w23401g | Front Sway Bar Bushings - 26 mm | Chevrolet SS

  • w23401g 360image 1
  • w23401g Front Sway Bar Bushings - 26mm (1.02 inch) - Greaseless
  • w23401g Front Sway Bar Bushings - 26mm (1.02 inch) - Greaseless
  • w23401g Front Sway Bar Bushings - 26mm (1.02 inch) - Greaseless
  • w23401g Front Sway Bar Bushings - 26mm (1.02 inch) - Greaseless
  • w23401g Front Sway Bar Bushings - 26mm (1.02 inch) - Greaseless
  • w23401g 360image large 1

Front Sway Bar Bushings - 26mm (1.02 inch) - Greaseless

Manufacturer: Whiteline
Part Number: w23401g
Price: $18.44

check_box In Stock check_box Ships Immediately


Suggested part for w23401g: whiteline-lubricant
whiteline-lubricant EZE Grease Polyurethane Bushing Lubricant and Prelube - 3 Pack
Whiteline provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.

    WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
FitmentFront Sway Bar Bushings - 26mm (1.02 inch) - Greaseless w23401g fits these vehicles:

w23401g | Front Sway Bar Bushings - 26 mm | Chevrolet SS

Whiteline's Greaseless Sway Bar Bushings

Worn, faulty OE

Sway bars are designed to maximize tire-to-road contact while driving. But they can't accomplish this task on their own. Sway bar bushings secure your sway bar to the frame of your vehicle, both enhancing and maintaining the bar's performance. Unfortunately, most OE sway bar bushings are made of a soft rubber that's prone to cracking and wearing down over time. Once this happens, the bushings lose their grip on your sway bar, severely reducing it's effectiveness.

Faulty OE
Whiteline Bag

Durability, Performance, and Installation

Whiteline's synthetic elastomer sway bar bushings offer substantial improvements over the OE. Extremely resistant to physical wear and corrosion, these bushings are guaranteed to outlast the OE rubber. Additionally, the synthetic elastomer is much firmer than rubber, further improving your sway bar's performance. Designed to be an easy install, Whiteline's sway bar bushings have a split in one side that allows you to simply slip the bushing over the bar, instead of having to slide it all the way into place.

Greaseless Design and Unbeatable Coverage

Adding to both the ease of installation and performance of your sway bar, Whiteline's sway bar bushings incorporate a PTFE liner around the inside of the bushing. This liner completely removes the need for grease. Instead of dealing with the messy initial greasing, and the need for continuous re-application later on, the PTFE liner makes it a one-and-done job. If all of those features weren't enough, Whiteline covers all of their sway bar bushings with a lifetime warranty handled directly through DST.

Greaseless PTFE Liner
Whiteline w23401g

Product Reviews for w23401g | Front Sway Bar Bushings - 26 mm | Chevrolet SS

5 Star (0)
0%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (2)
100%
starstar_borderstar_borderstar_borderstar_border

Whiteline w23401g

1 out of 5 based on 2 user reviews. Write a Review

C
verified_user

starstar_borderstar_borderstar_borderstar_border" The Chevy dealer told me that these bushings absolutely, positively DO NOT fit my 2015 Chevy SS front sway bar. "

In July 2017, I noticed an annoying rattle coming from the underside of my 2015 Chevy SS. It was still under warranty so I took it into the dealer. I was advised that I needed a front sway bar, bushings and linkages. I didnt understand that because the car had only 18.6K mileage on it, I drive it like a grandma, but whatever. It took over three months to get the parts in. In the meantime, I googled "front sway bar bushings for a 2015 Chevy SS. and got a hit on these Whiteline bushings. I ordered them on a Friday and got them the next Monday. I contacted the dealer and, because of the delay in getting the GM parts in, they were willing to install these non-GM parts. You can imagine my disappointment when they called me to say that the bushings arent the correct ones. I ultimately contacted Whiteline and spoke with a Jesse to let him know. I have no doubt that these are great bushings, probably better than the OEM ones, but, in my application, they didnt work. And then, the week that I brought the car in, the GM parts arrived. Editors Note: Since there are no details why the bushing did not fit. Usually the issue is that the diameter of the bar was not checked before ordering. It is very important to measure your sway bar before ordering. \n\n

verified_user Verified Buyer - - . Whiteline w23401g - 1 out of 5
C
verified_user

starstar_borderstar_borderstar_borderstar_border" The Chevy dealer told me that these bushings absolutely, positively DO NOT fit my 2015 Chevy SS front sway bar. "

In July 2017, I noticed an annoying rattle coming from the underside of my 2015 Chevy SS. It was still under warranty so I took it into the dealer. I was advised that I needed a front sway bar, bushings and linkages. I didnt understand that because the car had only 18.6K mileage on it, I drive it like a grandma, but whatever. It took over three months to get the parts in. In the meantime, I googled "front sway bar bushings for a 2015 Chevy SS. and got a hit on these Whiteline bushings. I ordered them on a Friday and got them the next Monday. I contacted the dealer and, because of the delay in getting the GM parts in, they were willing to install these non-GM parts. You can imagine my disappointment when they called me to say that the bushings arent the correct ones. I ultimately contacted Whiteline and spoke with a Jesse to let him know. I have no doubt that these are great bushings, probably better than the OEM ones, but, in my application, they didnt work. And then, the week that I brought the car in, the GM parts arrived. Editors Note: Since there are no details why the bushing did not fit. Usually the issue is that the diameter of the bar was not checked before ordering. It is very important to measure your sway bar before ordering. \n\n

verified_user Verified Buyer - - . Whiteline w23401g - 1 out of 5
Fitment for w23401g
HOLDEN CAPRICE WM (8/2006-5/2013)
HOLDEN CAPRICE WN (6/2013-ON)
HOLDEN COMMODORE VE (8/2006-5/2013)
HOLDEN COMMODORE VF (6/2013-ON)
HOLDEN STATESMAN WM (8/2006-5/2013)
HSV CLUBSPORT E SERIES (8/2006-5/2013)
HSV GRANGE WM (8/2006-5/2013)
HSV GTS E SERIES (8/2006-5/2013)
HSV MALOO E SERIES (10/2007-5/2013)
HSV SENATOR E SERIES (8/2006-5/2013)
HSV W427 E SERIES (7/2008-9/2009)
PONTIAC G8 1ST GEN (12/2007-6/2009)
VAUXHALL VXR8 E SERIES (8/2006-5/2013)