Suspension Restoration Parts Energy Suspension
We have all these polyurethane bushings bushings in stock in the color
Black Graphite Impregnated.
 Red is available as a special order, allow 4-6 weeks for delivery.
If you wanted it today, you should have ordered it from us yesterday.

GREASEABLE SWAY BAR BUSHINGS
&
SWAY BAR ENDLINKS
Go back to the index page

Do you need to order sway bar frame bushings?
 Be sure to measure the diameter of the sway bar before calling us.  
Measure the sway bar in a straight portion of the sway bar, usually in the middle.
 Even better, measure where the bushing  fits over the sway bar.  
Grab a caliper and measure the diameter.  
If you do not have a caliper, then grab a handfull of open end wrenches.  
Try each one, until you find the one that fits the tightest.
 Look at the size of the wrench, this is the diameter of the sway bar.
If you do not have open end wrenches, then grab an adjustable wrench(crescent wrench)
and tighten the jaws down over the sway bar,
and measure across the jaws with a tape measure or ruler.
 Now, do this again and do it one more time.  You want the best two out of three measurements(they should be the same)
Do not try to measure the diameter of the sway bar with just a tape measure or ruler,
unless you understand this (cir ÷ pi=diameter).
If you can't do any of the above, you should not be installing the bushings.
Grab your car keys and take the car to a compentent mechanic.

Finally, sway bar bushings that can be greased on the car, so they won't squeak.
They come complete with there own zerk fittings and utilize a unique channel design that allows grease to migrate to all inner bushing surfaces.
This innovative new design will virtually eliminate any possible binding, even under extreme pressures created by large diameter bars.
These are the ...'Quiet Ones" from Energy Suspension.

Suspension Restoration Parts Co. stocks the 'Graphite-impregnated -G-(black) bushings.
Some people mistakenly think, that all part numbers that end in the letter -G-, are greaseable. They are not!
Example of part number: 9-5161-G and the breakdown of each number and letter.
9 = Universal series
51 or 52 = this is a stabilizer frame bushing
61 = the diameter of the hole in the bushing - 1.00", in this case.
G = black color only, usually graphite-impregnated, but it may not be.  It all depends on application.
The last letter of the part number indicates the color of the bushing.
R = Red
G = Black, usually graphite-impregnated
Before there were greaseable bushings, the 9-5161-G would have been a 9-5110-G.
the difference between greaseable and non-greaseable, is the 61 and the 10.

This is an old picture of some of the different sway bar bushings Energy Suspension makes(before they made the greaseable sway bar bushings).
The only colors made today, are Black or Red

IF YOU DO NOT SEE A PART NUMBER,
THAT MEANS THE PART IS NOT AVAILABLE,
HAS NEVER BEEN MADE AND DOES NOT EXIST.   duh!

Sway Bar Diameter
Universal Series
Greaseable Sway Bar Set
G.M. Truck style
GREASEABLE SET
Universal Series
Small Bracket
Style,
Designed for
Import
Applications.
Not Greaseable
We stock all these
available sizes.

Each part number
equals
2) frame brackets
2) bushings
 GREASEABLE SWAY BAR BUSHING BRACKET
(15.12.06.39)

lg_gsbb.jpg
(15.12.  .39)

sm_sbb.jpg
(15.12.0 .39)
PRICE
 $19.00 pr. $21.00 pr. $17.00 pr.
7/16"/11 mm
9.5151

1/2"/13 mm
9.5152

9/16"/14 mm
9.5153

5/8"/16mm
9.5154
(5333)
9.5120
17 mm

9.5121
11/16"/17.5 mm
9.5155
(5334)

18 mm

9.5122
3/4"/19mm
9.5156
(5335)
9.5123
20 mm

9.5124
13/16"/20.5 mm
9.5157

21 mm

9.5125
7/8"/22 mm
9.5158
9.5126
23mm
9.5159
9.5127
15/16"/24mm
9.5160
9.5128
1"/25 mm
9.5161
(5340)
9.5129
1 - 1/16"/27 mm
9.5162
 9.5169
 9.5131
28mm
9.5163

1 - 1/8"/28.5 mm
9.5164
 9.5170
1-3/16"/ 30 mm

9.5171
1 - 1/4"/31.5 mm
9.5165
 9.5172
32mm
9.5166

1 - 5/16"/33 mm
9.5167

1 - 3/8"/35 mm 9.5168 9.5173

Weight

Suspension Restoration Parts is now STOCKING all sizes of the BLACK graphite-impregated greaseable sway bar bushings.
greaseable  
G.M. truck greasable sway bar bushing on the left and
universal style greasable style bushing on the right

2) Metal brackets & 2) bushings are included with sway bar sets
GREASEABLE SET #
G.M. Truck style,
set includes
Pair of frame & endlink bushings
SWAY BAR
DIAMETER

lg_gsbb.jpg


3.5175 ($33.00)
1 - 1/16"
3.5176 ($33.00)
1 - 1/8"
3.5177 ($33.00)
1 - 1/4"
3.5178 ($33.00)
1 - 1/4"
3.5179 ($33.00)
1 - 1/16"
3.5180 ($33.00)
1 - 1/1/4"
Weight
 2.4#
one pair of GREASEABLE SET  
sway bar frame bushings with brackets.
G.M. Truck style,
also used on
Chevy Caprice &
Ford Crown Victoria.
Pair of frame bushings only
SWAY BAR
DIAMETER
9.5169 ($21.00)
1-1/16" /27mm
9.5170 ($21.00)
1-1/8" /28.5mm
9.5171 ($21.00)
1-3/16" /30mm
9.5172 ($21.00)
1-1/4" /31.5mm
9.5173 ($21.00)
1-3/8" /35mm
Weight
 1.2#

SWAY BAR ENDLINK SETS
Set= left & right sides
For Vehicle Applications Not Listed
Correct Way To Measure Your End Link
To measure for correct fit, vehicle must be on level ground (not jacked up).
Make sure stabilizer bar end eyelet (B) is parallel with control arm (C).
Many times they are not.
You may be able to use a little longer or shorter sleeve length than the original.
Measure sleeve length (A) and compare to chart.
Complete end link set includes grommets and all hardware for both sides of the sway bar.
Grommets & washers are the same as 9-8105.
"A"
or sleeve
Length
 BOLT
Length
 		WEIGHT
Set
Number
PRICE
1"
 5.00"
 1.1#
9.8122
$18.00
PAIR
1-5/8"
 5.25"
 1.6#
9.8120
$18.00
PAIR
2"
 6.00"
 1.2#
9.8123
$18.00
PAIR
2-3/8"
 7.00"
 1.3#
9.8125
$18.00
PAIR
2-5/8"
 7.00"
 1.3#
9.8117
$18.00
PAIR
2-7/8"
 7.00"
 1.3#
9.8118
$18.00
PAIR
3-3/8"
 7.50"
 1.4#
9.8119
$18.00
PAIR
3-9/16"
 7.50"
 1.4#
9.8124
$18.00
PAIR
4-1/4"
 8.25"
 1.5#
9.8149
$18.00
PAIR
4-1/2"
 8.25"
 1.5#
9.8121
$18.00
PAIR
5-5/8"
 9.50"
 2.0#
 PROTHANE
brand only
19-419-BL
 $23.00
PAIR

grade 5
 3/8" USS x ?



The bolt length information is meant
to be used for custom applications only.

End link "grommets only"

9.8103
(4803)
 Full size truck style
(sometimes referred to as the Ford style grommet)
4 - per set
I.D. - 7/`6"
Nipple O.D. - 7/8"
O.D. - 1 1/4"
Weight 0.3#
$6.00
9.8106
(8072)
 Cars & mini trucks
with 1" O.D.
8 per set
I.D. - 3/8"
Nipple O.D. - 5/8"
O.D. - 1"
Weight 0.3#
$8.00

 HEAVY DUTY END LINK SET

9.8105
(4806)
(15.03.01.39)
 Set fits most domestic application cars and mini trucks.
Also for import models that use conventional style end link system.
Set includes 8 grommets and 8 heavy gauge washers designed for Hi-performance.
(considered the "universal style" grommets, fits most G.M., FOMOCO, Mopar cars & trucks)
This part number is used on all the complete endlink sets above.
I.D. - 3/8"
Nipple I.D. - 11/16"
O.D. - 1 1/8"
Weight 0.6#
$10.00

'Suspension' suggestions and info page 

PRODUCT WEIGHT
is now included in the charts above.  
1.2# means that the part number listed weighs 1 pound & 2 tenths of a pound.
We are giving this measurement, because this is how Energy Suspension has chosen to give us the weight of each part number.
1 Pound(lb.or #) = 16 ounces(oz.) divided by 10 = 1.6 oz.  
This is not the shipping weight, just the weight of the part.  
To estimate your shipping cost, you should round up to the next pound and usually add about a pound for shipping weight.  
When we ship via UPS(United Parcel Service) we have to round up to the next pound.
  UPS does not accept ounce weight, or increments of tenths.  
We will always weigh your order on an electronic scale and charge you for the exact weight, rounded up to the next pound.  
For USPS(United States Postal Service) shipping we also round up to the next pound.

ABOUT THE COST OF SHIPPING VIA
UPS (United Parcel Service)
 AS OF MARCH 1, 2008,
 We are providing you with this information, so that you can ESTIMATE your shipping cost before you place your order.
The prices in the table below represent the cost of shipping a package from our warehouse in
Modesto, California to a residential address in Maine, the furthest point from CA.
UPS will charge extra for some rural addresses.
If your address is in a zone west of the east coast zone(Maine to Florida), say in the Midwest or on the West Coast, your shipping cost will be less.
Of course Alaska & Hawaii are exceptions, call us for the rates.
When UPS charges us less to ship to your address, we will charge you less.
If they charge us more than is on the chart below, we charge you more.
We charge you the exact cost of shipping. 
After you have placed your order:
1. We will weigh your order
2. Put the weight and your address into the UPS shipping computer
3. Assign the level of shipping you request, Ground, 1 day, 2 day or 3 day
4. Enter the value if it is over $100.00
5. Charge you exactly what the UPS computer says it will cost to ship your order to you.
It is NOT our goal to make money off of shipping.
The UPS prices below are ESTIMATES. 
They do not include rural surcharges that could apply to some addresses.
For Alaska & Hawaii please call us for rates.
YOUR SHIPPING OPTIONS
PACKAGE WEIGHT
 United Parcel Service
UPS
GROUND
Modesto, CA. to Maine
 UPS
3 DAY AIR
Modesto, CA. to Maine
 UPS
2 DAY AIR
Modesto, CA. to Maine
 UPS
1 DAY AIR
Modesto, CA. to Maine
United States Postal Service
USPS PRIORITY MAIL
DELIVERY TO ANY USA
ADDRESSES ONLY.
(2 - 4 DAYS)
For over seas orders
See the USPS website: http://ircalc.usps.gov/
to calculate the cost to ship your order to your country.
 United States Postal Service
USPS FLAT RATE BOX SPECIFICATIONS
AND
INSURANCE INFORMATION
1 POUND (1.0#)
 10.38
 18.42
 22.77
 49.83
$5.00
 UNITED STATES POSTAL SERVICE (USPS)
Required USPS boxes for flat rate service:
USPS PRIORITY BOXES

Box #1 = 11-7/8 x 3-3/8 x 13-5/8 inches
$9.25
Box #2 = 11 x 8-1/2 x 5-1/2 inches.
$9.25
New even bigger Flat Rate Box now available
Box #3 = 12" x 12" x 5-1/5"
$13.25
Rates are for USA addresses only.
Flat rate service is available for Canada
and some other countries at an increased cost.
See this website: http://ircalc.usps.gov/
for rates to your country.
There is not a weight limit for USPS flat rate boxes, but there is a limit as to how much we can fit into USPS flat rate boxes.
United Parcel Service(UPS) includes insurance.

USPS does NOT include INSURANCE.
If USPS loses your package and your order is not insured,
you will have to place another order. 
We will not offer to pay for the lost part or for another shipment.
If you want to add insurance to your USPS shipment,
ask us for it.
Here are the USPS insurance rates:
$0.01 TO $50.00 value of your order
$1.65
$50.01 TO $100.00 value of your order
$2.05
$100.01 to $200.00 value of your order.
$2.45

A note about USPS shipments.  The USPS carrier usually picks up packages at out business first thing every morning Monday - Friday (we are not open Saturday or Sunday).  This usually means that your order will not leave until the next day, so figure on 3-4 days for delivery.
2 POUNDS (2.0#)
 11.25
 20.60
 25.69
 54.87
$7.75
3 POUNDS (3.0#)
 11.97
 22.77
 28.62
 59.48
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.
$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
4 POUNDS (4.0#)
 12.43
 24.71
 31.79
 64.52
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.
$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
5 POUNDS (5.0#)
 12.90
 26.57
 35.41
 69.12
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.
$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
6 POUNDS (6.0#)
 13.18
 28.75
 38.20
 74.16
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.
$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
7 POUNDS (7.0#)
 13.58
 30.99
 41.44
 78.77
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.
$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
8 POUNDS (8.0#)
 14.13
 33.29
 44.98
 83.43
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.
$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
9 POUNDS ( 9.0#)
 14.75
 35.41
 48.85
 88.41
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.
$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
10 POUNDS (10.0#)
 15.42
 37.64
 52.38
 93.39
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.
$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.

UPS INSURANCE
is included for the first $100.00 value
For orders over $100.00 please add:
 $1.20 per $100.00 value
 $2.50 per $100.00 value
 		$2.50 per $100.00 value
 		$2.50 per $100.00 value
 		INSURANCE IS NOT INCLUDED WITH USPS SHIPMENTS.
YOU MUST REQUEST INSURANCE COVERAGE.
We accept:
Visa, MasterCard, American Express or Discover credit cards.
At this time, we do not accept PayPal.
To process your order we will need:
1. Your NAME as it appears on the credit card.
2. The BILLING address of the credit card.
3. Your PHONE number
4. The CREDIT CARD number
5. The EXPIRATION date of the credit card.
6. The three(3) digit CVV2 security code on the BACK of the credit card.
7. How do you want us to ship your order?
Yes, you can give us an alternate ship to address.  But we must have the billing address to process your order.
FOR OUR INTERNATIONAL CUSTOMERS
For international orders we normally ship via the United States Postal Service(USPS).
  United Parcel Service(UPS)next day air and second day air is also available, upon request.
Every countries Customs authorities require us to declare the parts we sell to you as merchandise. 
We are required to send a commercial invoice that lists the value of each part ordered.
We will charge you for the value of the parts plus the cost of shipping to you.
We will not show a reduced price on the invoice or declare the parts as gifts or samples.
 You are responsible for all of your countries duties and taxes.
If you want an estimate of the cost of shipping:
1. Add up the total weight of the parts you want to order(the weight is under every part number),
add 1 pound for packaging material.
 2. Go to the USPS website http://ircalc.usps.gov/ and enter the country where you want the parts shipped.
3. Enter the weight of your order.
4. Check out the different shipping options, and choose the one that is best for you.

Call us with your order, or we would prefer that you EMAIL your order to sales@suspension.com.
This way we will know the correct spelling of your name and address.

We only stock these bushings in the color black.
Yes, we have all of these bushings in stock, for immediate shipment.
But, remember, if you wanted it today, you should have ordered it from SUSPENSION yesterday.

California residents please add 7.375% sales tax.
We normally ship via U.P.S. within the U.S.A.
U.S.P.S. Priority Mail is available upon request

Suspension Restoration Parts Co.
319-C Motor City Ct.
Modesto, California 95356 USA
East Coast Hours: 11:00 A.M. to 8:00 P.M.(EST)  Monday - Friday
 West Coast Hours: 8:00 a.m. to 5:00 p.m (PST) Monday - Friday.

(209) 578-5101 Tech questions & order line. 
8:00 AM to 5:00 PM(PST), M-F.
(800) 291-5340 Orders Only.  8:00 A.M. - 5:00 P.M.(PST) Monday - Friday.
NO tech questions answered here.
(209) 578-0562 (FAX) Anytime




Copyright © 2008 SUSPENSION RESTORATION PARTS CO. All Rights Reserved