Customer Reviews of Daystar Brand Parts
Don't take our word for it. See what other customers are saying about Daystar Suspension Brand Parts.
Daystar Suspension Parts offer a lifetime warranty, but a lifetime warranty doesn't mean anything unless you're happy with the parts. We dont want you to take our word for it that they're excellent parts, just read the reviews below to see for yourself. Folks that have spent their hard earned cash on a part are going to let you know if a part lets them down. EVERY review we have for a Daystar Suspension Part can be found below. If you're not convinced that Daystar is the brand for you, we think these reviews might change your mind. When you've had enough convincing,start here to find the Daystar Suspension Parts for your vehicle.
Reviews Breakdown - 132 Reviews
- 5 Star (112)
-
-
- 84%
-
- 4 Star (13)
-
-
- 10%
-
- 3 Star (6)
-
-
- 5%
-
- 2 Star (1)
-
-
- 1%
-
- 1 Star (1)
-
-
- 1%
-
Body Mount Kit - 1 Inch Lift
starstarstarstarstar “Very good”
I was impressed with how well all the pieces fit. If I were asked who I would suggest it would be Daystar. For fit and finish and easy to read installation instructions.
Ron - . - 5 out of 5Body Bushings Steel Sleeves and Hardware
starstarstarstarstar_border “There good, except for the bolts!”
I am overall satisfied with these body mounts.
Tracy - . - 4 out of 5Front Leveling Kit - 2.5 inch - Gas and Diesel Models
starstarstarstarstar “Review 2 Years Later”
tried putting on vehicle required too much modification to fit directly. Directions didnt suggest cutting or grinding to fit. Editors Note: I looked at the instructions and there was one modification that had to be done. It was cutting off a location nipple on the OEM spring isolator with a pair of wire cutters. No other modification needed.
erick haldorson - . - 5 out of 5Hourglass Shock Eye Bushing Std. 5/8 Inch I.D. (Pair)
starstarstarstarstar “Review 1 Year Later”
Very happy with this product. Truck handles great. Thanks for asking.
Manny Taboada - . - 5 out of 5Body Bushings Steel Sleeves and Hardware
starstarstarstarstar “Review 2 Years Later”
Parts are holding up great. Very pleased.
Heath Spencer - . - 5 out of 5Body Mount Bushings Kit w/ Hardware - Super Duty
starstarstarstarstar “Review 2 Years Later”
When I put this kit on my truck it was almost 20 years old. After the install it rode better than it did when it was new. Still have the truck and it still rides like when the kit was installed. Highly recommend any suspension parts from this company.
Michael McDermott - . - 5 out of 5Body Bushings Steel Sleeves and Hardware
starstarstarstarstar “Review 1 Year Later”
As per our conversation last year about the length of the bolts or lack of cut threads I had to add washers to keep them from still bumping and now that they have settled in I will need to put more washers in as they are bumping again.
Bucky L Elkins - . - 5 out of 5Body Mount Bushings Kit w/ Hardware - Super Duty
starstarstarstarstar “Review 1 Year Later”
Seems to be ok, does make a few alarming noises once in a while but seems ok for now.
Kyle Ayres - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstarstar “Review 1 Year Later”
Great parts and the installation was easy, great company too.\nThank you for your great service.
Leighton Guthrie - . - 5 out of 5Body Mount Bushings Kit w/ Hardware - Super Duty
starstarstarstarstar “Review 1 Year Later”
Better ride and no squeaks. Good product at a good price.
Matthew Smith - . - 5 out of 5Body Mount Bushings Kit w/ Hardware - Super Duty
starstarstarstar_borderstar_border “Review 1 Year Later”
Overall the kit is better than blown-out factory bushings. Its also cheaper to buy this whole kit vs the single bushings from Ford to replace the bad ones as needed. My initial impressions of the kit were that the instructions lacked some much-needed detail and were extremely generic. Ive been a professional auto technician for 18 years so I was able to figure them out but for the average DIY home guy I could see them being a major issue. Also the provided sleeve inserts are extremely cheaply made. I actually had one complete break at the welds when torquing down to the recommended value. I even emailed your company so there would be a paper trail since this was a serious safety concern and I was worried about others breaking in the future. Luckily since the kit covered several model years I had two spare sleeves that I was able to use so my truck was not disabled. After the install the mounts were squeaky. Even with using liberal amounts of lube on the cups and sleeves. Fortunately, the rubber squeak sound was only noticeable at low speeds and with the windows down. Annoying but still better than the blown-out factory bushings clanking around. I sold the truck 6 months later for other reasons so now its someone elses issue. And he never reached out and complained about it so I guess theres that. In short: needs better-printed instructions and better hardware.
Brandon Jackson - . - 3 out of 5Body Bushings Steel Sleeves and Hardware
starstarstarstarstar “Great product”
For the money you cant beat these body bashing kits looks and feels better than factory!
Shawn A McCullough - . - 5 out of 5Suspension Lift Kit Combo - 2-1/2 Inch Front and 1-1/2 Rear
starstarstarstarstar “Prices were good and looks like good quality.”
Have not installed yet.
Steven Culp - . - 5 out of 5Discontinued by Daystar
starstarstarstarstar “Great lift - easy on the wallet”
Installation was easy. Instructions could be better in identifying parts and which bolts go where. I had to modify one of the shock extensions as the bolt hole to the factory mount wouldnt line up. It gives just enough lift that my 33s dont look like a go cart. Shipping was fast and they had the best price by far.
Rodney Rein - . - 5 out of 5Body Bushings Steel Sleeves and Hardware
starstarstarstarstar “Review 2 Years Later”
Outstanding.... No problems at all... The smooth ride continues..
Michael A Slocumb - . - 5 out of 5Discontinued by Daystar
starstarstarstarstar “Review 1 Year Later”
I very happy with the 2 inch lift. I like the ride height & handling.
Robert Firestone - . - 5 out of 5Body Bushings Steel Sleeves and Hardware
starstarstarstarstar “Review 1 Year Later”
Still working as they should. Very satisfied!
Charles - . - 5 out of 5Lift and Leveling Kit 2.5 inches
starstarstarstarstar “Worked out great, fairly tight getting them in the front.”
Overall they are an awesome product, I would recommend them! Hope my Xreaus Suspension doesnt crap out like the threads say it can. I believe this one was low enough!
Mikal Eide - . - 5 out of 5Front Leveling Kit - 2 Inch
starstarstarstarstar “Terrible design”
When putting these on an f-150 the nut/stud combo doesnt tighten all the way down and the rubber isnt thick enough leading to studs on stock struts that push through and the weight of the truck resting solely on three studs. Worst design ever. Editor Notes: In the instructions it states that you may have to shorten the OEM studs an 1/8 of an inch. If not done the stud extenders included with the kit will be too long and cause the issue you are referring to. The weight of the F150 should rest on the polyurethane plate. NOT the studs. Before attempting the installation read the step by step instructions and if you have any questions call our sales reps for help.
Robbie Robbert - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstarstar “Review 1 Year Later”
Great parts and the installation was easy, great company too.\nThank you for your great service.
Leighton Guthrie - . - 5 out of 5Lift and Leveling Kit 2.5 inches
starstarstarstarstar “Great product and fairly easy to install with basic tools.”
Instructions were easy to follow and parts themselves appears to be good-great quality. My only issue would be that Instructions were only provided for the front, but I was able to find a "go by" online for the rear. Happy with the way it turned out.
R. R. - . - 5 out of 5Umbrella Wedge - Black
starstarstarstarstar “Review 2 Years Later”
Very good little part, no problems, thank you.
Jeanie Sherwood - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstarstar_border “Good Product, Poor Instructions”
I have been driving on this kit for a week now and I do like the bushings over the stock. However, The instructions are vague. I am a professional mechanic, and someone with basic hand tools would not be able to complete this job. First off, there is no mention in the instructions for having to Reuse the OEM End Washers on the Lower Bushings. I had to drive them off of the old bushings with an Air Hammer and then cut the holes to 1 inch diameter with a hole saw in order for them to fit over the Daystar Sleeve. I also Had to use a trim washer on the Rear Most Bushing and washer to get the proper spacing. I think Daystar needs to spend a little more time in the shop and less time in the engineering room. Otherwise Its a good product. Well see how they last in Interior Alaska.
Robert - . - 4 out of 5bulk-m02153 - Minimum Purchase QTY 100
starstarstarstarstar “Great products and the customer service was very good.”
The Bushings were exactly what the description stated. The ship time was fast. Very pleased with this company and will use again next time we need some special bushings.
Stephen Wolff - . - 5 out of 5Body Mount Bushings Kit w/ Hardware - Super Duty
starstar_borderstar_borderstar_borderstar_border “Poor quality control of manufactured body mount threaded washers”
After researching Daystar mounting hardware they apparently have an issue with the manufacturing of the body mount threaded washers. While attempting to torque the threaded washers and bolts within the range of Daystar instructions 5 of the 8 washers broke prior to 50 lbs and the package was missing 4 of 8 lower body mounts required to complete the job, as a result, old OEM parts were used put the truck together to get it out of the shop until it can be fixed. Daystar needs to have better quality control to ensure the proper products and quality of product to ensure the safety of the motoring public. Editors Note: This customer had an issue with the washer/nut assemblies. The welds were not good and the nut broke away from the washer. We have sent out replacements and Daystar is looking into the issue.
Jack McCrea - . - 1 out of 5TJ Wrangler Hood Latch Upgrade
starstarstarstarstar “great replacement pieces”
These are great replacement pieces that tightened up my hood latches after cutting the hood for highlines. A little spray paint and the latches are better than new.
John - . - 5 out of 5Front Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Accurate product”
These coil spacers fit as advertised, leveled the truck better than I expected and arrived very quickly. My alignment guy had a little trouble setting the caster on my truck afterward but that isnt unexpected for this type of leveling system. In the end we were able to get it close. Would definitely recommend in the future.
Billy R Stone - . - 5 out of 5Body Mount Bushings Kit w/ Hardware - Super Duty
starstarstarstarstar “”
installed all but the mounts by the radiator. to be honest the old mount were so far gone that it would be impossible for me to do a side by side comparison. (bought vehicle used) they fit great, dont squeak and make the truck feel solid. I dont think they make the ride feel more stiff but they do transfer some road vibration which I dont find objectionable. in my opinion the feel translates to a better overall road feel. i will say that these were installed using air impact gun and we did break a couple of the welds holding the stud receiver to the donut shaped metal piece. We simply substituted a couple of the original ones. Looking at the welds they could have been done better as there was some rust between the stud receiver and the donut where the weld material did not bond. Overall pleased with the product. Editors note: Over torquing the bolts with an impact probably broke the welds on the washer/sleeve assembly. The torque spec is 80-90 foot pounds on those bolts.
mike SCULLY - . - 5 out of 5Body Bushings Steel Sleeves and Hardware
starstarstarstarstar “good”
Very good cost effective way of fixing your vehicle. Would recommend.
John Shuffler - . - 5 out of 5Front Leveling Kit - 1 Inch
starstarstarstarstar “PART DID ITS JOB”
LEVELED TRUCK PERFECTLY.
Dan Moberg - . - 5 out of 5Lift and Leveling Kit 2.5 inches
starstarstarstarstar “Review 2 Years Later”
Great product.
Jimmy espinoza - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Review 2 Years Later”
Only thing I can see is kit needing mount washers other than that outstanding product that I would recommend to anyone.
MIchael T Whitney - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Seem to good quality and fit.”
Went a lot easier than I expected and did improve ride and fit.
Brian Cramer - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Review 2 Years Later”
My parts are still going strong.
Tonia Harrison - . - 5 out of 5Body Mount Bushings Kit w/ Hardware - Super Duty
starstarstarstarstar “Poor quality control of manufactured body mount threaded washers”
After researching Daystar mounting hardware they apparently have an issue with the manufacturing of the body mount threaded washers. While attempting to torque the threaded washers and bolts within the range of Daystar instructions 5 of the 8 washers broke prior to 50 lbs and the package was missing 4 of 8 lower body mounts required to complete the job, as a result, old OEM parts were used put the truck together to get it out of the shop until it can be fixed. Daystar needs to have better quality control to ensure the proper products and quality of product to ensure the safety of the motoring public. Editors Note: This customer had an issue with the washer/nut assemblies. The welds were not good and the nut broke away from the washer. We have sent out replacements and Daystar is looking into the issue.
Jack McCrea - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar_border “They re fine and fit well.”
Delivery time was great they were here in 2 days. The pics in the instructions were not that great couldnt make out which bushings went together but I got old eyes
James A McMonigal - . - 4 out of 5Body Mount Bushings Kit w/ Hardware - Super Duty
starstarstarstarstar_border “Excellent value compared to OEM bushings!”
The OEM product was not a choice for replacing. The only issue I had was with the position 4 hardware mount breaking when I was tightening it down with the pneumatic.
Timothy D. Jones - . - 4 out of 5Body Mount Bushings Kit w/ Hardware - Super Duty
starstarstarstarstar “Good Kit -- solved the problem.”
I had a pretty "squeeky" cab on my 2011 F250 -- one look at the body mounts and it was clear what the problem was. The factory rubber mounts had rotted away -- bought this kit with hardware because it was the polyurethane material. Installation is easy - I had to drill out the threaded spacers and use my factory bolts because the bolts provided did not fit -- but that was no big deal. It solved the problem. Driving review is that these are a bit stiffer than the rubber ones -- some extra vibration in the cab is noticeable, but slight.
Glenn Chiappe - . - 5 out of 5Lift and Leveling Kit 2.5 inches
starstarstarstarstar “Good kit”
Achieves goal of lifting the vehicle with minimal affects on factory suspension. Unlike many aftermarket lifts, factory ride and suspension performance is not compromised. Additional benefit besides tire and frame clearance is actual increase in ground clearance at front differential! We installed this lift at home, but we used a different procedure to remove the front struts-check Youtube for better procedures than Daystar uses. Get a good alignment shop afterwards, it is worth the money to have it done right. Excellent kit, vehicle ends up close to level when completed.
Scott Alan Burkhardt - . - 5 out of 5Umbrella Wedge - Brown
starstarstarstarstar “”
I was searching and searching for quality patio table ring replacement as mine had deteriorated, the umbrella wedge, I believe, is the product I have been searching for. The plastic rings available in most hardware stores are not the proper size to fit my table and causes the umbrella to tilt. I tried the umbrella wedge and it sits a little more than midway I really like the snug fit around the umbrella as well. I am happy with it as its far surpasses those cheap ill fitting umbrella table rings. I recommend it, worth the money as every year I replaced those awful cheap commercial market patio rings.
MARISA - . - 5 out of 5Umbrella Wedge - Brown
starstarstarstar_borderstar_border “Mixed; Seems good product - doesnt work for me.”
Did not work for my application; narrow end of cone is too wide to fit into tall umbrella stands (Treasure Garden)I use. Product seems well designed and made - just too large for my intended use. Editors note: Before ordering you need to know the diameter of the hole to insure the wedge will fit. Here is the dimensions for the umbrella wedge: 1.50in I.D. X 2.30in>1.73in O.D. X 2.50in Length
Paul Corbett - . - 3 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Perfect condition”
Perfect fit.
Chad A Whitler - . - 5 out of 5Front Leveling Kit - 2-1/2 Inch
starstarstarstarstar “Review 2 Years Later”
Great lift not one problem !
John David Jarrell - . - 5 out of 5Front Lift Shock Absorber - 2 Inch
starstarstarstarstar “Excellent product, the front end rides very nice.”
I added a 2in lift on my 2005 Dodge Ram 3500, and these shocks fixed all of the little issues like the popping around when you turn as well as the extra bounce when your shocks are worn out.
Prentiss Mars III - . - 5 out of 5Front Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Review 1 Year Later”
Works as advertised and I have recommended this product to others.
Jerry Miller - . - 5 out of 5Lift and Leveling Kit 2.5 inches
starstarstarstarstar “Good kit”
Achieves goal of lifting the vehicle with minimal affects on factory suspension. Unlike many aftermarket lifts, factory ride and suspension performance is not compromised. Additional benefit besides tire and frame clearance is actual increase in ground clearance at front differential! We installed this lift at home, but we used a different procedure to remove the front struts-check Youtube for better procedures than Daystar uses. Get a good alignment shop afterwards, it is worth the money to have it done right. Excellent kit, vehicle ends up close to level when completed.
Scott Alan Burkhardt - . - 5 out of 5Umbrella Wedge - Brown
starstarstarstarstar “Outstanding product”
Last year we purchased 23 of these (both brown and black) to see if they would keep umbrella poles secure in the umbrella holes and keep the pole from enlarging the hole. They worked great with lighter weight tables. With our really heavy tables we added a collar to keep the umbrella from flying away. We now order a wedge for every new table we buy (the company I work for has over 120 swimming pools in eight states; thats a bunch of tables. Thank you Daystar for providing a simple solution for a common problem.
Mike - . - 5 out of 5Body Mount Bushings Kit - Ford Excursion
starstarstarstarstar “Good Quality Parts”
Will definitely order from these guys again. Fast shipping easy to work with.
RC Tire - . - 5 out of 5Lift and Leveling Kit 2.5 inches
starstarstarstarstar “Good kit”
Achieves goal of lifting the vehicle with minimal affects on factory suspension. Unlike many aftermarket lifts, factory ride and suspension performance is not compromised. Additional benefit besides tire and frame clearance is actual increase in ground clearance at front differential! We installed this lift at home, but we used a different procedure to remove the front struts-check Youtube for better procedures than Daystar uses. Get a good alignment shop afterwards, it is worth the money to have it done right. Excellent kit, vehicle ends up close to level when completed.
Scott Alan Burkhardt - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Review 2 Years Later”
THE PARTS ARE A1.
christopher burke - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstarstar “Good”
I didnt install them but a shop did I only wanted/needed the lca bushings Im sure better than the stock no problems yet.
Daniel Stevenson - . - 5 out of 5Front Coil Spring Spacers - 1 Inch
starstarstarstarstar “Review 2 Years Later”
Still holding up just fine.
dillon atkinson - . - 5 out of 5Front and Rear Suspension Lift - 2 1/2 Inch
starstarstarstarstar_border “Positive”
Great budget boost. 2006 4Runner looks a bit more like a capable SUV than a minivan. Ride Quality is good, hardly any change to body roll or handling. Added a set of 265/65/18 tires and gained 3.75" of ground clearance at the front skid plates, 2.75" from ground to front fender, and 2.5" from ground to rear fender.
Nunya - . - 4 out of 5Lift and Leveling Kit 2.5 inches
starstarstarstarstar “”
Looks great on my 2015 4Runner Limited.
Christie Chastain - . - 5 out of 5Umbrella Wedge - Brown
starstarstarstarstar “Review 2 Years Later”
Wedges are working very well. Had much rain and wind and our umbrellas and tables are standing firm.
Judith Marie Sawyer - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstarstar “Review 1 Year Later”
Bushings are working great no issues no squeeking helped the front alignment.
bradley e brose - . - 5 out of 5Umbrella Wedge - Brown
starstarstarstarstar “Very Poistive!”
These are exactly what we needed for our in ground umbrella sleeves!
Kevin Tucholke - . - 5 out of 5Front Leveling Kit - 2 Inch
starstarstarstarstar “Very nice”
Install went smooth.
Gregg Short - . - 5 out of 5Front Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Review 1 Year Later”
Works as advertised and I have recommended this product to others.
Jerry Miller - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstar_borderstar_border “”
The product was as advertised. The radiator support components and the no. 4 (aft) supports were not as substantial as the OEM supports.
Larry White - . - 3 out of 5Upper Dash Panel - 04-08 F150
starstarstarstarstar “Great”
The area where you put your stuff in this panel needs to be non-slip so whatever you put in doesnt slide around. Other than that, no issues and completely happy with it.
James P. Shirley - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Every thing worked great”
A++++
Lee Oswalt - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstar_borderstar_borderstar_border “Review 1 Year Later”
I have an issue with the lower control arm bushings. They are rocking forward and back in the mounting tubes when I go from forward to reverse. Im wanting to get this taken care of because it sounds like something is seriously wrong with my front suspension. Editors Note: With this kit you need to reuse the outer shell and washers. In this case the customer did not reuse the OEM washers that keep the bushing from rocking front to back. Be sure to follow the instructions or call DST if you need any advice when installing bushings.
adam healzer - . - 2 out of 5Front Leveling Kit - 2 Inch
starstarstarstarstar “Great”
Leveled and raised my 99 Ranger 2 inches in the front. Not hard to install about 2 hours. Cost me $45.00 to get the front end aligned. Then I installed 245 70R 16 tires and rims which gave a 4inch lift over all. Truck looks totally different. Happy with the results.\nMarion
Marion Long - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstar_borderstar_border “Should come with metal sleeves for press in, and needs to come with way more lubricant.”
Removing the old bushings and saving the sleeves is very laborious. This parts should come with the metal sleeves so that the parts could be pressed in, saving time and money. The package came with two tiny tubes of lubricant, which is not nearly enough to completely lube all the bushings sleeves and metal inserts. The one nice thing about these bushings is that the inner sections have voids to hold lubricant, which most other manufacturers do not do when casting bushings.
George Cisneros - . - 3 out of 5Umbrella Wedge - Brown
starstarstarstarstar “”
I was searching and searching for quality patio table ring replacement as mine had deteriorated, the umbrella wedge, I believe, is the product I have been searching for. The plastic rings available in most hardware stores are not the proper size to fit my table and causes the umbrella to tilt. I tried the umbrella wedge and it sits a little more than midway I really like the snug fit around the umbrella as well. I am happy with it as its far surpasses those cheap ill fitting umbrella table rings. I recommend it, worth the money as every year I replaced those awful cheap commercial market patio rings.
MARISA - . - 5 out of 5TJ Wrangler Hood Latch Upgrade
starstarstarstarstar “Well designed, simple solution to an old problem”
These are much stiffer then the factory rubber hood straps, much better fit and finish as well. The old problem being of the hood flapping, fluttering or lifting, whatever you chose to call it. These hood straps have completely eliminated the issue, as well as the extra stress that it puts on the fenders. If youre looking for a replacement for a failed factory set or just replacement of the poorly designed rubber ones. I definitely recommend these things.
John Dawson - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstar_borderstar_border “Review 2 Years Later”
Still having problems with the truck mounts. Makes a lot of noise (squeaking and rattling) and it doesnt seem to matter if youre driving straight or turning. Had the truck back to the shop several times and they greased it but that didnt help either. Ford should address this issue and I have filed a complaint about the body mounts. Cant say for sure if its the parts, installation, or the truck.
Nancy Lewis - . - 3 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Every thing worked great”
A++++
Lee Oswalt - . - 5 out of 5TJ Wrangler Hood Latch Upgrade
starstarstarstarstar_border “Review 2 Years Later”
Yes still working. Was very worried after the OE ones broke in a few months. \n\nHowever cracks have appeared in these since the last few months, so lets lets how long they last now.
Tejas Kothari - . - 4 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Review 2 Years Later”
Very satisfied with parts.
douglas billiot - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Review 2 Years Later”
The parts are holding. I was under the impression the was 3" not 1 1/2. The rear has been lower than than the front. I guess this is why. I bought Toytech front adjustable coil over to even it out. Other than that they are ok. Thanks \nDon
Don Terry - . - 5 out of 5Front Leveling Kit - 2 Inch
starstarstarstarstar “Great”
Leveled and raised my 99 Ranger 2 inches in the front. Not hard to install about 2 hours. Cost me $45.00 to get the front end aligned. Then I installed 245 70R 16 tires and rims which gave a 4inch lift over all. Truck looks totally different. Happy with the results.\nMarion
Marion Long - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar_border “Good product and easy to install”
The product overall was easy to install, it took approx. 1 1/2 hours to install on the driveway with a floor jack and safety stands. The lift actually gave me about 2 inches of lift. My only concern is that I hope the material stands up to the test of time and Canadian winters.
Bobby Wong - . - 4 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstarstar “Review 1 Year Later”
Finally installed lowers. I have aftermarket uppers, and keep blowing rubber bushings up, so well see how these do! They fit nice and snug. Dont let the instructions intimidate you, burning the old bushings out is really easy.
Travis H Anderson - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Review 2 Years Later”
OK now
tsuyoshi takagi LECS USA - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Review 2 Years Later”
OK now
tsuyoshi takagi LECS USA - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Review 1 Year Later”
Your parts were great, but better yet customer service was great and knowledgeable. Parts arrived very quickly what a great company you are. thank you
robert m tomlin - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Review 2 Years Later”
Good parts!
tsuyoshi takagi LECS USA - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Review 2 Years Later”
Ride continues to be 100% better than before replacement of OEM bushings.
Thomas B Carawan - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar_border “Review 1 Year Later”
Well since you asked! The bushings for the "C" pillar didnt fit well. After about 10 months, they were loose and couldnt be tightened any more. Your sales department sent another pair to replace the loose ones. These fit the same, too small. I combined part of the first set and the second set to make a tight fit. So far (200 miles or so) every thing is fine. Thanks for caring.
Edward L. Fenwick - . - 4 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Very happy!”
What a difference between these parts and the original parts put on the truck by Ford. Easy to follow instructions that came with the parts helped greatly. Just make sure that you have a torque bar ready...Now I have to do the same thing for my 1999 Cherokee. Will be back here to purchase them.
Mr. M. - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Very Satisfied”
My 2001 Sport Trac is running like new again, thank you.
Carlos D. Torres - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Review 2 Years Later”
Works good thanks
osvaldo olmo - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstarstar “Review 2 Years Later”
Couldnt tell ya dumped a bunch of money into the truck then got rid of it. The parts fit though. Only problem I encountered was getting the old sleeves out as the new bushings did not have them.
Luke Wunder - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstarstar “Review 1 Year Later”
very good goods. everything works remarkably
Natalia Figurina nataliafigurina2011 - . - 5 out of 5Suspension Lift Kit Combo - 2 Inch
starstarstarstarstar “great”
The install went great, was easy to install. My customer was more that satisfied. Thank you
Sean Hilty - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Great product”
Easy installation. Still have factory ride with a little extra height to accommodate 285/70r17 tires
Matthew Patterson - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “good”
good product, customer is very happy with their truck. reasonable priced, and would use your products again.
Neals repair service - . - 5 out of 5Body Mount Kit - 1 Inch Lift
starstarstarstarstar “perfect”
Everything was perfect
JASON HOWSE / howseeyeontarget - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Great product,easy install!!!”
Product was just as described. With good instructions and easy installation. Highly recommended
Dallas Derksen / scoutman80 - . - 5 out of 5Front Leveling Kit - 2 Inch
starstarstarstarstar “Great”
Leveled and raised my 99 Ranger 2 inches in the front. Not hard to install about 2 hours. Cost me $45.00 to get the front end aligned. Then I installed 245 70R 16 tires and rims which gave a 4inch lift over all. Truck looks totally different. Happy with the results.\nMarion
Marion Long - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Parts were high quailty”
Replaced body mounts 2 & 3 as they were the only ones with the deteriorating material. Took about four hours with two old guys. All squeaks are gone and the ride is much improved.
Jack Clem - . - 5 out of 5Front Upper and Lower Control Arm Bushings
starstarstarstarstar “Overall Good”
The product is made to fit correctly and was relatively easy to install. The instructions could have been more detailed, describing what goes where, the fact that the metal collar needs to stay in the A-Arms etc. Overall satisfied.
Pete S Janemark / superswede10000 - . - 5 out of 5JK Wrangler Hood Latch Upgrade
starstarstarstarstar “Solved the bouncing JK hood problem!”
Perfect solution to the chronic JK bouncing hood. Easy to install and half the price of other solutions.
Ronald Ragon - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Good company to deal with.”
No concerns, bought parts and hired shop to install. Ford really should recall this problem, but glad affordable aftermarket parts were available.
Chip Redman - . - 5 out of 5Front Coil Spring Spacers - 1 Inch
starstarstarstarstar “Satisfy”
Good parts and fast Delivery
Sandro Munoz / sandromunoz - . - 5 out of 5Body Mount Kit - 1 Inch Lift
starstarstarstarstar “amazed”
DAYSTAR IS AMAZING. Super easy to install. Hard part is removing the stock junk. Couldnt be more pleased. Just make sure you steering column can extend or you will be looking for one like me.
Ramiro Alaniz - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “very satisfied with parts”
There is one suggestion I would like to make. The bolts and nut were rusted and in bad condition, much time was wasted getting the off. If those came with the bushings you could cut the old ones off and save a lot of time (approximately two hours). Thanks for the timely shipment and the neat packaging.
Charles Stewart - . - 5 out of 5Suspension Lift Kit Combo - 2-1/2 Inch Front and 1-1/2 Rear
starstarstarstarstar “”
I do not install these on a regular bases. I just wish it had came with some instructions. Thanks
walter evans - . - 5 out of 5Upper Dash Panel - 04-08 F150
starstarstarstarstar “Great!!!”
The storage capacity is bigger and it keeps everything in place when you turn it doesnt slide out anymore.
Angel Flores - . - 5 out of 5OBDII Port - Do Not Flash - Plug
starstarstarstarstar “good”
Nice product
hilton marlin - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar_border “Review 1 Year Later”
Well since you asked! The bushings for the "C" pillar didnt fit well. After about 10 months, they were loose and couldnt be tightened any more. Your sales department sent another pair to replace the loose ones. These fit the same, too small. I combined part of the first set and the second set to make a tight fit. So far (200 miles or so) every thing is fine. Thanks for caring.
Edward L. Fenwick - . - 4 out of 5TJ Wrangler Hood Latch Upgrade
starstarstarstarstar “Well designed, simple solution to an old problem”
These are much stiffer then the factory rubber hood straps, much better fit and finish as well. The old problem being of the hood flapping, fluttering or lifting, whatever you chose to call it. These hood straps have completely eliminated the issue, as well as the extra stress that it puts on the fenders. If youre looking for a replacement for a failed factory set or just replacement of the poorly designed rubber ones. I definitely recommend these things.
John Dawson - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Excellent”
Very good price. Fits well
Alfonso Serrano milagrosalfonso - . - 5 out of 5Front and Rear Suspension Lift
starstarstarstarstar “I was very happy”
I was very happy
Albert Smith, snowprojack - . - 5 out of 5Front and Rear Suspension Lift
starstarstarstarstar “Very good”
Good product. Perfect fit with the springs.
Andrea Leonardi - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Review 1 Year Later”
The rear pair of bushinga did not fit so I had to reuse the originals. Otherwise pleased, thanks
Charles Mull - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar_border “Good product and price”
Good product and price. Much more reasonable than dealer price.
Stephen Buddin - . - 4 out of 5Rear Extended Bump Stop (2 per set)
starstarstarstarstar “Just What Was Needed”
I bought these bump stops for my 1990 Toyota pickup truck. The old ones rusted out and fell off. I had to modify the mounting holes to get them to fit but its not much of a job if you have a drill and bit. The support people were super helpful with my questions and provided me with the information I needed to buy the parts, especially since they were not made for my vehicle. The polyurethane bumpers are a definite upgrade from the factory rubber stops.
Ron Barbish - . - 5 out of 5Upper Dash Panel with GPS Phone Mount
starstarstarstarstar “Awesome addition to my JKU”
This is one of those, "Why didn't I think of that?" accessories that cost very little, and makes life a little easier. No more GPS falling off of the windshield when the suction cup lets go, or bean bag mount sliding across the dash while cornering. This tray replaces the original with a single screw install. No loss of tray function and a rock solid mount for the GPS.
KENNETH MARTINSON - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Good product and easy to install”
The product overall was easy to install, it took approx. 1 1/2 hours to install on the driveway with a floor jack and safety stands. The lift actually gave me about 2 inches of lift. My only concern is that I hope the material stands up to the test of time and Canadian winters.
Bobby Wong - . - 5 out of 5JK Wrangler Hood Latch Upgrade
starstarstarstarstar “Works like a charm!”
Easy 10 minute install. Thought my hood was going to fly off on the highway before, no noticeable flutter afterwards. Highly recommend for all JK owners.
JBH - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Great”
Really love this product. Very easy to install, Love the way my 4 Runner looks. Hated that the vehicle sat low on the rear end. Now the back sits a little higher than the front.
mark ardisana - . - 5 out of 5Body Mount Kit
starstarstarstarstar “product performed very well”
Will buy product again.
David Bentley - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar_border “better quality than oem junk”
Re-leveled the body with the new bushings installed. OEM were rotted off in several locations. Much cheaper than what ford wanted for the same inferior OEM bushings. So far I am pleased with your bushings.
Wayne Fox - . - 4 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Very easy”
I installed them in about 5 hrs and that's good for me because I have never done this before. Now I don't hear any more squeaks so I'm very impressed.
Daniel Alaniz - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Superior product”
Over all, you could immediately tell that the quality of the material of the replacement suspension parts was far superior to the stock material used in the factory application.
GARY TUFANO - . - 5 out of 5D-Ring Isolator - Black
starstarstarstarstar “Simple, rugged, priced right”
These do exactly what i wanted them to do, and stopped the clanking from my front D-rings banging on my bumper. I have yet to yank my truck with these on so I'm not sure how well they will hold up to the abuse. I also wish they came in the 7/8" d-rings. These 3/4" ones are a bit small for my fullsize truck.
Paige Burton - . - 5 out of 5Rear Extended Bump Stop (2 per set)
starstarstarstarstar “Excellent fit”
These extended bump stops are just what I needed to slowly reduce the rear axle upward travel without a loud bang. They fit perfectly.
Vaughn Jeffery - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Very good product”
I had my mechanic install the bushings because all of mine had completely crumbled,except for the ones under the radiator. It took him 31/2 hours to install. I am very happy with the performance and the ride with the new bushings installed.I think there is probably a lot of Sport Trac owners out there that would love to know about these bushings. I looked for a long time before finding them. I would recommend these to anybody that is having the same problem with rotting bushings, as I had. By all rights Ford should have a recall due to safety reasons. I did everything I could to get something done. Ford has a bit more leverage than me. So for the time being, these bushings are your best bet.
Henry Hanson - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Great”
GrEAT PRODUCT AT A GREAT PRICE !!! Great fast shipping too !!! Thank you. The Ford dealers prices were just CRAZY !!!
charles mcclurkin - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar_border “Very good product except for front mounts”
Overall seems to be a great product for a good price compared to the dealership. The only problem I had was in the front (radiator) mounts. I was not able to replace these because the slot in the frame is round and the mounting plate on the new mounts are more oval in shape. It is possible that I may have been able to force or hammer them in but my original mounts in the front were ok so I just left them alone and tightened them back. I just replaced the others and had no problem with the fit. The numbered parts were very easy to read and match up with the proper location.
Stephen D. Stone - . - 4 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “Excellent product. Packaged well.”
My local body shop charged me $450 to install. The new parts installed with ease according to the body shop. The only issues they had were in removing the old parts as some had to be pressed out. The truck now rides and handles as it were new. Overall I'm very satisfied with the product and the end results.
Cliff LaChance - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstarstar “GREAT PRODUCT!!!”
INSTALLED WITH NO PROBLEMS AND THE CUSTOMER DID NOT NOTICE ANY HARSH RIDE BUT WAS PLEASED HIS RIDE HAD RETURNED TO NORMAL HEIGHT.
CLAY DILLAHUNTY - . - 5 out of 5Rear Suspension Lift - 1 1/2 Inch
starstarstarstarstar “High recommneded.”
I am very happy with these spacers. Recommended.
Heriberto Perez - . - 5 out of 5Body Mount Bushings and Radiator Support Bushings - Ford Explorer Sport Trac
starstarstarstar_borderstar_border “did the job i needed but expected better.”
BASIC REVIEW: got rid of the annoying squeeking and crunching that the worn out oem was making but produced a bit more engine and road noise than the oem. BIG PROBLEM: the rear c-pillar mounts did not fit my 02 sport trace because they were not as "tall" as the oem and the existing metal sleeves when put together were taller than the mount but in my case the rear oem mounts did not need replacing so i just left them. also... i had to loosen and lift the bed for clearance when the body was lifted. the rocker molding attached to the cab will rise and hit the bed in front of the rear tire when the cab is lifted. this wasn't a big deal... it just wasn't listed as a necessary step in the instructions.
austin - . - 3 out of 5Front Leveling Kit - Torsion Bar Suspension - 2 Inch
starstarstarstarstar “OEM quality. Perfect fit”
OEM quality for a perfect fit!
Timothy Hess - . - 5 out of 5Front Lift Shock Absorber - 2 Inch
starstarstarstarstar “”
Them parts were just what I needed thanks
BRIAN ISENHOWER - . - 5 out of 5Front and Rear Suspension Lift
starstarstarstarstar “They worked great!!!”
I have 2002 jeep liberty sport gas engine and these parts fit like a glove. The part # KJ09123BK says for diesel engines but this is the part you need for a 2002 jeep liberty gas engine. Easy to install, only took a couple hours. They raised my vehicle up 2 inches and now it looks so much better. I would recommend these to anyone that wants to raise their vehicle. Its not too high but it makes other liberty owners jealous now. Anyway I am happy with the way it turned out.
David Coleman - . - 5 out of 5Front Leveling Kit - 1 Inch
starstarstarstarstar_border “Met expectations”
Provided exactly 1" lift for 1996 C1500, leveled front to rear about 1/2 of total dip. Need a spring compressor to install, installed easy after that.
James - . - 4 out of 5Front Suspension Lift - 1 1/2 Inch
starstarstarstarstar “Great fit easy to install”
Parts worked great, easy to install over all. Had them on the truck for over a month and have not lost any lift like other kits
Luke David - . - 5 out of 5Front Suspension Lift - 2 Inch
starstarstarstarstar “Great product, extremely pleased!!!!”
After receiving this product it sat on the garage shelf for a couple of months before I got around to install it. I installed it with just a little help from a friend. I did it in my dirt driveway with very basic and minimal tools. This is definitely not the ideal way to install this product, but I believe this shows how easy it is to install the product. After I finished the installation I took my truck to get an alignment. Once the alignment was finished I took my truck for a spin and it now rides amazing. I was also able to fit 33" tires without any clearance issues. Overall I am very pleased.
Dennis Heil - . - 5 out of 5