Universal Camber Adjustment Bolts
SPC's EZ Cam bolts offer a cost effective and simple option for adjusting your camber +/- 1.75 degrees. Choose a bolt size below for your application.
Featuring a Hex Chromate free finish to avoid any embrittlement issues and keeping the bolt environmentally friendly. During a salt spray test competitors bolts lasted around 20 hours while SPC's EZ Cam bolts remained strong after 700 hours.
To install just remove the upper bolt, install the EZ Cam bolt, and dial in your desired setting. Different bolt sizes are available and come in sets of two which can both be installed in less than an hour.
* Utilize SPC's EZ Sizer Magnet to quickly determine which bolt you need! Pair that with the SPC Magnetic Camber Gauge allowing you to watch the camber change as you roll the EZ cam bolt.
Image | Part Number | Total Length | Camber Adjustment | Thread Pitch | Bolt Size |
---|---|---|---|---|---|
SPC-81240 | 2.4 in 61.15mm |
+/- 1.75 | M8 | 10mm | |
SPC-81250 | 2.565 in 65.17mm |
+/- 1.75 | M10 | 12mm | |
SPC-81260 | 2.765 in 70.23mm |
+/- 1.75 | M12 | 14mm | |
SPC-81270 | 2.813 in 71.45mm |
+/- 1.75 | M12 | 15mm | |
SPC-81280 | 3.152 in 80.06mm |
+/- 1.75 | M14 | 16mm | |
SPC-81290 | 3.212 in 81.60mm |
+/- 1.75 | M14 | 17mm |