Torsion Bar Dust Boots - Plymouth Roadrunner - 5.13101

  • 5.13101 360image 1
  • 5.13101 Torsion Bar Dust Boots
  • 5.13101 Torsion Bar Dust Boots
  • 5.13101 Torsion Bar Dust Boots
  • 5.13101 Torsion Bar Dust Boots
  • 5.13101 Torsion Bar Dust Boots
  • 5.13101 360image large 1

Torsion Bar Dust Boots

Manufacturer: Energy Suspension
Part Number: 5.13101

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $9.46

check_box In Stock check_box Ships Immediately


  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Cross Reference from 5.13101 to 41701
Prothane 41701
Polyurethane.
Price: $5.77
Warranty: Lifetime Warranty

question_answer Ask us a Question

FitmentTorsion Bar Dust Boots 5.13101 fits these vehicles:
Details

Torsion Bar Dust Boots - Plymouth Roadrunner - 5.13101

Pin Opening Diameter Base Opening Diameter Height of Boot Piece Number
21.5mm (0.845 inch) 42.75mm (1.685 inch) 55.9mm (2.2 inch) 13022
Here is our complete list of universal dust boots.

Energy Suspension Polyurethane Universal Dust Boots

Importance of Dust Boots

Many of you are finding out that the rubber boot on your ball joint or tie rod has rotted away or has split. These boots are extremely important for the suspension of your vehicle. Fortunately, Energy Suspension makes Universal Dust boots that will fit most vehicles. These dust boots are made of polyurethane and are far more durable than rubber. This will seal your boot to retain the grease in the joint, as well as protecting the joint from dirt, sand, water, and snow.

Energy Suspension Universal Dust Boots
Energy Suspension Universal Dust Boots

How to get your measurements

In order to select the proper boot, you will first need to grab a few measurements. The best way to do this is with a set of digital calipers. You will need to measure the diameter of the base where the boot will sit, the diameter of the shaft (also called the Pin Opening Diameter) and the height of the boot. Once you have gotten to your tie rod end measure these three spots. Be sure to be as exact as possible and to write down your measurements. If you have any trouble getting these measurements, give our customer service team at DST a call.

It is important to note that you do not want to choose a boot that is bigger than your measurements. You want to choose a boot that is just slightly smaller than the measurements you obtained. The elasticity of the polyurethane will allow the hole to stretch and grip the joint tightly. If you choose a boot that is too large there will be a gap which lets in debris.

Now that you have these measurements, you can verify that this is the boot that you need. If you find that your measurements do not match this boot, go to our Universal Dust Boot page to match a part to your measurements.

Choose your design

Energy Suspension offers an alternative to the traditional round bushing. There is an octagon shaped dust boot available as an option. The octagonal boots have the same specifications and perform the exact thing. They just offer a more unique look.

Energy Suspension Universal Dust Boots
Energy Suspension 5.13101

Product Reviews for Torsion Bar Dust Boots - Plymouth Roadrunner - 5.13101

5 Star (11)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 5.13101

5 out of 5 based on 11 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Review 1 Year Later "

Good workout getting them over the end of the torsion bars but they work and look great once you snap them into place.

verified_user Verified Buyer - - . Energy Suspension 5.13101 - 5 out of 5
T
verified_user

starstarstarstarstar" Well made product "

Well made product. Not as easy to install, but when I got them on, they fit well and seem to be holding.

verified_user Verified Buyer - - . Energy Suspension 5.13101 - 5 out of 5
J
verified_user

starstarstarstarstar" Review 1 Year Later "

Good workout getting them over the end of the torsion bars but they work and look great once you snap them into place.

verified_user Verified Buyer - - . Energy Suspension 5.13101 - 5 out of 5
M
verified_user

starstarstarstarstar" Review 2 Years Later "

The parts were used for a restoration project that is still in progress. As far as I know the parts are working as they should.

verified_user Verified Buyer - - . Energy Suspension 5.13101 - 5 out of 5

Fitment for 5.13101

compare_arrows Compare with Similar Parts


This Part
5.13101 compare
$9.46
Prothane
Prothane compare
$5.77
($3.69) cheaper