lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Thanks to the quality design of this part, Moog's K6302HD affordably replaces the OE and keeps you from having to deal with repairs again later down the road.
Moog Problem Solver: K6302HD
Many full-sized vans and SUVs built in the late 1980s to early 2000s required a cam bolt inserted into the upper control arm's mounting holes to maintain their alignment. Over time these cam bolts corrode and strip, leaving your alignment-free to shift. This leads to loss of handling and your tires wearing out quickly and unevenly. In order to solve this problem Moog has designed the K6302HD cam bolt kit. Intended to replace the OE cam bolts with a higher-quality part, the K6302HD uses a double-flat bolt, hardened washers, nuts, and bolts, as well as taller heads on the nuts and bolts. The Double Flat bolt keeps the cams from rounding out by securing them in place instead of just sliding through. The hardened washers, nuts, and bolts keep the whole kit in top condition for much longer than the OE cam bolt. Finally, the taller heads on the nuts and bolts keep wrenches from slipping, reducing the chances of rounding out while also making installation easier.
Product Reviews for moog-k6302hd | Front End Alignment Kit - Chevrolet Tahoe
- 5 Star (3)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-k6302hd
starstarstarstarstar" Quality parts "
Havent installed yet but dont foresee any problems. Pretty straight forward when you buy the best!
verified_user Verified Buyer - Bradley Wheaton - . MOOG moog-k6302hd - 5 out of 5starstarstarstarstar" Review 1 Year Later "
One of many parts going into a 1997 C1500 front end rebuild. All Moog parts made the truck better than new.
verified_user Verified Buyer - Craig Freman - . MOOG moog-k6302hd - 5 out of 5starstarstarstarstar" Review 2 Years Later "
Good quality camber kit. Needs instructions for correct install. My alignment guy charged $50. He said bolts were installed wrong way.
verified_user Verified Buyer - shantel paaoao - . MOOG moog-k6302hd - 5 out of 5