• moog-es2812l Front Outer Tie Rod End - Driver Side

Front Outer Tie Rod End - Driver Side

Manufacturer: MOOG
Part Number: moog-es2812l
Rating 227 Reviews

Purchase


Quantity:
Price: $44.96

In Stock Ships Immediately


Driver Tie Rod End | Sterling 825 1987-1988

FitmentFront Outer Tie Rod End - Driver Side moog-es2812l fits these vehicles:
  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.


Moog Tie Rods

Connecting the Driver to the Vehicle

Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterwards.

Moog Tie Rod Box

Moog Tie Rod

Designed for Strength, Durability, and Longevity

Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.

Product Reviews for MOOG Front Outer Tie Rod End

I ordered this part for my 1st gen Cummins and fit perfectly. Shipping was fast. Very satisfied.
5 out of 5 - Very good quality part
Ivane khmaladze - . MOOG moog-es3122r
The best you can buy.
5 out of 5 - High quality part
William Lee - . MOOG moog-es3009r
The best you can buy.
5 out of 5 - High quality part
William Lee - . MOOG moog-ds1071
Was a good fit. Was strong and good material! Will purchase again.
5 out of 5 - Review 1 Year Later
Joseph harris - . MOOG moog-ds300008
The parts are working perfectly.
5 out of 5 - Review 1 Year Later
Daniel Williams - . MOOG moog-es3366t
Perfect fit on our BLH wheel loader.
5 out of 5 - outstanding
Harold W Bonham - . MOOG moog-es2062r
They are fine, though we have not driven over 5000 miles
5 out of 5 - Review 2 Years Later
Patrick Allen - . MOOG moog-es445rl
Love the tie rod ends no complaints Moog never ceases to amaze me. No tips.
5 out of 5 - Review 2 Years Later
Grant Koebke - . MOOG moog-es2333
I love Moog parts and they hold up great yet I believe there is an issue with the boot. Ive had to replace the tie rod ends twice already due to the boot tearing causing all the grease to leak out. Not Moogs fault just a fault in the integrity of the boot. Editors Note: Most Moog grease dust boots fail because of over filling with grease or using a pneumatic grease gun. On most Moog dust boots they have a grease relief made into them. Even with the grease relief they will split if it is not clear. Another problem is debris or off road driving.
5 out of 5 - Review 2 Years Later
Devon L Krause - . MOOG moog-es80574
Hello,\nI have been told by two shops that all of my tie rod ends and ball joints are shot. I dont know if its a product defect or a maintenance issue or what but I am not in any way dissatisfied with your product or service. I will actually be ordering a new set soon. If you have any insight I would certainly welcome it. Editors Note: Contacted the customer about his concerns. He did not want to pursue the warranty at this time. Diverse Suspension Technologies stands behind the Moog limited lifetime warranty. Our company does not put a 30-90 day limit and we handle the warranty in house. We will not have the customer contact Moog to get the warranty honored. Other companies handle the warranty in this manner.
5 out of 5 - Review 2 Years Later
Stephen Schroetke - . MOOG moog-es3466