• kc09131bk Front and Rear Suspension Lift - 2 Inch

Front and Rear Suspension Lift - 2 Inch

Manufacturer: Daystar
Part Number: kc09131bk
Rating 36 Reviews

Purchase


Quantity:
Price: $219.99

Free Shipping! In Stock Ships Immediately


Details

Front and Rear Lift Kit | Ram 2500 94-10 4wd | Daystar

Fits Dana 70 rear axle with top-mount overload springs
FitmentFront and Rear Suspension Lift - 2 Inch kc09131bk fits these vehicles:
  • daystar warranty badge

    The Daystar GoEverywhere Lifetime Limited Warranty means Daystar stands behind their product 100% and if you have a problem with any of their products we will replace it, free of charge, but we doubt that's going to happen.

    Since Daystar experienced less than 1.5% warranty claims in 2016 it's extremely rare that we encounter a customer who needs to replace a part. If you do manage to find a defective Daystar part, send us some pictures and we will ship you a new part.


Daystar Lift Kits

Lift kits are designed, not surprisingly, to raise your vehicle further away from the ground. Not to be confused with leveling kits, lift kits actually raise the height of your vehicle on all four corners as opposed to just the front end. Another difference is the amount of actual lift. While leveling kits usually raise the front end up to two inches, lift kits can raise all four corners anywhere from four to ten inches, and even higher if you use custom kits. Offroad performance and style are the two main reasons you may use a lift kit. Lifting your vehicle allows for the use of larger tires, making those trails and rocks easier to climb over. Something to keep in mind; lift kits adjust multiple aspects of your suspension system, so getting your vehicle inspected and re-aligned after you install a lift kit is always recommended. While each lift kit varies from vehicle to vehicle, you can be sure that Daystar's lift kits include everything you need to raise your vehicle's ride height. Plus, Daystar covers all of their lift kits with a lifetime warranty handled in-house here at DST.

Daystar Box

Product Reviews for Daystar Lift Kit

Achieves goal of lifting the vehicle with minimal affects on factory suspension. Unlike many aftermarket lifts, factory ride and suspension performance is not compromised. Additional benefit besides tire and frame clearance is actual increase in ground clearance at front differential! We installed this lift at home, but we used a different procedure to remove the front struts-check Youtube for better procedures than Daystar uses. Get a good alignment shop afterwards, it is worth the money to have it done right. Excellent kit, vehicle ends up close to level when completed.
5 out of 5 - Good kit
Scott Alan Burkhardt - . Daystar kt09134bk
Structurally these parts have been no issue. I replaced shocks and struts while I was at it but I have to say Ive never had anything rattle so much. The least little bump and it sounds like the whole front end is falling out. Now the left rear is rattling. God forbid I hit a real chuck-hole. Ive had them checked repeatedly at Kauffman Tire, Goodyear, so-on and they all say nothing is loose. They say this brand is known to rattle. Is that true?? How annoying. Im ready to take them out and toss them as far as I can. I stay after this car and honestly it sounds like an Ill cared for rattle trap. Its embarrassing. Editor"s note: I contacted DayStar about this issue. Their tech support team told me that the strut plates were not tightened properly or the strut plate was not installed right.
5 out of 5 - Review 2 Years Later
Thomas Rhodes - . Daystar kj09132bk
Achieves goal of lifting the vehicle with minimal affects on factory suspension. Unlike many aftermarket lifts, factory ride and suspension performance is not compromised. Additional benefit besides tire and frame clearance is actual increase in ground clearance at front differential! We installed this lift at home, but we used a different procedure to remove the front struts-check Youtube for better procedures than Daystar uses. Get a good alignment shop afterwards, it is worth the money to have it done right. Excellent kit, vehicle ends up close to level when completed.
5 out of 5 - Good kit
Scott Alan Burkhardt - . Daystar kt09134bk
Achieves goal of lifting the vehicle with minimal affects on factory suspension. Unlike many aftermarket lifts, factory ride and suspension performance is not compromised. Additional benefit besides tire and frame clearance is actual increase in ground clearance at front differential! We installed this lift at home, but we used a different procedure to remove the front struts-check Youtube for better procedures than Daystar uses. Get a good alignment shop afterwards, it is worth the money to have it done right. Excellent kit, vehicle ends up close to level when completed.
5 out of 5 - Good kit
Scott Alan Burkhardt - . Daystar kt09134bk
Looks great on my 2015 4Runner Limited.
5 out of 5
Christie Chastain - . Daystar kt09134bk
Installed easy, produced what I wanted in lift. Good product.
5 out of 5 - Review 1 Year Later
Michael Maxwell - . Daystar kc09106bk
Install instructions should have identified the need for rear coil spring compressors.\nAwesome product, for superior to Rough Countrys products. Editors Note: Yes you may need to use a spring compressor. But, depending on the rear suspension design if you would need to use a spring compressor to remove the springs.
5 out of 5 - best product for the money
Barry K Burns - . Daystar kt09110bk
I am very satisfied with this product. The directions were very straightforward in the install went smoothly. But I was also Most Impressed with the customer service of both Daystar and Diverse Suspension Technologies. DST emailed and called me with concerns about my order before it was processed. And post installation I had some questions about alignment and both DST and Daystar were Awesome & Very helpful. I would definitely deal with both companies again!
5 out of 5 - Really Great Product Well Worth The Investment. LOVE IT !!!
John Matisa - . Daystar kj09168bk
Installed easy, produced what I wanted in lift. Good product.
5 out of 5 - Review 1 Year Later
Michael Maxwell - . Daystar kc09106bk
I have about $1500 into this modification and I still have the vibration in my truck. My truck ran perfectly fine before I did the mod but the Ford dealer tells me that I am getting the vibration because of the pinion angle to the carrier. I would like a total refund of my money. Editors Note: It is very important to follow the instructions supplied. The lift blocks are marked front and rear. They are built at an angle and if not installed correctly it will cause a vibration in the drive line. Also the U-Bolts must be torqued and rechecked after 500 miles of driving.
1 out of 5 - Well my truck has a vibration from take off and I replaced all the ujoints and carrier bearing to try and take care of the problem and its still there
steven thomas hart - . Daystar kf09051bk

Fitment for kc09131bk