unarchive In The Box of 5.3139 keyboard_arrow_down
- 4 of 3400 - Front Lower Control Arm Bushings
- 4 of 3399 - Rear Lower Control Arm Bushings
- 4 of 3005 - Upper Control Arm Bushings
- 4 of 15.02.06.39 - Upper Metal Shell
- 2 of 15.10.443.39 - Metal Sleeves - .813" x .563" x 3.00"
- 2 of 15.10.453.39 - Metal Sleeves - .750" x .480" x 3.00"
- 4 of 15.10.609.39 - Metal Sleeves - .813" x .625" x 1.790"
- 4 of 9.11101 - Grease Container
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 5.3139 | 4WD Dakota | Front Control Arm Bushing Replacement Kit
- 5 Star (26)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 5.3139
starstarstarstarstar" Quality parts. Recommend. "
If you plan to keep your control arms, these will work really well. They are built properly and fit snugly. Working with suspension.com was easy, and they were more than happy to help when I had questions.
verified_user Verified Buyer - Joe McAuley - . Energy Suspension 5.3139 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
The fit and quality is good. No problems to note so far.
verified_user Verified Buyer - Darin Johnson - . Energy Suspension 5.3139 - 5 out of 5starstarstarstarstar" Very impressed "
Very easy to install, with a little help a novice can install these with instructions and the right tools. Will definitely be a return customer!!!
verified_user Verified Buyer - Scott Shoemaker - . Energy Suspension 5.3139 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
I havent had a problem yet. I did tack weld them in a couple spots but other than that no trouble. I would buy them again. Now they need to make these for the rear leaf and the rear sway bars
verified_user Verified Buyer - Tim Robertson - . Energy Suspension 5.3139 - 5 out of 5