unarchive In The Box of dhw011 keyboard_arrow_down
- Radiator Core Support
- Mount Bolt Qty 2
- Torque Lock Nut Qty 2
- Front Cab to Frame Mount
- Mount Bolt Qty 2
- Torque Lock Nut Qty 2
- Mid Cab to Frame Mount
- Mount Bolt Qty 2
- Torque Lock Nut Qty 2
- Rear Cab to Frame Mount
- Mount Bolt Qty 2
- Torque Lock Nut Qty 2
lock Warranty Information keyboard_arrow_down
WARRANTY:
DST carries a 5-Year Warranty.
DST warrants their parts to be free of defects in materials and/or workmanship during this timeframe as measured from the date of purchase.
If a DST part should fail due to materials or manufacturing defects while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Finding an entire hardware kit for your Bronco could be harder than it was to find all the parts you may already have! Luckily for you DST has the answer.
DST's DHW011
Restoring your Bronco?
Your old Ford Bronco has seen better days, hard work, rough roads, and rainy days to name just a few examples. After more than a decade of work, your Bronco clearly shows the wear. But you've taken it upon yourself to restore your Bronco back to its prime. So you do some searching, find a set of replacement body mounts and other suspension parts, and begin to work on your Bronco. Soon after you realize that the hardware used to keep all of those parts in place is dangerously corroded. Assuming it's even possible to re-use this old hardware, it's certainly not recommended. But finding an entire hardware kit for your Bronco could be harder than it was to find all the other parts you may need! Luckily for you, DST has the answer.
A Successful Combination!
This is DHW011, a hardware kit made specifically for your '80-'96 Ford Bronco. This kit includes two bolts, two shims, two lock nuts, and three pairs of washers for the radiator core support, two bolts, washers, and retainers for both the front and mid-front positions, two bolts, two washers, and four retainers for the mid-rear position, and two bolts and four retainers for the rear position. Replacing the dangerous corroded hardware with DHW011 is your safest choice. If you just replace the suspension bushings alone it might work for a while, but if the rusted hardware starts to give, you'll end up with a much more expensive repair down the road. If you're still searching for the right set of body mounts for your Bronco combine the DHW011 with Prothane's 6-107 body mount kit or Energy Suspension's 4.4109 to get everything you need to complete your Bronco's body to frame restoration!
Product Reviews for Body Mount Bushings Hardware - Ford Bronco - dhw011
- 5 Star (0)
-
-
- 0%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (1)
-
-
- 100%
-
- 1 Star (0)
-
-
- 0%
-
DST Parts dhw011
starstarstar_borderstar_borderstar_border" Not complete/Wrong Bolts "
Ordered this kit for a 1987 Bronco.\nAfter about the 8 week wait time (which I planned for) I was soon disappointed. The kit only comes with (4) top washer-bushings for the two rear most positions. Need (8) total top washer-bushings as OEM has it. These top pieces engage in the lower half with the nut to secure the bushings together. Not sure what they expect you to use, if anything, for these remaining locations. \n\nTo get worse, most of the bolts (6) were to long with not enough threads for nut to even get close to tight, this is NOT for a body lift. Luckily, these were normal 7/16-14 grade 8 bolts you can find at a hardware store, needed 3.5 inch length bolts for cab and bed positions. Didn’t try the front core support at this time. \n\nOverall, this was a big disappointment for how costly this kit was but can be improved if the company is willing. I would not recommend as the kits stands today.
verified_user Verified Buyer - Alex - . DST Parts dhw011 - 2 out of 5