3.5118 | Chevrolet K20 Front Sway Bar and Endlink Bushings

  • 3.5118 360image 1
  • 3.5118 Front Sway Bar and End Link Bushings - 31.70 MM (1 1/4 Inch)
  • 3.5118 Front Sway Bar and End Link Bushings - 31.70 MM (1 1/4 Inch)
  • 3.5118 Front Sway Bar and End Link Bushings - 31.70 MM (1 1/4 Inch)
  • 3.5118 Front Sway Bar and End Link Bushings - 31.70 MM (1 1/4 Inch)
  • 3.5118 Front Sway Bar and End Link Bushings - 31.70 MM (1 1/4 Inch)
  • 3.5118 360image large 1

Front Sway Bar and End Link Bushings - 31.70 MM (1 1/4 Inch)

Manufacturer: Energy Suspension
Part Number: 3.5118

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $26.80

check_box In Stock check_box Ships Immediately


  • 2 - 5032 - 1-1/4" Sway Bar Bushings
  • 4 - 4901 Bushing Halves
  • 2 - 15.018 (1 Inch O.D. x 3/4 Inch I.D. x 1.75 Inch) Center Metal Sleeves for 4901
  • 1 - 9.11108 Formula 5 Prelube Tube
  • 1 - Installation Instructions # 17039
Suggested part for 3.5118: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
3 - 5ML High Performance Grease by Energy

Suggested part for 3.5118: dll133
dll133 Front Sway Bar Lateral Lock - 31-33mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 3.5118 to 71107
Prothane 71107
Polyurethane.
Price: $20.18
Warranty: Lifetime Warranty

question_answer Ask us a Question

FitmentFront Sway Bar and End Link Bushings - 31.70 MM (1 1/4 Inch) 3.5118 fits these vehicles:
Details
Polyurethane Front Sway Bar and Endlink Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

3.5118 | Chevrolet K20 Front Sway Bar and Endlink Bushings

Only Fits 1 1/4 inch Bar
Polyurethane Front Sway Bar and Endlink Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.
Footnotes

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif
Energy Suspension 3.5118

Product Reviews for 3.5118 | Chevrolet K20 Front Sway Bar and Endlink Bushings

5 Star (25)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 3.5118

5 out of 5 based on 25 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Review 2 Years Later "

Great parts.

verified_user Verified Buyer - - . Energy Suspension 3.5118 - 5 out of 5
D
verified_user

starstarstarstarstar" easy to install great quality "

Perfect replacement for my lifted truck.

verified_user Verified Buyer - - . Energy Suspension 3.5118 - 5 out of 5
D
verified_user

starstarstarstarstar" Review 2 Years Later "

Install was straight forward, truck has not been completed so ride is unknown at this time.

verified_user Verified Buyer - - . Energy Suspension 3.5118 - 5 out of 5
D
verified_user

starstarstarstarstar" Review 1 Year Later "

Great people to deal with. No doubt they really support the customers.

verified_user Verified Buyer - - . Energy Suspension 3.5118 - 5 out of 5

Fitment for 3.5118

compare_arrows Compare with Similar Parts


This Part
3.5118 compare
$26.80
Prothane
Prothane compare
$20.18
($6.62) cheaper

question_answer Customer Questions and Answers


Question:
Is the part 3.5118 the OEM stock bushings to fit an 85 K5 Blazer?
Answer:
To answer your question on the sway bar bushings, you will need to know the exact size of your front and rear sway bar since even if OEM stock all come in different sizes. Since they differ in size and manufacturers did not make the same sway bar on any of their vehicles. I do apologize for this inconvenience. Check out our blog of six different ways to measure https://www.suspension.com/blog/how-to-measure-a-sway-bar-6-different-ways/ Here is what we have fitted https://www.suspension.com/products/chevrolet_k5_blazer_4wd_1985 If you cannot find the size you need, you can look on our universals page it has more sizes https://www.suspension.com/universal-sway-bar-bushings.asp ...see more