Front Control Arm Bushings - Ford Probe - w51307

  • w51307 360image 1
  • w51307 Front Lower Control Arm Bushings - Inner Front Position *While Supplies Last*
  • w51307 Front Lower Control Arm Bushings - Inner Front Position *While Supplies Last*
  • w51307 Front Lower Control Arm Bushings - Inner Front Position *While Supplies Last*
  • w51307 Front Lower Control Arm Bushings - Inner Front Position *While Supplies Last*
  • w51307 Front Lower Control Arm Bushings - Inner Front Position *While Supplies Last*
  • w51307 360image large 1

Front Lower Control Arm Bushings - Inner Front Position *While Supplies Last*

Manufacturer: Whiteline
Part Number: w51307
Price: $46.39

check_box In Stock check_box Ships Immediately


  • WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.

    WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
FitmentFront Lower Control Arm Bushings - Inner Front Position *While Supplies Last* w51307 fits these vehicles:

Front Control Arm Bushings - Ford Probe - w51307

Whiteline Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace those faulty O.E. rubber bushings with Whiteline's synthetic elastomer control arm bushings. These elastomer bushings provide the longevity and performance needed to maximize a suspension's efficiency.

Whiteline's synthetic elastomer is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing, but it gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.

Whiteline Control Arm Bushings Bag
Worn Rubber Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Whiteline w51307

Product Reviews for Front Control Arm Bushings - Ford Probe - w51307

5 Star (2)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Whiteline w51307

5 out of 5 based on 2 user reviews. Write a Review

B
verified_user

starstarstarstarstar" Excellent on Mazda 96 626 4 cyl auto. "

These work well provide better handling, you do feel the bumps more then with stock rubber which I like. Best part is it eliminates GA2A-34-471 which is the dealer only rubber washer behind the a-arm mounted rubber. I used these to rebuild the A-Arms along with W51308 and Moog Ball joints. I was using some aftermarket A-Arms which need to be realigned with ether a shim kit or castor adjusting bolts which I did not want do. So, I decided to rebuild the originals and used this. Am glad I did. I was able to remove the old rubber using a hammer, but needed a press for the other ball joints and the other rubber (round mount). The original rubber these replace is usually are the first to go if your on a budget and do not want to rebuild the whole front end suspension which is what I did.

verified_user Verified Buyer - - . Whiteline w51307 - 5 out of 5
J
verified_user

starstarstarstarstar" Outstanding customer service "

Would do business with again

verified_user Verified Buyer - - . Whiteline w51307 - 5 out of 5