lock Warranty Information keyboard_arrow_down
- WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.
WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
w83394 | Front Track Arm Bar Bushings - Jeep Grand Cherokee
Adjust Your Handling and Body Roll
When taking a corner your suspension shifts slightly. How much it shifts is largely determined by the quality of the bushings used to mount your track bar (a.k.a Panhard Bar). The track bar's primary job is to keep your suspension centered underneath your vehicle. Other tasks the track bar, and it's bushings, accomplish include the elimination of body roll and increasing your handling overall.
Whiteline Track Bar Bushings
Unfortunately, most OE track bar bushings are made of rubber. While rubber may be good at absorbing vibrations, it doesn't last long. Whiteline crafts all of their track bar bushings with synthetic elastomer, a material much sturdier than rubber. All but immune to both physical wear and corrosion, Whiteline's track bar bushings will undoubtedly outlast and outperform the OE rubber. This increased durability also adds a chance for slightly increased NVH. However, the dramatic increase in your handling and overall safety is well worth it. Plus, Whiteline covers all of their track bar bushings with a lifetime warranty handled in-house here at DST.
Product Reviews for w83394 | Front Track Arm Bar Bushings - Jeep Grand Cherokee
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Whiteline w83394
starstarstarstarstar" Went in easily! Steering slop is much better. "
I installed these bushings on a stock track bar. The hardest part was removing the old ones. Used grease provided and followed instructions.
verified_user Verified Buyer - Mark Gobitas - . Whiteline w83394 - 5 out of 5question_answer Customer Questions and Answers
- Question:
- I would like for you to answer some questions about the bushings for the front track bar. are these bushings split in half, i.e., you push them in from each side? I have the stock track bar with the stock rubber bushings with a steel sleeve. Do I take out the existing rubber and the sleeve or does the steel sleeve remain?
- Answer:
- Kit w83394 are half bushings. You would press the OEM bushing out and install these. Since they are split will make install much easier. Be sure to grease them so they will not squeak.
- Question:
- Are there any special installation instructions for this product? I am curious if i need to leave the stock metal sleeve in or out before installing these new bushings. thanks!
- Answer:
- In most cases the instructions are included in the kits. If not, our website has them on the page the part is listed, send them to you in an email, help you over the phone or give you the manufacturers tech support phone number.