer:
- Yes, part number 3.4123 is for the body and the radiator support bushings. Yes, you will need kit number dhw012 for the hardware for the 1998 Chevy K1500 standard cab.
- Question:
- Does the kit 3.4123 come with hardware?
- Answer:
- Unfortunately No, Energy does not make hardware that is fitted for your vehicle. I do apologize for this inconvenience.
- Question:
- I need a set of 10 red body mounts for my gmc. If you have it, tell please, and inform me about price and delivery conditions to Russia Murmansk
- Answer:
- We do ship to Russia, shipping costs will depend on the items ordered and we need a verified address to estimate shipping costs.
- Question:
- Do you have a hardware kit for part number 3.4123 for my 92 Chevy c1500 rwd standard cab?
- Answer:
- Yes, the hardware kit part number would be DHW012 to go along with your 3.4123 bushings for your 92 Chevy c1500 rwd standard cab.
- Question:
- Can you purchase individual pieces from the kit 3.4123G in need of part 4076?
- Answer:
- Yes, you can if you type in Bulk- than the part number (4076) on our search bar you will be able to purchase the part you need from our site.
- Question:
- Does your bushing kit come with hardware?
- Answer:
- Energy kit 3.4123 does not include the hardware and I do not offer a hardware kit.
- Question:
- Will the kit 3.4123 fit my 1995 Chevy Silverado k1500 extended cab
- Answer:
- Yes, the part 3.4123 will fit your 1995 Chevy Silverado k1500 extended cab.
- Question:
- Will part 3.4123 fit my 1996 Chevy C1500 extended cab
- Answer:
- Yes, part 3.4123 is fitted for your 1996 Chevy C1500 extended cab