Filters

Porsche 944 1987 Suspension Parts

LogoFront Outer Tie Rod End
Part Number: beckarnley-101-7629
Manufacturer: Beck Arnley

(?)
Accept Terms (5-8 weeks)
Price$57.76
LogoRack and Pinion Bellows Kit - Front Position
Part Number: beckarnley-103-2738
Manufacturer: Beck Arnley
Price$14.35
LogoFront Outer Wheel Bearings
Part Number: beckarnley-051-3434
Manufacturer: Beck Arnley
Price$17.78
LogoRear Wheel Bearings
Part Number: beckarnley-051-3875
Manufacturer: Beck Arnley
For 1992 - 1995 BMW 525i
  • Wagon Only
For 1976 - 1977 Porsche 911
  • Sub Model: S Only
For 1986 Porsche 911
  • Sub Model: Carrera Only
For 1989 Porsche 911
  • 3.2L H6 and 3.6L H6 Only
For 1990 - 1994 Porsche 911
  • 3.6L H6 Only
For 1976 Porsche 912
  • Sub Model: E Only
For 1985 Porsche 944
  • Self Locking Rear Axle Nut
For 2001 - 2004 Porsche Boxster
  • 3.2L H6 Only
Price$77.00
LogoRear Inner CV Joint Boot Kit
Part Number: beckarnley-103-2193
Manufacturer: Beck Arnley
Price$29.26
LogoRear Outer CV Joint Boot Kit
Part Number: beckarnley-103-2193_outer
Manufacturer: Beck Arnley
Price$21.92

Filters

LogoFront Strut Bellow / Bumper Kit
Part Number: moog-k90461
Manufacturer: MOOG
Price$28.51
LogoFront Strut Bumper and Bellows Kit - Monroe Strut-Mate
Part Number: monroe-63618
Manufacturer: Monroe
Price$29.62
LogoFront Sway Bar Bushings - To Lower Control Arm - 18 mm (0.70 Inch) - Measure Bar Diameter
Part Number: spf2922-18k
Manufacturer: SuperPro
  • Original Rubber bushing 951.343.793.30 = Suits factory bar diameter 25.5 and 26.8mm with end size on bar of 18mm
  • Sway Bar To Lower Control Arm Kit

(?)
Accept Terms (8-12 weeks)
Price$42.99
LogoFront Sway Bar Bushings - 25.5mm  (1.0 Inch)
Part Number: spf2922-25.5k
Manufacturer: SuperPro
  • Original Rubber bushing 951.343.793.30 = Suits factory bar diameter 25.5 and 26.8mm with end size on bar of 18mm
  • Sway Bar To Lower Control Arm Kit
Price$42.99
LogoFront Sway Bar Bushings - To Lower Control Arm - 27 mm (1.06 Inch) - Measure Bar Diameter
Part Number: spf2922-27k
Manufacturer: SuperPro
  • Original Rubber bushing 951.343.793.30 = Suits factory bar diameter 25.5 and 26.8mm with end size on bar of 18mm
  • Sway Bar To Lower Control Arm Kit

(?)
Accept Terms (8-12 weeks)
Price$44.54
LogoFront Sway Bar Bushing - 24.5 mm (0.96 Inch)
Part Number: spf2923-24.5k
Manufacturer: SuperPro
  • 1986 - 1988. Suits bracket 944 343 731 00
  • Sway Bar Mount To Chassis Bushing

(?)
Accept Terms (8-12 weeks)
Price$29.99
LogoFront Sway Bar Bushings - 24mm (0.94 Inch)
Part Number: spf2923-24k
Manufacturer: SuperPro
  • 1986 - 1988. Suits bracket 944 343 731 00
  • Sway Bar Mount To Chassis Bushing

(?)
Accept Terms (8-12 weeks)
Price$37.99
LogoFront Sway Bar Bushings - 26mm (1.02 Inch)
Part Number: spf2923-26k
Manufacturer: SuperPro
  • 1986 - 1988. Suits bracket 944 343 731 00
  • Sway Bar Mount To Chassis Bushing

(?)
Accept Terms (8-12 weeks)
Price$37.99
LogoFront Sway Bar Bushings - 27mm (1.06 Inch)
Part Number: spf2923-27k
Manufacturer: SuperPro
  • 1986 - 1988. Suits bracket 944 343 731 00
  • Sway Bar Mount To Chassis Bushing
Price$37.99
LogoFront Tie Rod End
Part Number: rareparts-26292
Manufacturer: Rare Parts

Accept Terms (10-12 Weeks)
Price$34.75
LogoFront Tie Rod End
Part Number: rareparts-29463
Manufacturer: Rare Parts

Accept Terms (10-12 Weeks)
Price$205.37
LogoTie Rod End
Part Number: rareparts-26288
Manufacturer: Rare Parts

Accept Terms (10-12 Weeks)
Price$30.38
LogoEZ Cam XR Bolt  (12MM - PAIR)
Part Number: spc-81250
Manufacturer: SPC
  • Make a two bolt strut adjustable up to +/- 1.75 degree camber with the EZCam™ from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change.
  • SPC's patented EZCams:
    • Make camber changes a cost effective, quick one-person job without grinding
    • SPC’s 12.9 grade bolt provides the best clamp load with the highest safety factor in the industry
    • Use a Hex Chromate-free finish for 700 hr salt spray results vs the competitors’ ~20 hr, to avoid any hydrogen embrittlement issues, and to be environmentally friendly
    • Have markings on the bolt head to show you where the lobe is for easy orientation during adjustment.
  • Measure the OE threads, or order our EZSizer Magnet (p/n 20503) to quickly determine the EZCam you need, and replace the OE bolt to make the strut adjustable for life.
  • The 81139 Magnetic Camber Gauge is a great companion tool for the EZCam, attach it to the rotor and watch camber change as you roll the cam bolt.
  • Part No. 81250 - Pair For replacement of 12mm bolts
  • Front Adjustment range: Camber +/- 1.75 degree
  • Installation time: .4 hr/side
  • Required: 1 kit per axle
Price$22.11
LogoAlignment Assortment Kit
Part Number: moog-cam1a
Manufacturer: MOOG
Price$971.62
LogoFront Alignment Camber Kit
Part Number: moog-k90473
Manufacturer: MOOG
12mm bolts
Single Offset
-1 3/4 degree to +1 3/4 degree
Price$26.09
LogoFront Lower Camber Adjustment Kit - 12 mm Bolts - Double Offset
Part Number: moog-k9757
Manufacturer: MOOG
Allows (neg) 1-3/4 to (pos) 1-3/4 degree camber adjustment.
w/Slotted Strut Bracket Only, 12mm bolts.
Price$27.03
LogoFront Lower Strut Mount Cam Bolt Kit
Part Number: rareparts-16745
Manufacturer: Rare Parts
  • 12mm Bolt; Single Offset
  • Except Performance Package
  • Allows +/- 1-3/4 degrees of adjustment

Accept Terms (10-12 Weeks)
Price$49.17

Porsche 944 1987 | All Suspension Parts

Dont just buy replacement suspension parts for your Porsche 944 1987, buy the absolutely BEST Porsche 944 1987 suspension parts. At Suspension.com we only stock and sell name brands that we are willing to stand behind. You can find the best suspension parts for your Porsche 944 1987 at the best prices at Suspension.com. So whether you need to replace your worn and sagging suspension bushings with performance replacements, or you are upgrading your OE suspension with larger sway bars and sway bar bushings - Suspension.com is where you'll find them.
Shocks Struts and Related Parts

Shocks Struts and Related Parts | Porsche 944 1987

Sway Bars and Sway Bar Parts

Sway Bars and Sway Bar Parts | Porsche 944 1987


Don't see what you needed?

Beck Arnley wants to know...
"What do your customers want us to make for them?"
Tell us and we'll make sure they hear your vote!