w21334 | Front Sway Bar Bushings - 24 mm | Pontiac GTO | W21334

  • w21334 Front Sway Bar Bushings - 24mm (0.94 inch)
  • w21334 Front Sway Bar Bushings - 24mm (0.94 inch)
  • w21334 Front Sway Bar Bushings - 24mm (0.94 inch)

Front Sway Bar Bushings - 24mm (0.94 inch)

Manufacturer: Whiteline
Part Number: w21334
$17.82 - 50% Off Certain Clearance Products! - Save: $8.91
Price: $8.91

check_box In Stock check_box Ships Immediately


Suggested part for w21334: dll124
dll124 Front Sway Bar Lateral Locks - 23-24mm
DST Silver Color - Limited Lifetime Warranty

Suggested part for w21334: kll124
kll124 Sway Bar Lateral Locks - 23-24mm
Whiteline Gold Color Plated - 3 Year Warranty

Suggested part for w21334: whiteline-lubricant
whiteline-lubricant EZE Grease Polyurethane Bushing Lubricant and Prelube - 3 Pack
Whiteline provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.

    WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
FitmentFront Sway Bar Bushings - 24mm (0.94 inch) w21334 fits these vehicles:
Details

w21334 | Front Sway Bar Bushings - 24 mm | Pontiac GTO | W21334

Only Fits 24mm Bar

Whiteline Sway Bar Bushings

Intended to hold your sway bar in place, sway bar bushings play an important role in your suspension. Whereas OE bushings are made of a soft rubber, Whiteline Sway Bar bushings are made of synthetic elastomer, a much more durable material. Whiteline's elastomer does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long-lasting part on your sway bar with Whiteline's sway bar bushings. Synthetic elastomer sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Whiteline Sway Bar Bushing Bag
Whiteline Sway Bar Bushing Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact while driving. The sway bar is held tightly to the frame of the vehicle via sway bar bushings. Original Equipment rubber bushings, as mentioned previously, can warp and/or crack, losing their grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could (not) keep on a sway bar.

Fitment for w21334
Chevrolet Lumina VT, VX SEDAN and COUPE (9/1997-9/2002)
Chevrolet Lumina VY, VZ SEDAN and COUPE (10/2002-8/2006)
HOLDEN ADVENTRA VY, VZ Including HSV All Wheel Drive (10/2002-8/2006)
Holden Commodore VB, VC, VH, VK, VL Including HDT and HSV (1978-7/1988)
Holden Commodore VN, VP, VQ, VG Including STATESMAN, CAPRICE, UTE and HSV (8/1988-7/1993)
Holden Commodore VR, VS Including STATESMAN, CAPRICE, UTE and HSV (7/1993-9/1997)
Holden Commodore VT, VX, VU, V2, WH Including MONARO, STATESMAN, CAPRICE, UTE and HSV (9/1997-9/2002)
Holden Commodore VY, VZ, V2, WK, WL Including MONARO, STATESMAN, CAPRICE, UTE, 1 TONNER and HSV 2WD (10/2002-8/2006)
HOLDEN CREWMAN VY, VZ 2WD (10/2002-8/2006)
HOLDEN CREWMAN VY, VZ CROSS 6 and 8 Including HSV All Wheel Drive (10/2002-8/2006)
Holden Vectra ZC (3/2003-12/2006)
OPEL REKORD E1, E2 (1978-1986)
TOYOTA LEXCEN VN, VP (8/1988-7/1993)
TOYOTA LEXCEN VR, VS (7/1993-9/1997)
VAUXHALL CARLTON E1, E2 (1978-1986)
Vauzhall Monaro VXR (2004-8/2006)