Suspension Restoration Parts
Energy Suspension
CHRYSLER - DODGE - PLYMOUTH

Go back to the index page

We have all these polyurethane bushings bushings in stock in the color
Black Graphite Impregnated.
 Red is available as a special order, allow 4-6 weeks for delivery.
If you wanted it today, you should have ordered it from us yesterday.

A - Body Dart, Duster, Demon,
Valiant(Barracuda thru 69)

How do we define the word 'SET'.  
A 'SET' has enough bushings to do the left and right sides of vehicle.
Control arm bushing sets will also include lower & upper positions, if required.
YEAR
FRONT END CONTROL ARM BUSHING SET
6 BUSHINGS
REAR LEAF SPRING BUSHING SET-
12 BUSHINGS
STRUT ROD BUSHINGS SET-
4 BUSHINGS
FRONT SWAY BAR BUSHING SET (PAIR)
Please measure the diameter of the sway bar before ordering.
FRONT ENDLINKS (PAIR)
TIE-ROD BOOTS (PAIR)
 UPPER CONTROL ARM BUMP STOP SET-(2)
 		LOWER CONTROL ARM BUMP STOP SET-(2)
Torsion Bar Dust Boots (pr.)
You must reuse clips
Ball joint Boot Set(4)
(Upper & Lower)
73-76
Uppers & lowers
set
5.3112  
Lowers must re-use metal parts.
$55.00
5.3132
$45.00
Uppers only
5.2105
$51.00
5.2106
All with 2" main eye and 5/8" bolt
$51.00
5.7109
$21.00
5.5112(13/16")
 1973-74 Only
$11.00
5.5113(7/8")
 1973-74 Only
$11.00
5.5115(15/16")
 1973-74 Only
$11.00
9.8120
$18.00
9.8118
1973-75
$18.00
9.13101
$4.00
9.9103
$9.00
 		9.9119
$9.00
 		 
5.13101
$8.00
  
5.13102
$8.00
Weight
 1.5#
 1.8#
 0.8#
 0.5#
 1.6# / 1.3#
 0.2#
 0.5#
 0.6#
 0.3#
 0.3#
62-72
Uppers & lowers
set
5.3112  
Lowers must re-use metal parts.
$55.00
5.3132
$45.00
Uppers only
 
5.2105
$51.00
5.2106
All with 2" main eye and 5/8" bolt
$51.00
5.7105
1962 to 1965 only
$12.00
5.7109
66-76 only
$21.00
Sway bar frame bushings are not available for 1962 - 1966 A-Body cars.
1967-72 A-Body cars:
7/8"
5.5134
see picture below
$45.00
3.3#
5.5128  (7/8")
$13.00
0.4#
 This is the triangle shaped bushing that fits the O.E. brackets
15/16"
5.5135
see picture below
$45.00
3.3#
5.5129 (15/16")
$13.00
0.4#
This is the triangle shaped bushing that fits the O.E. brackets
9.8118
1965-75
$18.00
9.13101
$4.00
9.9103
$9.00
 		9.9119
$9.00
 
5.13101
$8.00
  5.13102
$8.00
Weight
 1.5#
 1.8#
 0.3# / 0.8#
 see above
 1.3#
 0.2#
 0.5#
 0.6#
 0.3#
 0.3#
FOOTNOTES:
(25) Except 426 and 440 models
 (26) 426 and 440 models
 (27) 65-72
 (28) 73-76
(29) greaseable sway bar bushings
(57) Must reuse all metal parts
 (63) 62-65 only
 (73) Lowers must reuse metal parts
 (81) All with 2" main eye and 5/8" bolt
 (82) 66-76 only

HYPER-FLEX MASTER KIT

YEAR MAKE & MODEL PART# WEIGHT
 Price
66-76 A - Body Dart, Duster, Valiant, (Barracuda thru 69) 5.18104 8.4#
 $137.00
Includes Front control arm bushings, front strut rod bushings, front end link set,
lower control arm bump stop, rear leaf spring bushings, tie rod end boots
(does not include sway bar frame bushings or transmission mount bushings)

B - Body Charger, Coronet, Satelite, Roadrunner & Superbee

How do we define the word 'SET'.  
A 'SET' has enough bushings to do the left and right sides of vehicle.
Control arm bushing sets will also include lower & upper positions, if required.
YEAR
FRONT END CONTROL ARM BUSHING
SET
REAR LEAF SPRING BUSHING SET
STRUT ROD BUSHING SET
  
Cross
member Mount 		 
Front
Subframe Set
FRONT SWAY BAR FRAME BUSHINGS (PAIR)
Please measure the diameter of the sway bar before ordering.
FRONT ENDLINKS (PAIR)
 UPPER CONTROL ARM BUMP STOP SET
 		LOWER CONTROL ARM BUMP STOP SET
TIE-ROD BOOTS (PAIR)
 Torsion Bar Dust Boots (pr.)
You must reuse clips 		Ball joint Boot Set
(Upper & Lower)
65 - 69
Uppers & lowers
set
5.3112  
Lowers must re-use metal parts.
$55.00
5.3132
$45.00
Uppers only
5.2101 (25)
$51.00
5.2104 (26)
$51.00
order this part number if your car was an original 440 or 426 car from the factory, or you are using 'Super Stock' rear springs with 1.50" front 'Main Eye' spring eye.
5.7109
$21.00
*
*
 
1967-72 A-Body cars:
7/8"
5.5134
see picture below
$45.00
3.3#
5.5128  (7/8")
$13.00
0.4#
 This is the triangle shaped bushing that fits the O.E. brackets
15/16"
5.5135
see picture below
$45.00
3.3#
5.5129 (15/16")
$13.00
0.4#
This is the triangle shaped bushing that fits the O.E. brackets
9.8118
$18.00
9.9103
$9.00
 9.9119
$9.00
9.13101
$4.00

5.13101
 $8.00

5.13102
 $8.00
Weight
 1.5#
 2.0#
 0.8#

see above
 1.3#
 0.5#
 0.6#
 0.2#
 0.3#
 0.3#
70-72
Uppers & lowers
set
5.3112  
Lowers must re-use metal parts.
$55.00
5.3132
$45.00
Uppers only
5.2101 (25)
$51.00
5.2104 (26)
$51.00
order this part number if your car was an original 440 or 426 car from the factory, or you are using 'Super Stock' rear springs with 1.50" front 'Main Eye' spring eye.
5.7109
$21.00
N/A
N/A
5.5113(7/8")
$11.00 
5.5115(15/16")
$11.00
9.8120
$18.00
9.9103
$9.00
 		9.9119
$9.00
9.13101
$4.00

5.13101
 $8.00
5.13102
 $8.00
Weight
 1.5#
 2.0#
 0.8#

0.5#
 1.6#
 0.5#
 0.6#
 0.2#
 0.3#
 0.3#
 
73 - 79
5.3121
must re-use metal parts.
$29.00
5.2110
With OVAL main eye bushings only
 $73.00
5.7109
$21.00
 1973-74 only
5.4110
 comes with 4 washers &, 2 inner sleeves
& 4 bushings.
$27.00
5.4111
comes with 8 washers,
4 sleeves & 8 bushings
$102.00
5.5136 13/16"
5.5142 15/16"
$22.00
Endlink grommets
are included in 
5-5136
5-5142

9.9103
$9.00
 		9.9119
$9.00
9.13101
$4.00
5.13101
 $8.00
5.13102
 $8.00
Weight
 1.3#
 2.7#
 0.8#
 3.6#
 3.7#
 1.0#
 *
 0.5#
 0.6#
 0.2#
 0.3#
 0.3#
FOOTNOTES:
(5-4111)  This set has eight large bushings, four inner sleeves and 8 large flat washers.  It fits into 4 positions between the K-frame and subframe.
(25) Except 426 and 440 models.  This is for cars that came from the factory without 426 or 440 engines and super stock springs.
 (26) With factory 426 and 440 models and super stock springs.  Super stock springs have a smaller diameter front spring eye than the small block cars.
(29) greaseable sway bar bushings, to replace the O.E. style triangle shaped bushings, includes adaptor brackets( see picture below).
(57) Must reuse all metal parts
 (73) Lowers must reuse metal parts
 (81) All with 2" main eye and 5/8" bolt
 (82) 66-76 only
(114) With oval main eye bushings

5.5134

This is a picture of the new greaseable sway bar bushings and adaptor brackets that replace the triangle shaped O.E. bracket and bushings.
This greaseable set fits applications: 67-72 "A" body Dart, Demon, Barracuda;
65-69 "B" body Superbee, Roadrunner, etc.
  #5.5134 is 7/8" dia.
#5.5135 is 15/16" dia.
$45.00

HYPER-FLEX MASTER KIT

YEAR MAKE & MODEL PART# WEIGHT
 Price
65-72 B- Body Charger, Coronet, GTX, Roadrunner 5.18105 8.0#
 $130.00
Includes: Front control arm bushings, front strut rod bushings, front end link set,
lower control arm bump stop, rear leaf spring bushings, tie rod end boots
(does not include sway bar frame bushings or transmission mount bushings)
LEAF SPRING PAD SETS
YEAR AND MODEL
WITH RIBBED
SIDES
WITHOUT RIBBED
SIDES
WEIGHT
PRICE
1972-78 Full Size Chrysler and Imperial
1973-76 'B' Body: Charger, Coronet, Satellite, GTX, & Roadrunner(thru '75)
1973-76 'C' Body: Full Size Fury, Monaco and Polara
Replaces O.E. part number 3402379
5.6105
*
3.2#
$73.00
1976-80 'F' Body: Volare, Aspen, Roadrunner and R/T
1980-83 'J' Body: Mirada, Cordoba to '89
Replaces O.E. part number 3815207
*
5.6106
2.5#
$56.00

E - Body Challenger & Barracuda

How do we define the word 'SET'.  
A 'SET' has enough bushings to do the left and right sides of vehicle.
Control arm bushing sets will also include lower & upper positions, if required.
YEAR
FRONT END CONTROL ARM BUSHING SET(6)
 UPPER CONTROL ARM BUMP STOP SET(2)
REAR LEAF SPRING BUSHING SET(12)
STRUT ROD BUSHING SET(4)
FRONT SWAY BAR BAR FRAME BUSHINGS (PAIR)
Please measure the diameter of the sway bar before ordering.
FRONT ENDLINKS (PAIR)
 LOWER CONTROL ARM BUMP STOP SET-(2)
TIE ROD BOOTS (PAIR)
 Torsion Bar Dust Boots (pr.)
You must reuse clips 		Ball joint Boot Set
(Upper & Lower)
70 - 74
Uppers & lowers
set
5.3112  
Lowers must re-use metal parts.
$55.00
5.3132
$45.00
Uppers only
9.9103
$9.00
5.2101 (25)
$51.00
5.2104 (26)
$51.00
order this part number if your car was an original 440 or 426 car from the factory, or you are using 'Super Stock' rear springs with 1.50" front 'Main Eye' spring eye.
5.7109
$21.00
5.5113 (7/8")
5.5115 (15/16")
$11.00
9.8120
$18.00
9.9119
$9.00
9.13101
$4.00
  5.13101
 $8.00
  5.13102
 $8.00
Weight
 1.5#
 0.5#
 2.0#
 0.8#
 0.5#
 1.6#
 0.6#
 0.2#
 0.3#
 0.3#
(25) Except 426 and 440 models.  This is for cars that came from the factory without 426 or 440 engines and super stock springs.
(26) With factory 426 and 440 models and super stock springs.  Super stock springs have a smaller diameter front spring eye than the small block cars.
(29) greaseable sway bar bushings, to replace the O.E. style triangle shaped bushings, includes adaptor brackets( see picture below).
(27) 65-72
 (28) 73-76
 (63) 62-65 only
 (73) Lowers must reuse metal parts
 (81) All with 2" main eye and 5/8" bolt
 (82) 66-76 only

The torsion bar boots and balljoint boot sets will fit '62 to '79 A, B, & E bodies.

HYPER-FLEX MASTER KIT

YEAR MAKE & MODEL PART# WEIGHT
 Price
70-74 E- Body Barracuda, Challenger 5.18105 8.0#
 $130.00
Includes Front control arm bushings, front strut rod bushings, front end link set,
lower control arm bump stop, rear leaf spring bushings, tie rod end boots
(does not include sway bar frame bushings or transmission mount bushings)

VIPER

YEAR
FRONT CONTROL ARM
BUSHINGS
REAR CONTROL ARM
BUSHINGS
 GREASEABLE FRONT
SWAY BAR
BUSHINGS
Please measure the diameter of
the sway bar before ordering.
GRESASEABLE REAR
SWAY BAR
BUSHINGS
Please measure the diameter of
the sway bar before ordering.
1992-98
N/A
 N/A

5.5138
1-1/16"
$19.00
5.5139
 7/8"
$19.00
Weight

0.9#
 0.9#

Volare, Diplomat & Aspen

How do we define the word 'SET'.  
A 'SET' has enough bushings to do the left and right sides of vehicle.
Control arm bushing sets will also include lower & upper positions,
if required.
YEAR AND MODEL
FRONT CONTROL ARM
BUSHING SET
FRONT SWAY BAR
BUSHING SET
Please measure the diameter of
the sway bar before ordering.
76 - 80 Volare
 76 -79 Aspen
 77 - 79 Diplomat
 80 - 83 Cordoba/Mirada