11.5102 | Front sway bar-Endlink Bushings - 19 mm | Mazda Miata

  • 11.5102 360image 1
  • 11.5102 Front Sway Bar Bushings - 19mm (0.74 inch)
  • 11.5102 Front Sway Bar Bushings - 19mm (0.74 inch)
  • 11.5102 Front Sway Bar Bushings - 19mm (0.74 inch)
  • 11.5102 Front Sway Bar Bushings - 19mm (0.74 inch)
  • 11.5102 Front Sway Bar Bushings - 19mm (0.74 inch)
  • 11.5102 360image large 1

Front Sway Bar Bushings - 19mm (0.74 inch)

Manufacturer: Energy Suspension
Part Number: 11.5102

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade
Price: $35.17

check_box In Stock check_box Ships Immediately


  • 2 - 5042 - Sway Bar Bushings
  • 4 - 8062 -End Link Bushings
  • 4 - 15.10.202.39 - .625x.393x.940 INCH Center Sleeves
  • 2 - 15.08.02.39 - Sway Bar Brackets
  • 1 - 9.11102 - 10 Gram Tube of Formula 5 Prelube
  • 1 - 17086 - Instruction sheet
Suggested part for 11.5102: 11.5103
11.5103 Rear Sway Bar Bushings - 12.5mm (0.49 inch)
If your front sway bar bushings are worn out, chances are that your rear bushings are worn out as well. Replace them both at the same time while you're already under the car for the maximum increase in handling.

Suggested part for 11.5102: dll120
dll120 Front Sway Bar Lateral Locks - 19-20mm
DST Silver Color - Limited Lifetime Warranty

Suggested part for 11.5102: kll120
kll120 Sway Bar Lateral Locks - 19-20mm
Whiteline Gold Color Plated - 3 Year warranty

Suggested part for 11.5102: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

question_answer Ask us a Question

FitmentFront Sway Bar Bushings - 19mm (0.74 inch) 11.5102 fits these vehicles:
Details
Polyurethane Front Sway Bar Bushings
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular!

11.5102 | Front sway bar-Endlink Bushings - 19 mm | Mazda Miata

Only Fits 19mm Bar
Polyurethane Front Sway Bar Bushings
  • Your vehicle's sway bar system will work at its maximum efficiency!
  • Replaces that original, short lived and too-soft rubber.
  • Easy to install with basic tools.
  • Made of rugged Energy's HYPERFLEX performance polyurethane material and the hardware is heavy duty for lasting durability.
Footnotes

A split was incorporated into the side of each bushing, allowing you to just slip the bushings over the bar instead of having to slide it all the way into place. This also allows you to keep the sway bar on your Miata during the installation, saving you time and effort.

Energy Suspension 11.5102

Do a Barrel Roll!

You're speeding around in your Miata, just out for a spin, and spot a corner coming up. As you take the turn your Miata starts to lean, which you're used to. But the Miata keeps leaning until you feel like you're about to pull a Star Fox and do a barrel roll. While doing barrel rolls in video games can be fun, all of us here at DST agree that video games are where they should stay. This could be a sign of failed OE sway bar bushings. The OE bushings installed on your Miata are made of soft rubber, this rubber is prone to stretching itself out over time, cracking, and eventually rotting away. Once this happens your Miata's sway bar is left loose, not only does this render the sway bar worthless but it can potentially bang into other chassis parts and cause additional damage.

11.5102_one
11.5102_two

The. Miata. Is. In. The. Docking. Bay.

This is Energy Suspension's 11.5102, a set of 19mm front sway bar bushings. Crafted using Energy Suspension's HyperFlex polyurethane, these bushings are designed to be durable enough to withstand any stress your Miata can put on them. In addition, once again thanks to Energy Suspension's design, these bushings make your Miata's sway bar perform as if it was an even larger bar!

Gee, I've been saved by 11.5102. How swell.

The 11.5102 was also designed to be easy to install! A split was incorporated into the side of each bushing, allowing you to just slip the bushings over the bar instead of having to slide it all the way into place. This also allows you to keep the sway bar on your Miata during the installation, saving you time and effort. After you get the bushings on the sway bar all that's left is to tighten them down using the zinc-plated brackets included in the 11.5102, and don't worry, once you tighten down those brackets the split should disappear. Here at DST, we make sure to let everyone know it is crucial that you measure your sway bar before purchasing bushings for it. That way you can be sure you got the right size bushings. For more information on measuring your sway bar check out our How-To Video on our Universal Sway Bar Bushings Page!

11.5102_two
Energy Suspension 11.5102

Product Reviews for 11.5102 | Front sway bar-Endlink Bushings - 19 mm | Mazda Miata

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Energy Suspension 11.5102

5 out of 5 based on 1 user reviews. Write a Review

E
verified_user

starstarstarstarstar" Worked great "

Easy to install kit. I dont believe the end-link bushings are considered replaceable, so Mazda only sells replacement links. If you are willing to go through the effort of removing the old bushings, this is a great replacement and cheaper than going OEM. The new bushings pressed in relatively easily, and I noticed a lot less over-steer at the limit compared to my old worn out rubber bushings. The sway bar bushings fit the stock size bar on my 90 Miata. A grease fitting would be a nice addition, but I have'nt noticed any squeaking so far.

verified_user Verified Buyer - - . Energy Suspension 11.5102 - 5 out of 5