papls408 | 5in Lift Kit | 2005-2016 Nissan Frontier

 

Lift Kit - 5 Inch - Gas Models

Manufacturer: Performance Accessories
Part Number: papls408
Rating star_borderstar_borderstar_borderstar_borderstar_border | 1 Customer Questions
Price: $850.00

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • NL221PA
  • 2 Qty - Spacer (lower)
  • 2 Qty - Spacer (upper)
  • 6 Qty - Bolt (M10-1.50 x 50)
  • 6 Qty - Nut (M10-1.50 Stover)

  • Gap Guard
  • 1 Qty - Driver front gap guard (1)
  • 1 Qty - Passenger front gap guard (2)
  • 1 Qty - Driver rear gap guard (3)
  • 1 Qty - Passenger rear gap guard (4)
  • 1 Qty - Package plastic clip fastener

  • 40083
  • 10Qty - Block (3in x 2in)
  • 4 Qty - Block (3in x 3in)
  • 10Qty - Bolt (1/2in x 1-1/2in)
  • 7 Qty - Bolt (1/4in x 1in)
  • 6 Qty - Bolt (10mm x 120mm)
  • 8 Qty - Bolt (12mm x 180mm)
  • 2 Qty - Bolt (12mm x 30mm)
  • 1 Qty - Bolt (3/8in x 1-1/4in)
  • 6 Qty - Bolt (5/16in x 1in)
  • 1 Qty - Bolt (6mm x 30mm)
  • 1 Qty - Bracket (2in step w/ stud)
  • 3 Qty - Bracket (2in w/ stud)
  • 1 Qty - Bracket (2in Z-shaped)
  • 2 Qty - Bracket (2-1/2in C-shaped)
  • 2 Qty - Bracket (3in w/ stud)
  • 1 Qty - Bracket (front bumper, driver)
  • 1 Qty - Bracket (front bumper, passenger)
  • 1 Qty - Bracket (radiator, driver)
  • 1 Qty - Bracket (radiator, passenger)
  • 1 Qty - Bracket (rear bumper, driver)
  • 1 Qty - Bracket (rear bumper, passenger)
  • 2 Qty - Bracket (rear bumper, support)
  • 2 Qty - Clamp (#10 hose)
  • 2 Qty - Clamp (#20 hose)
  • 1 Qty - Extension (fuel filler)
  • 1 Qty - Extension (shift, 5/8in x 3in)
  • 1 Qty - Extension (steering)
  • 1 Qty - Hose (1in x 3in)
  • 1 Qty - Hose (5/8in x 14in)
  • 1 Qty - Loctite(6ml bottle)
  • 14Qty - Nut (1/2in Nylock)
  • 12Qty - Nut (1/4in Nylock)
  • 1 Qty - Spacer (.250")
  • 6 Qty - Spacer (2in x 3in x 1in)
  • 4 Qty - Spacer (2in x 3in x 2in)
  • 6 Qty - Tie
  • 6 Qty - U-nut (5/16in)
  • 6 Qty - Washer (1/2in SAE)
  • 24Qty - Washer (1/2in USS)
  • 17Qty - Washer (1/4in SAE)

  • 6423 Gap Guard
  • 8 Qty - Bolt (1/4in x 1in)
  • 2 Qty - Bracket (L-shaped)
  • 50Qty - Clip (push)
  • 1 Qty - Gap guard (front driver)
  • 1 Qty - Gap guard (front passenger)
  • 1 Qty - Gap guard (rear driver)
  • 1 Qty - Gap guard (rear passenger)
  • 8 Qty - Nut (1/4in Nylock)
  • 2 Qty - Subframe
  • 25Qty - Washer (1/4in SAE)
  • Lifetime Warranty - All of Performance Accessories Parts are backed by a Lifetime Warranty. They note that: It is unlikely that you will experience a problem with a Performance Accessories product, but if you do, we will replace the part free of charge.

question_answer Ask us a Question

FitmentLift Kit - 5 Inch - Gas Models papls408 fits these vehicles:
Details

papls408 | 5in Lift Kit | 2005-2016 Nissan Frontier

NISSAN FRONTIER GAS 2WD and 4WD
Features
  • Provides 5-inches of lift without modifying existing suspension components
  • Allows use of up to 33-inch diameter tires for improved ground clearance
  • Allows use of factory wheels after installation for convenience
  • DOES NOT alter the OEM suspension geometry or factory Stability parameters
  • Maintains the factory smooth ride
  • Fits 2WD & 4WD models with gasoline engine.
Additional Information:
  • Two high quality CNC machined billet aluminum coil spring spacers
  • Two high quality front urethane coil spring spacers
  • Fiberglass reinforced nylon body blocks
  • CNC machined and zinc plated steering extension
  • Laser cut and powder coated relocation brackets
  • Laser cut and zinc plated fittings and brackets
  • High strength hardware included
  • Includes urethane Gap Guard wheel well extensions
  • Made in the U.S.A.

Performance Accessories PLS408 Premium Lift System raises the vehicle 5-inches, by combining the companys high-quality body-lift and leveling kit, allowing the vehicle to run up to a 33-inch diameter tire. The kit includes two high quality urethane coil compression spacers that sit on the coil springs for increased spring load and two machined billet aluminum spacers that sit on top of the strut mount plate, high pressure fiberglass reinforced nylon lift blocks, 3/16 inch thick laser cut and powder coated front and rear bumper relocation brackets, a CNC machined and zinc plated steering extension, high strength hardware, extension brackets, and urethane wheel-well extensions (Gap Guards) that conceal any gaps between the body and frame. This system can be installed in 10 to 12 hours and comes complete with everything necessary for installation.


Note Depending on the vehicle configuration (automatic or manual transmission, 2WD or 4WD, cab length, bed length, etc.), some parts may not be used

American Made, Precision Engineered Lifts

Performance Accessories suspension and body lift kits are American engineered and manufactured lifts that are designed to give the desired height without throwing off suspension geometry and center of gravity.

Most people lift their trucks or SUVs to increase ride height and make room for bigger tires or wheels, but a poorly designed lift kit can negatively affect how your ride handles and the lifespan of your suspension, steering, and even your tires. Performance Accessories designs their body and suspension lift kits to keep your ride smooth and your components and tires from wearing prematurely. In fact, these kits have so little affect on the OE suspension and electronic stability control that the OE warranty will still be valid.

performance accessories body lift kit

Balancing Lift and Ride Quality

performance accessories suspension lift kit

One of the best ways to lift a vehicle is combining a body lift and a small suspension lift or leveling kit. Performance Accessories sells combination kits that include the correct body and suspension lifts to give you the balance of the maximum height and the best ride possible.

Performance Accessories lift kits are made of durable materials and include all of the hardware and bracketry plus detailed instructions which allow most kits to be installed in the average garage. These kits also carry a limited lifetime warranty which our helpful customer service folks can handle for you when you buy from DST. If you need tire space and ride height increase, but want to keep your vehicle's handling and ride characteristics the same, then Performance Accessories is a great option.

question_answer Customer Questions and Answers

Question:
What comes in the Performance Accessories body lift kit part number PAPLS408?
Answer:
Performance Accessories body lift kit part number PAPLS408 comes with fourteen nylon body blocks, two aluminum coil spring spacers, two front urethane coil spring spacers. and the hardware, of the fittings, the brackets, the relocation brackets, the urethane Gap Guards, and the steering extensions. ...see more
add Ask a Question