Suspension Restoration Parts Energy Suspension

Go back to the index page

ACURA INTEGRA
Yes, WE have it in stock!
We have all these Black Graphite Impregnated polyurethane bushings
bushings in stock.
Red is available as a special order, allow 4-6 weeks for delivery.
If you wanted it today, you should have order it from us yesterday.


How do we define the word 'SET'.  
A 'SET' has enough bushings to do the left and right sides of vehicle.
Control arm bushing sets will also include lower & upper positions, if required.

Order one set per vehicle.
YEAR
of your vehicle
FRONT END CONTROL ARM BUSHINGS SET
Does
not include
shock bushings
FRONT SHOCK UPPER & LOWER BUSHING SET
REAR END CONTROL ARM BUSHINGS SET
Does
not include
shock bushings
REAR SHOCK UPPER & LOWER BUSHING SET
REAR TRAILING ARM BUSHING SETS
STRUT ROD BUSHING SET
FRONT SWAY BAR FRAME BUSHINGS, PAIR
must re-use brackets.
Please measure the diameter of the sway bar before ordering.
REAR SWAY BAR FRAME BUSHINGS, PAIR.
must re-use brackets.
Please measure the diameter of the sway bar before ordering.
FRONT SWAY BAR ENDLINKS,
PAIR
Includes bolts, washers, sleeves, grommets & nuts.
OUTER TIE ROD END DUST BOOTS, PAIR
UPPER & LOWER BALL JOINT DUST BOOT SETS
(4)
MASTER SET
2004-05
TSX
?
?
?
?
?
?
16.5137
25.4mm (1.00")
$12.00

0.5#
16.5138
15 mm
$9.00

0.4#
?
?
?
?
02-03
Prothane brand
part number

8-215 (2)
Price of part
$47.00

Uppers & lowers must use
existing outer shells
n/a
Prothane brand
Upper & Lower set
8.318
$135.00

n/a
n/a
n/a
Prothane
brand

8.1135
23 mm
$6.00

Prothane
brand

8.1136
19 mm
$6.00

n/a
n/a
n/a
n/a
2002-04 RSX
&
Type S
 Energy Suspension Part number
16.3116 (2)
Price of part
$53.00

Uppers & lowers must use
existing outer shells

weight of part
3.2#
*
16.3117
$56.00

1.5#
*
*
*
16.5131
23mm
$9.00

.3#
16.5132
19mm
$8.00

.2#
*
*
*
16.18111
$98.00

5.0#
94-01
16.3105 (2)
$49.00
Uppers & lowers must use
existing outer shells

2.7#
16.8102
$20.00

See note below
1.2#
16.3109 (2)
lowers only,
will not fit
type 'R'

$34.00

1.6#
Prothane Brand
Upper control arm bushing set
#8.307
$81.00
16.8103
$20.00

See note below
1.5#
16.7106
Trailing arm bushing set.
$28.00
1.2#

Prothane Brand
Trailing arm bushing set.
#8.304
$105.00


Prothane Brand
Compensator bushing set
8.309
$39.00
Not
required
(24mm)16.5104
(22mm)16.5108
(21mm)16.5105
$8.00
per pair
.3#
(13mm)16.5107
(14mm)16.5116
$8.00
per pair
.3#
16.8104*
$15.00

.7#
9.13103
$4.00
Pair
.2#
16.13101
$8.00
set of 4 boots
.2#
16.18105
except type 'R'
$139.00

8.3#
90-93
16.3108 (2)
$47.00
Uppers & lowers must use
existing outer shells

1.7#
16.8102
$20.00

See note below
1.2#
16.3109 (2)
lowers only,
will not fit
type 'R'

$34.00

1.6#
Prothane Brand
Upper control arm bushing set
#8.307
$81.00

16.8103
$20.00

See note below
1.5#
16.7107
$35.00

1.2#

Prothane Brand
Trailing arm bushing set.
#8.314
$111.00


Prothane Brand
Compensator bushing set
8.309
$39.00
16.7104
$20.00

1.2#
(23 mm) 16.5113
(22 mm) 16.5118
$8.00
per pair
.3#
(15mm)16.5112
(16mm)16.5114
$8.00
per pair
.3#
16.8104*
$15.00

.7#
9.13103
$4.00
Pair
.2#
16.13101
$8.00
set of 4 boots
.2#
16.18104
$154.00

8.2#
How do we define the word 'SET'.  
A 'SET' has enough bushings to do the left and right sides of vehicle.
Control arm bushing sets will also include lower & upper positions, if required.

Order one set per vehicle.
FOOTNOTES: (2) Must re-use all metal parts.  This means you must burn out the old rubber bushing and then install the polyurethane bushing in place of the rubber.  You must re-use the O.E.M. outer metal shells.
The 16.3105, 16.3108 &16-3109 sets do not include the shock/strut bushings.

THIS IS THE NOTE:
 The 16-8102 & 16-8103 are sometimes referred to as the center bushing on the lower control arms.
These bushings are not included with the front or rear lower control arm bushing sets.
The bolts that hold the shocks onto the lower control arm are usually frozen/rusted on the lower control arm.  
They are difficult to remove and you will usually destroy the rubber bushing surrounding the bolt, when you attempt to remove the shock/strut.  
We do not supply bolts.

*
V-tec and del sol only require 1/2 of a 16-8104. SRP has just the grommets only, available for $1.00 each.
Each sway bar requires 4 grommets, your cost is $4.00

  
This is an example of how to read our tables:
YEAR
of your vehicle
FRONT END CONTROL ARM BUSHINGS SET
Sets always have enough bushings for the left & right side of the vehicle.
You only have to order one set per vehicle.
90-93
This is the part number
16.3108
This is the price of part
$47.00
Price is in U.S. dollars
Price does not include the cost of shipping.

(2)
This is a note you should read

Uppers & lowers must use
existing outer shells
1.7#
This is the weight of the part 16.3108

FOOTNOTES: we will sometimes have informational notes for you to read at the bottom of a table.

click on this link to see what  PROTHANE offers for upper rear control arm bushings, compensator bushings & trailing arm bushings for Integra and Civic
YEAR
APPLICATION DESCRIPTION & PART #
PART
NUMBER

SRP
Price
1994-01
Rear Trailing Arm Bushing Set ......
Must re-use all metal parts.
Re-Engineered Rear Trailing Arm bushings
dramatically help the vehicle maintain
proper rear toe and caster conditions.
Important when your car is using larger-than stock-tires and wheels.
16.7106
$28.00
1.3#
1990-93
Rear Trailing Arm Bushing Set ......
Must re-use all metal parts.
Re-Engineered Rear Trailing Arm bushings
dramatically help the vehicle maintain
proper rear toe and caster conditions.
Important when your car is using larger-than stock-tires and wheels.
16.7107
$35.00
1.2#
1990-01
Front shock upper & lower bushing set 16.8102
$20.00
1.2#
1990-01
Rear shock upper & lower bushing set 16.8103
$20.00
1.5#
1990-01
Transmission shifter stabilizer bushing set 16.1101
$11.00
0.4#
1994-01
Steering rack bushing set (power steering only)
16.10102
$7.00

0.3#
1990-93
Steering rack bushing set(power steering only)
16.10103
$7.00

0.3#
NEW!! MASTER KITS AVAILABLE!!
YEAR Description of parts in each set. MASTER KIT# Shipping Weight
2002-04
Front & rear control arm bushings, Front & rear sway bar frame bushing sets
Uppers & lowers must use existing outer shells
16.18111
$
98.00

 7 pounds
4.9#
94 - 01 Front & rear control arm bushings, front & rear shock bushings,
front end links, steering rack bushings(power steering only),
transmission shifter stabilizer bushings for manual  only,
ball joint and tie rod end boots
Uppers & lowers must use existing outer shells
16.18105
Except type 'R'
139.00
8 pounds
8.2#
90 - 93 Front & rear control arm bushings, front strut rod bushings, front & rear shock bushings,
front end links, steering rack bushings(power steering only),
transmission shifter stabilizer bushings for manual  only,
ball joint and tie rod end boots
Uppers & lowers must use existing outer shells
16.18104
$154.00
8 pounds
8.1#
Master kits do not include sway bar frame bushings, motor mounts inserts or trailing arm bushings.


MOTOR MOUNT SETS
(will NOT fit cars with automatic transmissions)
These unique 2 piece polyurethane Motor Mount Inserts, insert into the sides of the existing mount,

preventing tearing of original soft rubber mount material. A must-use for high performance conditions!
Motor mount inserts were developed to decrease wheel hop during drag race/road race conditions.
Think of your existing motor mount as the meat in a sandwich and the inserts are the bread.
Energy Suspension originally made all the motor mount positions for Acura/Honda cars.
During testing, they found that the poly inserts caused so much vibration,
that the inserts caused the body to crack where the mount was welded to the body.
Since they could not sell a product that would ruin your car they have refused to sell the side support mount inserts.
Energy Suspension only makes inserts for the torque mount positions to reduce the engine rotation/flex during acceleration,
allowing the support mounts absorb vibrations so that the body will not crack.

A  note about motormount sets:  These sets were designed to be performance upgrade parts for your existing motormount.  They do not include the outer metal housing and are not designed to replace your motormount.  They are designed to decrease the flexing movement of the inner rubber of the existing motormount, by filling the void areas or open areas of the rubber in the motormount.  This is why they are called 'INSERTS'.  It does not mean that they replace the rubber in the motormount.  The intended use of the inserts was to reduce flexing of the motormount and decrease the rocking motion of the engine.  The rocking motion of the engine was found to be related to the problem of wheel hop when the car is accelerated aggressively(drag raced).  So the part was designed to help people who wanted to drag race.  Someone later, noticed that if you install a motormount insert into a rubber motormount that has one of it's fingers broken, that the motormount insert could in some instances 'repair' the mount.  This was not the intention of the motormount insert designers and we do not recommend this as solution to a broken motor mount.

ENERGY SUSPENSION BRAND MOTOR MOUNT INSERTS
YEAR
MODEL WITH
MANUAL TRANSMISSION

# OF POSITIONS
SUPPLIED
(AS IF YOU WERE SITTING IN YOUR CAR)
Part
#
PRICE
2002-04
RSX & S
2 Torque Mount Positions supplied.
16.1110
With Manual Transmission only
$24.00
1.0#
1994-01
INTEGRA
3 Torque Mount positions
#1 Front-right side(pass. side) lower mount position.
#2 Rear-position, firewall.
#3 Front-left side(driver's side) lower mount position
16.1106
With Manual Transmission only
$45.00
1.5#
1990-93 INTEGRA
1) Front and 1) Rear Torque
mount positions supplied
16.1109
With Manual Transmission only
$24.00
.7#
PROTHANE BRAND MOTOR MOUNT INSERTS
YEAR MODEL WITH
MANUAL TRANSMISSION
# OF POSITIONS
SUPPLIED
(AS IF YOU WERE SITTING IN YOUR CAR)
3 POSITION SET PART
#
PRICE
1994-01
INTEGRA
8-501 LEFT, 8-502 RIGHT, 8-509 REAR, FRONT N/A
8-1904
$53.00
1992-93
INTEGRA GSR
8-510 LEFT, 8-511 RIGHT, 8-512 REAR, FRONT N/A
8-1905
$30.00
1992-93
INTEGRA, GS, LS, RS 8-516 LEFT, 8-511 RIGHT, 8-512 REAR, FRONT N/A
8-1908
$45.00
1990-91
INTEGRA, GS, LS, RS
8-510 LEFT, 8-511 RIGHT, 8-512 REAR, FRONT N/A 8-1905 $30.00


1990-93 Acura Integra front suspension

typical Acura master set  

Picture of a typical master set for Acura/Honda Civic


PRODUCT WEIGHT
is now included in the charts above.  
1.2# means that the part number listed weighs 1 pound & 2 tenths of a pound.
We are giving this measurement, because this is how Energy Suspension has chosen to give us the weight of each part number.
1 Pound(lb.or #) = 16 ounces(oz.) divided by 10 = 1.6 oz.  
This is not the shipping weight, just the weight of the part.  
To estimate your shipping cost, you should round up to the next pound and usually add about a pound for shipping weight.  
When we ship via UPS(United Parcel Service) we have to round up to the next pound.
  UPS does not accept ounce weight, or increments of tenths.  
We will always weigh your order on an electronic scale and charge you for the exact weight, rounded up to the next pound.  
For USPS(United States Postal Service) shipping we also round up to the next pound.

ABOUT THE COST OF SHIPPING VIA
UPS
(United Parcel Service)
AS OF MARCH 1, 2008,
We are providing you with this information, so that you can ESTIMATE your shipping cost before you place your order.
The prices in the table below represent the cost of shipping a package from our warehouse in
Modesto, California to a residential address in Maine, the furthest point from CA.
UPS will charge extra for some rural addresses.
If your address is in a zone west of the east coast zone(Maine to Florida), say in the Midwest or on the West Coast, your shipping cost will be less.
Of course Alaska & Hawaii are exceptions, call us for the rates.
When
UPS charges us less to ship to your address, we will charge you less.
If they charge us more than is on the chart below, we charge you more.
We charge you the exact cost of shipping. 
After you have placed your order:
1. We will weigh your order
2. Put the weight and your address into the
UPS shipping computer
3. Assign the level of shipping you request, Ground, 1 day, 2 day or 3 day
4. Enter the value if it is over $100.00
5. Charge you exactly what the
UPS computer says it will cost to ship your order to you.
It is NOT our goal to make money off of shipping.

The
UPS prices below are ESTIMATES. 
They do not include rural surcharges that could apply to some addresses.
For Alaska & Hawaii please call us for rates.
YOUR SHIPPING OPTIONS
PACKAGE WEIGHT
United Parcel Service
UPS
GROUND
Modesto, CA. to Maine
UPS
3 DAY AIR
Modesto, CA. to Maine
UPS
2 DAY AIR
Modesto, CA. to Maine
UPS
1 DAY AIR
Modesto, CA. to Maine
United States Postal Service
USPS PRIORITY MAIL
DELIVERY TO ANY USA
ADDRESSES ONLY.
(2 - 4 DAYS)
For over seas orders
See the USPS website: http://ircalc.usps.gov/
to calculate the cost to ship your order to your country.

United States Postal Service
USPS FLAT RATE BOX SPECIFICATIONS
AND
INSURANCE INFORMATION
1 POUND (1.0#)
10.38
18.42
22.77
49.83
$5.00
UNITED STATES POSTAL SERVICE (USPS)
Required USPS boxes for flat rate service:
USPS PRIORITY BOXES

Box #1 = 11-7/8 x 3-3/8 x 13-5/8 inches
$9.25
Box #2 = 11 x 8-1/2 x 5-1/2 inches.
$9.25
New even bigger Flat Rate Box now available
Box #3 = 12" x 12" x 5-1/5"
$13.25
Rates are for USA addresses only.
Flat rate service is available for Canada
and some other countries at an increased cost.
See this website:
http://ircalc.usps.gov/
for rates to your country.








There is not a weight limit for USPS flat rate boxes, but there is a limit as to how much we can fit into USPS flat rate boxes.

United Parcel Service(UPS) includes insurance.

USPS
does NOT include INSURANCE.
If USPS loses your package and your order is not insured,
you will have to place another order. 
We will not offer to pay for the lost part or for another shipment.

If you want to add insurance to your USPS shipment,
ask us for it
.
Here are the USPS insurance rates:

$0.01 TO $50.00 value of your order
$1.65

$50.01 TO $100.00 value of your order
$2.05


$100.01 to $200.00 value of your order.
$2.45


A note about USPS shipments.  The USPS carrier usually picks up packages at out business first thing every morning Monday - Friday (we are not open Saturday or Sunday).  This usually means that your order will not leave until the next day, so figure on 3-4 days for delivery.
2 POUNDS (2.0#)
11.25
20.60
25.69
54.87
$7.75
3 POUNDS (3.0#)
11.97
22.77
28.62
59.48
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
4 POUNDS (4.0#)
12.43
24.71
31.79
64.52
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
5 POUNDS (5.0#)
12.90
26.57
35.41
69.12
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
6 POUNDS (6.0#)
13.18
28.75
38.20
74.16
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
7 POUNDS (7.0#)
13.58
30.99
41.44
78.77
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
8 POUNDS (8.0#)
14.13
33.29
44.98
83.43
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
9 POUNDS ( 9.0#)
14.75
35.41
48.85
88.41
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
10 POUNDS (10.0#)
15.42
37.64
52.38
93.39
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.

UPS INSURANCE
is included for the first $100.00 value
For orders over $100.00 please add:
$1.20 per $100.00 value
$2.50 per $100.00 value
$2.50 per $100.00 value
$2.50 per $100.00 value
INSURANCE IS NOT INCLUDED WITH USPS SHIPMENTS.
YOU MUST REQUEST INSURANCE COVERAGE.
We accept:
Visa, MasterCard, American Express or Discover credit cards.

At this time, we do not accept PayPal.
To process your order we will need:
1. Your NAME as it appears on the credit card.
2. The BILLING address of the credit card.
3. Your PHONE number
4. The CREDIT CARD number
5. The EXPIRATION date of the credit card.
6. The three(3) digit CVV2 security code on the BACK of the credit card.
7. How do you want us to ship your order?
Yes, you can give us an alternate ship to address.  But we must have the billing address to process your order.
FOR OUR INTERNATIONAL CUSTOMERS
For international orders we normally ship via the United States Postal Service(USPS).
  United Parcel Service(UPS)next day air and second day air is also available, upon request.

Every countries Customs authorities require us to declare the parts we sell to you as merchandise
We are required to send a commercial invoice that lists the value of each part ordered.
We will charge you for the value of the parts plus the cost of shipping to you.
We will not show a reduced price on the invoice or declare the parts as gifts or samples.
You are responsible for all of your countries duties and taxes.
If you want an estimate of the cost of shipping:
1. Add up the total weight of the parts you want to order(the weight is under every part number),
add 1 pound for packaging material.
2. Go to the USPS website http://ircalc.usps.gov/ and enter the country where you want the parts shipped.
3. Enter the weight of your order.
4. Check out the different shipping options, and choose the one that is best for you.

Call us with your order, or we would pre