• 4.9103 Front Axle Bump Stops - 2 Inch - Pair
  • 4.9103 Front Axle Bump Stops - 2 Inch - Pair
  • 4.9103 Front Axle Bump Stops - 2 Inch - Pair
  • 4.9103 Front Axle Bump Stops - 2 Inch - Pair

Front Axle Bump Stops - 2 Inch - Pair

Manufacturer: Energy Suspension
Part Number: 4.9103
Rating 83 Reviews


Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Price: $84.18

In Stock Ships Immediately

Polyurethane Front Bump Stops
Energy Suspension performance bump stops help cushion a collapsing suspension preventing bottoming out and expensive vehicle damage.

Front Axle Bump Stops | 99-04 F250-F350 Super Duty 4WD

Replacement for OE Bump Stops. 2 Inch Height
Polyurethane Front Bump Stops
  • Helps prevent damaging and expensive suspension component contact!
  • Many feature a specially designed mechanical interlock a course threaded stud and strong nylon locking nut system.
  • Guaranteed to last longer and operate more efficiently than original rubber stops.
  • Made of Energys HYPER FLEX performance polyurethane to add performance and durability.
  • One Set Will Cover the Left and Right Side
FitmentFront Axle Bump Stops - 2 Inch - Pair 4.9103 fits these vehicles:
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

Front Axle Bump Stops 00-04 Excursion | 99-04 F250 and F350 4WD Super Duty

Polyurethane Front Bump Stops from Energy Suspension will replace the vulnerable rubber bump stops on your 1999-2004 Ford F250 and F350 Super Duty 4WD or the 2000-2004 Excursion 4WD. The bumps stops keep the front axle from banging into the frame when the suspension travels in extreme suspension movements, preventing noisy bumps and possible damage to suspension components.

99-04 f250 and f350 super duty 4wd front axle bump stops

00-04 excursion 4wd front axle bump stops

Upgrade Your Bump Stops

The original bump stops installed on your F250 or F350 are made of rubber and do a good job of absorbing the jolt of the front axle hitting the frame when your suspension travels that far. These bump stops protect your axle, shocks, and other parts under your Ford, but rubber is a vulnerable material and as it wears down those bumps can become more harsh until those bump stops break off completely.

If you put your Super Duty through a daily commute of north Texas pastures, or weekend projects that include hauling a bed full of 2x4s, then your bump stops will have a hard time keeping up.

polyurethane front axle bump stops for super duty and excursion

Rubber vs Polyurethane Bump Stops

If you're looking for a longer lasting solution than rubber can provide then Energy Suspension's polyurethane bumps stops for the F250 and F350 Super Duty might be the answer.

Polyurethane is a much more durable material than rubber and can take the beating that a day-in day-out work truck will dish out. Besides being more resistant to wear, polyurethane also brushes off the elements like road salt, coastal climate, and motor chemicals that will degrade rubber. These bump stops are covered by Suspension.com's exclusive life time warranty so you'll never need to buy another set.

Energy Suspension 4.9103

Product Reviews for Front Bump Stops 4.9103

Energy Suspension 4.9103

5 out of 5 based on 83 user reviews. Write a Review

Hard to review a part you really cant feel but fitment was perfect and good quality. Looks like it will last!
5 out of 5 - Fit well
Brenton Prisendorf - . Energy Suspension 4.9103
Parts appear to be well made. Installation would have been easier if hardware came with self locking nuts similar to original equipment. That said all hardware was included just awkward to hold nut in place while tightening bolt. We have noticed an improvement in ride. Original equipment was very rotted and were no longer in place. Vendor was helpful in making sure I had the part I needed.
5 out of 5 - Well made. Fit the existing holes well.All hardware was included
Joseph McMichael - . Energy Suspension 4.9103
The parts easy to install and lined up exactly.
5 out of 5 - Very good
Jerry Bradbury - . Energy Suspension 4.9103
Very good product, have held up very well, still in like new condition.
5 out of 5 - Review 2 Years Later
Laurence McCalley - . Energy Suspension 4.9103
Fit perfect, fast shipping, great price.
5 out of 5 - Easy install
Don - . Energy Suspension 4.9103
Perfect fit. Nice to have new hardware so as not to fiddle w the old rusty stuff. My old bumpers were gone (literally) and this changed the ride, notably. I have now replaced shocks because I was bottoming out on these. There is not much travel on my excursion. I suspect the long leaf springs may be sagging with age. Easy replacement.
5 out of 5 - Nice
Joe armbruster - . Energy Suspension 4.9103
Works fine. Was a bit hard initially but are now working good.
5 out of 5 - Review 1 Year Later
JetCarrier 68538 - . Energy Suspension 4.9103
My front axle bump stops were gone - only the bracket was left. These were different than stock - much more durable materials and the cost is lower than factory as well. They work very well - no more axle and teeth rattling clanks on dirt roads and speed bumps. Installation is easy. If your axle has hit the bolts, you will have to file the heads so you can get a socket on them for removal. The factory upper frame nut has a leg on it to keep the nut from spinning - so a shot of PB Blaster is all you need once you have the socket on the nut. The new hardware does need a hold-back, so have deep well socket ready. Very good engineering and manufacturing. Very well designed and durable product. Highly recommended.
5 out of 5 - Better than factory
Karl J. Delooff - . Energy Suspension 4.9103
The OEM bump stops for the 02 excursion have been discontinued by Ford. There is a surplus laying around and they are way too expensive. These are a tad shorter but bolt right up. No drilling or modification. A direct replacement.
5 out of 5 - Perfect Fit
Jay - . Energy Suspension 4.9103
We bought these for a 2002 Ford Excursion 4x4 with a 7.3 diesel. Ford could not even come up with anything they thought would work. We ordered these and the holes lined right up with the originals and they were easy to install. So far we have been very pleased with them.
5 out of 5 - Very Good
Mitzi S. Linder - . Energy Suspension 4.9103
Should do a better job of marketing them. I would have bought these for my Excursion last year but never found them....maybe a new product? There is another bump stop that comes up for the excursion that is half the price, but not a direct bolt on. I found both of these this year and was not completely sure I was buying the correct part because lots of places that sell Energy Suspension parts do not show this part number. Ended up being exactly what I wanted, direct bolt on, no monkeying around with modifying anything and should last much longer in this application.
5 out of 5 - excellent
Mike Haug - . Energy Suspension 4.9103

Product Reviews for Energy Suspension Front Bump Stops

Five stars.
5 out of 5 - Great
Andres Resendis Aguilera - . Energy Suspension 2.9101_front
The fit was good, it would be great to see more colors available.
5 out of 5 - Well Made
Tim Barnes - . Energy Suspension 2.9101_front
Excellent part.
5 out of 5 - Really nice
Hugo salgado - . Energy Suspension 8.9103
Fit and price are good. They are a real bugger to get in, dish soap helps a lot.
5 out of 5 - Good product
Kevin Teesdale - . Energy Suspension 2.9101_front
Very quality part. Attractive and easy to install.
5 out of 5
Seth Engle - . Energy Suspension 3.9102
A little confusing to do with washers , but installed very easy, no instructions.
4 out of 5 - ok , looks different than stock .
john furino - . Energy Suspension 8.9103
They were just what I was looking for although they were a bit too big for my application on an 87 pathfinder. They could be a tiny bit smaller but they dont interfere with anything the way they are so Im leaving them.
5 out of 5 - Perfect fit although large in diameter
Roland Cottle II - . Energy Suspension 9.9102_upper
These lower A arm bump stops are well made, look great, and easy to install.
5 out of 5 - Well made, good looks
John David Rubrecht - . Energy Suspension 9.9154_lower
Fit and price are good. They are a real bugger to get in, dish soap helps a lot.
5 out of 5 - Good product
Kevin Teesdale - . Energy Suspension 2.9101_front
Look good and fit good.
5 out of 5 - Fit good and when in easy
Ben Voight - . Energy Suspension 5.9105

Click on the image and drag left or right to rotate.