Rear Coil Springs - Chevrolet Chevelle - moog-6197

  • moog-6197 Rear Coil Springs - Pair

Rear Coil Springs - Pair

Manufacturer: MOOG
Part Number: moog-6197
Price: $98.51
Availability: Out Of Stock
Out of Stock

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentRear Coil Springs - Pair moog-6197 fits these vehicles:

Rear Coil Springs - Chevrolet Chevelle - moog-6197

Moog's Coil Springs

Designed to be more than OE replacements, Moog's coil springs come with a variety of shapes and ends. This selection, combined with Moog's lifetime warranty handled right here at DST, lends security to whichever choice you might make. While they are certainly higher quality than the OE springs, each of Moog's coil springs were designed to still have the same spring rate. Having the same spring rate allows for an easier install and a more accurate restoration for your vehicle's ride.

End Type

Coil Springs have three types of ends: Square, Tangential and Pigtail. It is important that you select a coil spring that matches BOTH your end types, otherwise the coil spring won't fit. Your OE coil spring could have the same type ends, or a combination of both.

Moog Universal Coil Springs Squared

Type 1: Squared

With a Squared end, the final coil is bent back to touch the coil before it. The easiest way to know if you have a squared end is to stand the coil spring straight up. A squared end will let the spring sit flat on the ground and stay standing.

Type 2: Tangential

A Tangential end looks like it would just keep on going forever if the spring continued. The last coil is not bent back and it is not the pigtail (see below). Instead, the tangential coil spring looks as though a normal coil was just cut, otherwise, it would have kept winding on forever. If you tried to stand it up straight, it would fall.

Moog Universal Coil Springs Squared
Moog Universal Coil Springs Squared

Type 3: Pigtail

The Pigtail is probably the easiest to identify. Its defining characteristic is the pig tail shape at the end. The final coil is squared off, but is a much smaller diameter than the rest of the spring.

Spring Type

Moog offers two types of springs for a universal fitment: Constant Rate and Variable Rate.

Constant Rate

Moog Constant Rate coil springs return your vehicle to the original specifications. The rate at which the spring compresses and rebounds remains constant regardless of the amount of load on the spring. These coil springs are heat treated, have a weather resistant finish and use a urethane protective tube.

Moog Universal Coil Springs Bar Diameter
Moog Universal Coil Springs Bar Diameter

Variable Rate

Moog Variable Rate coil springs can be used as an original replacement or an upgrade to carry heavier loads. The resistance changes as the spring compresses, becoming progressively stiffer as the load on the springs increase. The springs include a "comfort range" with tightly spaced coils to give a smooth ride, and include a "load range" with widely spaced coils to minimize deflection and maintain chassis height when the vehicle load increases.

MOOG moog-6197

Product Reviews for Rear Coil Springs - Chevrolet Chevelle - moog-6197

5 Star (1)
4 Star (0)
3 Star (0)
2 Star (0)
1 Star (0)

MOOG moog-6197

5 out of 5 based on 1 user reviews. Write a Review


starstarstarstarstar" good springs "

The job went well, no problems. Propped shocks and supported rear end with jack and replaced springs. A 3 hour job

verified_user Verified Buyer - - . MOOG moog-6197 - 5 out of 5
Fitment for moog-6197
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
ChevroletChevelle1966-1965Rear Quantity 1 3.2L L6 194cid
ChevroletChevelle1966-1965Rear Quantity 1 4.6L V8 283cid
ChevroletChevelle1966-1964Rear Quantity 1 3.2L L6 3180cc/194cid
ChevroletChevelle1966-1964Rear Quantity 1 3.8L L6 3769cc/230cid
ChevroletChevelle1965-1964Rear Quantity 1 4.6L V8 4638cc/283cid
ChevroletChevelle1965Rear Quantity 1 3.8L L6 230cid
ChevroletChevelle1964Rear Quantity 1 5.3L V8 5358cc/327cid
ChevroletEl Camino1964Rear Quantity 1 3.2L L6 3180cc/194cid
ChevroletEl Camino1964Rear Quantity 1 3.8L L6 3769cc/230cid
ChevroletEl Camino1964Rear Quantity 1 4.6L V8 4638cc/283cid
ChevroletMalibu1966-1964Rear Quantity 1 4.6L V8 4638cc/283cid
ChevroletMalibu1965-1964Rear Quantity 1 3.2L L6 3180cc/194cid
ChevroletMalibu1965-1964Rear Quantity 1 3.8L L6 3769cc/230cid
ChevroletMalibu1965-1964Rear Quantity 1 5.3L V8 5358cc/327cid

question_answer Customer Questions and Answers

Will the 6197 Moog coil springs fit my 1965 Chevy Malibu 2-door hardtop?
Yes, part number moog-6197 will fit on the rear of your 1965 Chevrolet Malibu.

Can you give me specs on these part #trw 6204 and trw 6197
6204: ID: 3.63 Bar Diameter: 0.60 Spring Rate-lbs per inch: 265.00 Load lbs: 2015.00 Free Height: 18.61 Installed Height: 11.00 Constant rate 6197: ID: 5.52 Bar Diameter: 0.56 Spring Rate - lbs per inch: 138.00 Load - lbs: 878.00 Free Height: 15.06 Installed Height: 8.50 Constant Rate ...see more