unarchive In The Box of 7.3105 keyboard_arrow_down
- 8 - 3059 - Rear Lower Control Arm Bushings
- 4 - 15.10.71.39 (.750 x .535 x 2.520)
- 1 - 9.11102 - 10 Grams Grease Package
- 1 - 17019 - Instructions for Control Arm Sets
add_shopping_cart Suggested Parts 2keyboard_arrow_down
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
8 ounce tub of High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
HyperFlex Control Arm Bushings
A control arm bushing plays a vital role in a suspension. Replace that faulty O.E. rubber bushing with an Energy Suspension Hyperflex control arm bushing. These polyurethane bushings provide the longevity and performance needed to maximize a suspension's efficiency. Energy Suspension's Hyperflex polyurethane is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing but gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.
The Faulty O.E.
As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.
Be sure to use Formula 5
A control arm bushing rotates a lot against the metal shell, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 7.3105 | Datsun 610 | Rear Control Arm Bushing Replacement Kit
- 5 Star (4)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 7.3105
starstarstarstarstar" Review 2 Years Later "
I purchased the red polys for my Z. Installation was challenging because of the nature of the Z itself, and not because of the product. They fit very snugly and are still pliant and beefy two years later. I am hard on the suspension components when I drive, as I believe less than 1G in the corners is for sissies ;-) The suspension is still just as tight as it was the day I installed them. I am very pleased and impressed with this brand and will purchase them again once they wear out
verified_user Verified Buyer - Kate Somerville - . Energy Suspension 7.3105 - 5 out of 5starstarstarstarstar" Review 2 Years Later "
Great fit, great parts.
verified_user Verified Buyer - Kevin Ryan - . Energy Suspension 7.3105 - 5 out of 5starstarstarstarstar" Decent part "
all went well except for the inner diameter of the metal insert was too small. I was able to ream them out to fit my control arm bolts. I believe I only had to enlarge the hole by maybe .010- .015" Not a big deal, fortunately I have access to some good machine tools. Otherwise there was plenty of assembly lube and the product is performing well.
verified_user Verified Buyer - Dennis Little - . Energy Suspension 7.3105 - 5 out of 5starstarstarstarstar" easy "
Easy to install, look good.
verified_user Verified Buyer - jesse austin - . Energy Suspension 7.3105 - 5 out of 5