moog-k150376 | Rear Coil Spring Isolator Pads - Chevrolet Chevelle

  • moog-k150376 360image 1
  • moog-k150376 Rear Coil Spring Adjuster
  • moog-k150376 Rear Coil Spring Adjuster
  • moog-k150376 Rear Coil Spring Adjuster
  • moog-k150376 Rear Coil Spring Adjuster
  • moog-k150376 Rear Coil Spring Adjuster
  • moog-k150376 360image large 1

Rear Coil Spring Adjuster

Manufacturer: MOOG
Part Number: moog-k150376
Price: $13.81

check_box In Stock check_box Ships Immediately

  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.


    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentRear Coil Spring Adjuster moog-k150376 fits these vehicles:

moog-k150376 | Rear Coil Spring Isolator Pads - Chevrolet Chevelle

Minimum Adjustment; 2"
.63" Diameter Coil Spring

Moog Coil Spring Isolators

Primarily designed to eliminate the vibrations and noise created by driving over uneven surfaces, coil springs come standard on almost every vehicle today. Another key component to this system is the coil spring isolators. While the coil springs take the edge off of the most intense bumps and vibrations, coil spring isolators are made to smooth out what's left. Additionally, coil spring isolators are used to protect the control arms from impacting the coil spring. OE isolators are usually made out of rubber. While rubber is good at absorbing vibrations, it doesn't last long against the constantly shifting weight and pressure.

Moog Bushing Box
Moog OE coil spring

OEM Distorts, Moog Restores

Moog's coil spring isolators are made of high-quality rubber. These isolators will restore your coil spring operation to like new status with the same comfort and isolation as the OE. The OE isolator can crush or warp until the coil spring is not properly aligned. Look to Moog when restoring your coil spring setup.

Fitment for moog-k150376

question_answer Customer Questions and Answers

What is the purpose of these adjusters: moog-k150376 coil spring stabilizer, I have hotchkis lowering springs front and back will it stiffen things up for the better. Thanks
Coil Springs are prone to rubbing, and proper alignment is impossible if the coil springs aren''''t operating at the original design height. A coil spring stabilizer ensures your coil springs stays at their original design height. Two coil spring spa acers are recommended per spring, and be sure to install from the inside of the coil spring. Due to the curvature of some springs, two different sizes may be required. When measuring your spring, one space should be skipped between coils. ...see more